Counting matching models…
It is possible to use any type of: rubbers bandages, tested up to 25mm thickness elastic tapes with / without holes This version is based on the "fast" RC32 edition from 1.4.2020 Print instructions Same instruction, as original RC32: 3…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…
This is a portable container for adhesive bandages with a snapping lid. The inside dimensions are 17×32×90 mm. It’s compact and easy to carry, making it great for outdoor activities, hiking, camping, travel, or keeping in your car (don't…
Love the remix that Comrade 3D did, but I needed to add a built-in tensioner to flatten out the wrap as it's being rolled. The existing model is great, but I found I needed a 3rd hand to keep things tidy - this remix is to help with that!…
A simple clip to secure elastic bandages used to heal sprains. Printed in PLA with 100% infill and adaptive layer height.
Recommend printing on it's side with text upright.
Hi 3D printing friends! This design is a replica Band Aid I made just for fun. I had a crack on something that I didn't intend to repair and I thought this would be a funny way to cover it a bit but also draw attention :) You can heat up…
12/17/2023: Band-Aid/ bandage container V2 This is version 2 (V2) of a container to store bandaids. This specific one holds about 17 bandaids in each slot before it starts to get a bit tight, but you can increase the height of the model…
A simple bandage box designed for a common size of bandages (100mmx40mm, ~1.5inx4in). Smaller bandages will obviously fit too. The smallest usable length is about 60-70mm (2.5in). Any width up to 10mm (0.5in) will work well. It holds…
Band-aid shaped Bandage Storage Box with Sliding Lid This is just a simple box shaped like a band-aid with a sliding lid to store your bandages in. It fits bandages 35mm x 105mm or so. There is a little extra length on the ends due to the…
this model is thinked to be printed in parts. this need 3 bolts and screws or it can be glued.
Update 05.20.2024: I have recreated the model in Version 2. It is smaller and simpler, no more gluing necessary, less material consumption. Additionally, I have integrated a ratchet function, for which the two additional (ratchet) parts…
Easy to print bandage roller, no supports needed. I recommend printing it with a layer height of 0.2mm. Not sure if it works with boxing hand wraps
Bandages are something that are easy to bring, but hard to find when you don't have. Be prepared wherever you go with this handy holder. STL files are designed to hold up to 5 Band-Aids 40mm wide and 95mm long. The tapered opening is…
A quick stl to assist with the application of tube bandages to fingers or toes. When printing it you may need to brim the bottom and I used a custom support in the middle to help with the bridging of the top piece. Also worth checking it…
When I was a kid, bandages came in metal boxes. Which was cool, because you could throw a small tube of Neosporin into the box and poof -- instant first aid kit. At some point, the bandage companies switched to flimsy cardboard boxes,…
If you're anything like me, you nick your hands all of the time pursuing this hobby, so a small first-aid kit with bandages and Neosporin is something that we should all keep handy. Although, I will admit that my hands are doing much…
This is a 3D printed lever to make an emergency bandage (similar to the so-called "israeli bandage"), which we call an "emergency compression lever" See our git page…
horse_bandages_for_horse_schleich
This model is compatible with the lego system.
I didn't want to rummage around looking for bandages, so I created this organizer. All the sizes are available in one spot for easy selection. January 22, 2024: Added organizer without cross. 0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01
DISCLAIMER - TL;DR: This is a simple replacement for the metal clips that keep an ACE bandage in place. If you find this print not meeting your expectations, I refer you to the scene where Willy Wonka has the children sign the contract…
Holder for common sizes medical bandages. Two parts should be glued together
Two sizes of band aid holder that can be added to a key ring. 0.6mm nozzle, 0.2mm layer, PLA, Sovol SV01
Designed this box to hold band-aids and other similar types of bandages. It's designed dimension wise to fit within a medicine cabinet. It's 3 models in total so it can have the plus symbol on top printed in a different color if you choose.
A simple habit for bandages. Nozzle 0.4 Support NO Infil 20% Materials PETG you will need: super glue
Print tips There are two methods for printing the lid. Print in one go using file “lid_w_detail”. This requires supports that can be a little tricky to remove. The supported area is hidden when the box is closed so no loss of class…
This free 3D-printable Mummy Bust is perfect for Halloween decorations, horror enthusiasts, or anyone who loves Egyptian mythology. The bust showcases intricate bandage wraps and subtle details that bring an ancient, cursed mummy to life.…
It's a complete overhaul of a similar one I found. I added a handle, edited the crank to be more comfortable to insert the bandage and added a new clamp and hinge to tighten the bandage. Hinge is made of a single piece of filament, if…
Make boo-boo time less painful and store bandages in style! Locomotive also features a bobby pin holder!
