*Hinged* Bandage Box
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.89 – €5.98 net (excluding VAT)
For file: BandageBox_0.2mm_PETG_MINI_5h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.44 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 5.61 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Reverse-Engineered Bandage Box for Use as a Minimalist First-Aid Kit.
- Rating
- 4.667 / 5
- Likes
- 45
- Downloads
- 124
- Makes
- 3
- Views
- 941
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're anything like me, you nick your hands all of the time pursuing this hobby, so a small first-aid kit with bandages and Neosporin is something that we should all keep handy. Although, I will admit that my hands are doing much better since the introduction of the spring steel build sheet, I hurt myself a lot less.
Please see the Bandage Box Mk. I for the nostalgic story of my childhood that caused me to design this model. In a nutshell, it's a recreation of a useful but discontinued product.
Construction Instructions
- Print 1 of each object
- Insert the connector into the slot on each side, lining up the tiny notches horizontally with the gap between the top and bottom
Construction Notes
- I have only printed this in PET-G. I don't believe PLA will work based on my failed attempt during design of the Bandage Box Mk. I, but have not retested
- Currently the connector slips a little when you open the lid. I believe this could be alleviated by using a drop of super-glue to fix it in place (on both top and bottom), but have not yet experimented
- The slip is not that bad – pushing a little on the box of the top after you close it in front fixes the problem. For me, the prime reason to add the hinge is to keep from losing the lid, and that part is working great
- I'm not happy with the way the connect "bows up: in the middle when you open the lid. I have added an experimental ribbed connector
- The slip is not that bad – pushing a little on the box of the top after you close it in front fixes the problem. For me, the prime reason to add the hinge is to keep from losing the lid, and that part is working great
- The connector should be a press fit, i.e., it should be hard (but not impossible) to insert into the slots in the top and bottom. That depends on a tolerance that cannot be exactly recreated on everyone's slightly different printer. Luckily, the connector only takes 8 minutes to print, so it shouldn't take long to get an exact fit by scaling it in your slicer and printing another one
Backstory
The Bandage Box Mk. I is the first design I made using Fusion 360 back in 2017 after Autodesk discontinued 123D (about one year after I got involved in making). In the end, it represented a compromise as I could not get the hinge to work back then. What changed between then and now is
- I have a lot more design experience
- I bought my own 3D printer which allowed me to switch from PLA to PET-G. The additional flexibility of PET-G (compared to PLA) allows the hinge to flex instead of breaking
I would like to take this opportunity to thank Prusa for running it's Sealable Boxes Contest. Win or lose, it provided the activation energy I needed to come back to this old design and get it to where I originally envisioned.