4,436 models
Simple strap clamp corners for miter joints, framing, drawers or box making. Print twice to make one corner clamp. The two halves can be glued. Dimensioned for 25mm (1 inch) bands, easy to scale to any other width.
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…
This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on…
Pony ears and unicorn horn for My Little Pony or Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Printing PLA is fine for these parts.…
Diameter 120 mm, you can scale up to larger sizes.
Made these for a Shrek rave I went to Made with Vanilla White Prusament and painted green Needs supports because the ears are wider than the headband
UPDATE: Check out my new and improved version here . I designed this display case to hold and showcase nine Apple Watch bands at a time. It is designed to fit most band types and lengths, though there are many first party and third party…
Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…
Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…
This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Step into the world of Lilo & Stitch with this original 3D printable headband inspired by everyone’s favorite alien, Stitch! The model is designed for easy printing on standard FDM printers and offers a comfortable fit. The ears are…
Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…
Hello, Today I have a New Year's Headband for you 2026 . A great accessory for a New Year's party. Suitable for group photos. I used ASA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are…
This is a replacement headband for the Razer Kraken X with functional adjustability! I recommend printing with PETG because PLA is too stiff, but you do you. To get the side pieces off the original headband, you need to use a thin metal…
The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…
A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. Print instructions This toy car is easy to 3D-print and quick to build. It is the first project demonstrating the new and fully 3D-printable…
Rubber band powered gun for launching a glider. Minimalistic model for a small consumption of material. Easy to print and assembly. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Body, Cover and Trigger need to be printed…
Shelf system for miniatures showing in 8 variations. This shelfs are lightweight option for display miniatures and can be combined together as you need. Valentine headband in doll size (1:6) with shape of three hearts. Printing from PLA,…
A holder for 15 Apple Watch bands or any watch bands that you may have! Notes: Printed with Hatchbox Wood PLA, sanded, and then stained. I still have to work on my retraction settings to prevent any oozing.
Hello! This Glider has been based off one the worlds most sold aircraft since 1986, the Airbus A320 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane…
A print of the Surgical Mask Tension Release Band for Ear Comfort & Extended Use from the NIH website. Perfect for the Prusa Mini. https://3dprint.nih.gov/discover/3dpx-013410 No nurse/tech/doctor will refuse these. Contact your local…
I made this rubber band based catapul which can shoot up to twenty meters without any problems. It is very easy and fast to print and build. You just need to find a rubber band… Have fun!
Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file
EN: Purely functional simple EZ to print hairband, nothing special. CZ: Funkční, jednoduchá čelenka, tiskne se OK.
No support needed, stick some nice googly eyes :) tip for prusa mini : remove the skirt, you can print it at 100% (adult size)
Holder for Dremel 1/2" and 1/4" Dremel sanding bands, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Apple Watch bands seem to multiply. This storage system is seamlessly expandable, fast to print, and adaptable. I made these slots to be slightly angled so you can see the band easier from the front or the side. The slots are also…
Do you need a clip that's not only reusable but also better than the original onces? Well then this is perfect for you, this reusable/adjustable wristband clip. it's designed to be easy to use and comfortable to wear! How to use: To use…
Headband in doll size with shape of cat ears. Printing from PLA, without supports, layer height 0.2 mm.
Držák hodinek Xiaomi Mi Band 6
A headband with tentaclesis a must-have for your party. No glue is needed, but it can be useful. You can print the tentacles as I uploaded, it will increase its strength in the narrow part. Just add supports. Or upload my project where…
Primera versión de llaveros con logos de bandas de rock. Banda AC/DC Imprimir a dos tonos. Espero les guste.
Birthday GIRL - Hairband Just scale it to the size you want The print file is scaled at 97% The test print (test print for accuracy of fit) STL is intended to test the correct size (scaling) so that the Hairband fit well The print file in…
A simple clip to secure elastic bandages used to heal sprains. Printed in PLA with 100% infill and adaptive layer height.
The bat and the spider are printed in flexible filament to ensure they don't break easly, and they are glued to the head band (printed in PETG) with cyanoacrylate. The red color on mouth, eyes and teeth are painted with red nail polish.…
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
My daughter uses this to hold a wedding veil on her doll's head.
Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…
edit: There is an improved version designed for PETG now. If you own the headset, you probably already know the original headband is very prone to cracking. There is already rudimentary replacement part out there but I wanted nice,…
Since many of you had problems with attaching the Shield to the face with rubber bands we proudly release our Remix for a Headband. It is tested by medical personal and has the big advantage of not giving you pressure points anymore,…
Recommend printing on it's side with text upright.
