1 / 5
Print In Place & Parametric Wristband for your projects — image 1
1 / 5

Print In Place & Parametric Wristband for your projects

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Use this parametric design to create a wristband for your projects . Choose the width and number of links. [Fusion 360]

Rating
0 / 5
Likes
21
Downloads
120
Makes
0
Views
795
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Print In Place & Parametric Wristband for your projects

by Earthworm Jon

 

Use this design to create and make a print in place wristband to fit your project and wrist!

Basic Instructions

  1. Open the designs in Fusion 360.
  2. Change the width of the wristband or the number of links by going to “Modify” and then “Change parameters”.
  3. Export as STL, slice and print!
  4. Attach each part of the wristband to your existing model by using a short piece of 1.75mm filament as a pin.

Please note there are some problems with the tolerance parameter at the moment but leaving it at the default 0.5mm should work for you.

Parameter NameDefault ValueMinMax
NumberOfLinks51No limit
LinkWidth20mm12mmNo limit

Design Guidelines

For the wristband to work with your designs, see the diagram. For the filament pinhole, use a 2.10mm hole or so.

Tags