1 / 5
Print In Place & Parametric Wristband for your projects
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this parametric design to create a wristband for your projects . Choose the width and number of links. [Fusion 360]
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
Print In Place & Parametric Wristband for your projects
by Earthworm Jon
Use this design to create and make a print in place wristband to fit your project and wrist!
Basic Instructions
- Open the designs in Fusion 360.
- Change the width of the wristband or the number of links by going to “Modify” and then “Change parameters”.
- Export as STL, slice and print!
- Attach each part of the wristband to your existing model by using a short piece of 1.75mm filament as a pin.
Please note there are some problems with the tolerance parameter at the moment but leaving it at the default 0.5mm should work for you.
| Parameter Name | Default Value | Min | Max |
| NumberOfLinks | 5 | 1 | No limit |
| LinkWidth | 20mm | 12mm | No limit |
Design Guidelines
For the wristband to work with your designs, see the diagram. For the filament pinhole, use a 2.10mm hole or so.