A similar MagicBand 2 Puck Holder was shared on Thingiverse a while back but has since been removed. I recreated that design in Fusion360. This works with most bands up to 25mm wide and has been tested on the Apple Watch Sport Band, Sport…
increíble diseño aesthetic. Esta bandeja esta creada por la necesidad de tener un sitio a la entrada de casa para dejar objetos pequeños (llaves, monedas…) largo exterior: 122.04 mm Ancho exterior: 67.29 mm Grosor: 10.02 mm Largo…
This is a little complex design developed for the Prusa Face Shield where, sometimes, the rubber band is difficult to found. This adjustable headband is a part and originally intended for a helmet in a project where I worked on its…
Bring your own metal headband (headdress), print two wings and assemble.
Evil pony ears and unicorn horn for My Little Pony Queen Chrysalis or Dark Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Wednesday…
🌸🐰 3D printed headband with cute bunny ears! 🐰🌸 Perfect accessory for Easter 🐇, celebrations 🥳 or just for fun! 🐰 One ear is bent for extra flair! Diameter 120 mm, you can scale up to larger sizes.
Remix of Prusa FaceShield RC3 redesigned for 0.6mm nozzle printing. The stl file contains stacked version with a gap of 0.4mm designed to be printed with layer height 0.4mm. Version with and without logo (slightly faster printing) is…
Bust of Vesna Moon, the Queen of the Autum Jam Festival. An amalgamation of festival types all rolled into one. The decorated winter cap is primo. I thought about incorporating a hula hoop… but it just got to busy. And The Tassels...…
This is hair band with changeable decoration.
Serre-tete renne Le père Noël a perdu ses rennes ? Voici de quoi reconstituer son équipage ! Le serre-tête peut être imprimé sans remplissage et sans support.(Oh Oh Oh). Si vous aimez ma création... cliquez sur j'aime ! Si vous voulez…
I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…
Tape Abroller und Deko zugleich. Diese Schnecke sieht auf dem Schreibtisch nicht nur niedlich aus, sondern hält auch immer etwas Klebeband bereit. Auf der einen Seite Praktisch, auf der anderen Seite Schick. Der Plug verhindert das das…
My version of Leela's wristband computer with holes for magnets to hold together Used a stack of three 2x1mm neodymium magnets in each hole (24 total holes) Print instructions NEEDS a brim because of very thin bed contact Recommend…
This rubber band-powered car is easy to build and even easier to use. It is an original design which features a 5:1 beveled gear ratio, a print in place bearing, a locking mechanism and is wound up by a powered drill! Notes: .gcode and…
So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…
Description Rubber band loaded Business Card DISPENSER This is a dispenser of Business Cards which used rubber bands for a “spring-loaded” mechanism. The main idea got from Honza, so go visit his profile to see his other designs. Honza |…
This Apple Watch band holder can mount on a wall or cabinet door using the convenient screw holes (perfectly optimized for a #6 wood screw), or your favourite mounting tape. You can store multiple bands in each section; the convenient…
A headband made from 3 pieces. Two identical flex pieces to make the band and a size adjustor. Is reasonably comfortable. Could serve as a replacement for when elastic bands are out of stock. Could also be disinfected better. However the…
Bandeja apoyabrazos MG ZS Hybrid+. Atención solo sirve para el modelo Hybrid+ 2024 - 2025. MG ZS Hybrid+ armrest tray.
Turn your Magic Band v2 bracelet into a sturdy keychain. 1.) 3D print this keychain using PETG, 90%+ infill (solid), <= 0.15mm layer height, and no supports. Orient the "face" of the keychain toward the bed, and the "back" upward. I used…
Christmas headbands in doll size (1:6) with shape of tree, deer and gift. Printing from PLA, without supports, layer height 0.2 mm. You can mix and match more headbands together.
Stand with imperial logo for the Bandai Death Star 2 / Star Destroyer model kit. Print instructions: Print at 100% infill No supports 0.15mm
This is a remix of “Just a hair band” by Raybo with a small improvement for kitty lovers:-)
This model is based on the band Depeche Mode - Violator. Some edits were made at certain points to make editing easier. A PLA printed earring. I recommend reducing the printing speed to 80% either from the machine or the program you are…
Since Ava does not sell replacement wristbands for the Ava fertility tracker I created this simple adapter for generic 16mm wristbands. This part is designed to be a very tight fit, since the bottom layer is quite thin to ensure proper…
watch bend for 20 and 22mm watch, but stil easy to change that in slicer. If it does not fit good just add or remove one piece of it to the line and than you can littlebit change the lenght of it. suggestion: print with 50% infill 0.15…
The headband of my Koss KPH30i broke so I created my own replacement part. Why use tape or glue when you have a 3D printer. :) This also gets rid of the rather strong clamping force of the stock headband. Other mods: Yaxi Pads MMCX…
A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw. Edit 3/31/24: Added 2 files for 6mm longer cut length in the…
It is possible to use any type of: rubbers bandages, tested up to 25mm thickness elastic tapes with / without holes This version is based on the "fast" RC32 edition from 1.4.2020 Print instructions Same instruction, as original RC32: 3…
A classical Möbius band , oriented so it is really easy to print with organic supports. The chosen orientation might be counterintuitive, but ensures a smooth band surface by putting all the (organic) supports on the border of the band.…
Want an easier way to find records in your vinyl record collection? Consider adding a few or several of these letter-labeled dividers, along with tabs for specific bands of your choosing, printed on your Prusa XL Multi-Tool or other large…
I printed from PETG diagonally on a 220 × 220 mm plate. It fits my four-year-old daughter perfectly. Ears (Pinterest)
Those pesky gray aliens are messing with earth again. Better download the easiest rubber band pistol to assemble on prusaprinters.org… Infact its ready to shoot out of the printer. “Elastic Eagle MKI” -…
This is a Ninjago (headband) emblem. Created it for my sons 5th birthday party. After an extensive ninja training they received their headbands that had these emblems sawn on. Kids loved them! Printed in PLA Gold + Black to create the…
This is a headband featuring a spinning dreidel (sevivon) for your next Hanukkah party! The dreidel is removable from the headband and will spin by itself, so you'll always be ready for a quick game! Update 2022-12-25: There is now a dual…
Dice Tower | One-Armed Bandit with Functional Lever for Dice Release This model remindes of a one-armed bandit in the casino. You roll the dice inside the tower. When you pull the lever, the dice fall out and you can see the result! The…
This is an Apple Watch Band Holder in different sizes (1-4 Bands). It is tested with following bands (all 42mm/44mm): Apple Sport Band Apple Sport Loop Band from BandWerk I assume it will fit many other (if not all) Apple Watch bands as…
This watchband is designed for "IRONY" from swatch. It could be fit to other watches with 23mm width watchband. You need only a 3D Printer and 1.75mm Filament for this watchband. Print instructions Print some parts of segments dependent…
I've slowly acquired a pile of Apple Watch bands (most of which are off-brand, don't worry I didn’t waste my money haha). But after seeing them all piled up I decided they needed a better home. Thus, I've created a tiny little coat hanger…
Halloween headband with a black cat ears, a pumpkin and a bat. The headband is suitable as a fashion accessory for a Halloween party. On a small scale it can also be used for dolls. The diameter 15 centimeters (original size) is suitable…
A Headband for Easter-Time. Different Versions are available: Version 1: Easterbunny-Headband without Inlays: If You want the same Inlay Effect as with the inlay Version: Print Settings: 4 Perimeters No Bottom Layers No Top Layers Take an…
Segunda versión de llavero con logos de bandas de rock. Banda KISS. Imprimir a dos tonos. Espero les guste.
UPDATE New version 2.2 (more bleow) This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. This print uses Voodoo magic to enhance print speed while still producing a good quality…
I wanted a guide to help me use the bandsaw to cut out curves more accurately. Instead of following a line drawn on the wood I place a template on the surface, the guide follows that template exactly. This uses 1 Magswitch GripRight 90…
The heart headband is suitable as a fashion accessory. The uploaded size is suitable for children or for a smaller head diameter, adults can increase the size as needed - it always fits on the printing plate. Printing from PLA, without…
My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…
I got tired of looking for the box of bandaids so I decided to build a “holder” to encourage people seeking bandaids to take only one instead of the whole box. I used double back tape to mount it on the inside of the cabinet door where…
Insert was designed for a 19mm diameter wedding band, but the print is flexible enough to adjust for other sizes. Printed in natural PETG and is virtually invisible on light skin tones. Supports are required.
By popular demand, not saying it was my daughter, I bring the bling. As usual, print with multicolor or manual color change just above the 1.8mm layer. Print bottom part in clear (works really well), black or white. Red suggested for the…
Use this to store your rubber bands, sorted by size. Fits four different lengths of rubber bands. Added the Fusion360 file, if needed to adapt.
A triply twisted Möbius band , oriented so it is really easy to print with organic supports. The chosen orientation might be counterintuitive, but ensures a smooth band surface by putting all the (organic) supports on the border of the…
If you're anything like me, you nick your hands all of the time pursuing this hobby, so a small first-aid kit with bandages and Neosporin is something that we should all keep handy. Although, I will admit that my hands are doing much…
With this bandsaw jig you can measure if the saw is parallel to the fence. You need a 10x2mm magnet (2mm thickness), which is glued into the hole with super glue. When mounted to the blade you can check whether the fence is parallel to…
Čelenka do vlasů se sobími rohy.