For the robot contest my son had the idea to make a Baymax that can hold bandages and a lollipop inside. I haven’t had time to try printing this one yet, I made this in 24 hours, and I need to go to work. So it’s a work in progress but…
An attachment for a drill that will speed up rolling your pesky boxing bandages after washing. Simply slide in one ned into the slit and start the drill on low speed. You can print it with PLA laying on the side with the slit facing…
Keeps a few regular sized band aids from getting crumpled wherever you keep them.
A buddy of mine chopped off the tip of his finger, so I decided to cheer him up by making this prosthetic accessory. Print in ASA, ABS, or NYLON, and bend the temples carefully while still hot. Attach the eyeglasses to the bandage using a…
Keeps bandaids (bandages) sorted making it easy to find the correct size. Print and stack as many as you need. Each one holds three sections of bandaids. Stack one on the other and then snap the lid on the very top. NOTE: recommend glue…
My local church community collects and winds deprecated bandages from a bandage manufacturer (compromised quality but still valuable). The community members spend hours every week processing and winding these bandages to be then sent to…
This allows for organising various preprinted labels. Useful for labelling common items. Written in OpenSCAD so can generate any slot size or count. Default stl fits a Prusa MK3S+
Keep your bandages clean, organized, and easy to rewind with this compact Bandage Winder & Storage Box. This model combines a storage container and a simple rewinding system in one practical design. Perfect for elastic bandages, sports…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
used wit double sided tape. Neuu is with a thumbtack for stability.
Dispenser for 7x14 rolled gauze bandages. Fits about 12 packs of bandages inside. The dispenser is mounted on the wall with 4 screws. There are two files - one is 25 cm high and another 20 cm Диспенсер для бинтов 7x14. Внутрь помещается…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I had a group of friends I wanted to share personalised hearts with, so I created this heart. It has a hole at the top to put string through. Printing Either as two parts with supports for the bandage Or as a two-colour object split into…
Organizer for bandages that fits in ammo box that I converted to first aid kit. Walls are a little flimsy but work will when inserted into the ammo box. Supported required for drawer tabs.
A mummy for your desk. Crooked bandages wrap a pen pot at different angles and widths, and two big eyes peek out of the gap near the top. Holds pens, brushes or Halloween sweets. DETAILS • 64 mm across (68 mm with bandages), 100 mm tall,…
Diese zweiteilige Box dient zur sauberen und kompakten Aufbewahrung von Boxbandagen. Der Deckel sitzt sicher auf dem Unterteil und schützt die Bandagen vor Verheddern, Schmutz und Feuchtigkeit. Die Box ist für verschiedene Bandagenlängen…
Our doggy door recently snapped like an icicle in the cold weather. Replacement part costs money, takes five days to arrive. I've got a 3d printer and a roll of TPU I'll never expend... Tips: TPU is a must Leave just enough infill to…
Imprimer en vase spirale sans couche solide dessus et sans couche solide dessous. Imprimé en PLA : bonne durabilité. Monter simplement en serre sur les pneus d'origine, si le montage est difficile utiliser du produit vaisselle.
Bandages pour roues de Valise de cabine Tekmi ; un dessin sur Fusion 360 Comptez 4x2 bandages => 8 pièces
A sculpted mummy storage box with wrapped bandages, hands and feet, topped by a removable face-shaped head lid. Four compartments separate wrapped sweets or small accessories. Dimensions and storage layout can also be adjusted on the…
This is a 3D printed lever to make an emergency bandage (similar to the so-called "israeli bandage"), which we call an "emergency compression lever" See our git page…
This free 3D-printable Mummy Bust is perfect for Halloween decorations, horror enthusiasts, or anyone who loves Egyptian mythology. The bust showcases intricate bandage wraps and subtle details that bring an ancient, cursed mummy to life.…
It's a complete overhaul of a similar one I found. I added a handle, edited the crank to be more comfortable to insert the bandage and added a new clamp and hinge to tighten the bandage. Hinge is made of a single piece of filament, if…
I had a group of friends I wanted to share personalised hearts with, so I created this heart. It has a hole at the top to put string through. Printing Either as two parts with supports for the bandage Or as a two-colour object split into…
Our doggy door recently snapped like an icicle in the cold weather. Replacement part costs money, takes five days to arrive. I've got a 3d printer and a roll of TPU I'll never expend... Tips: TPU is a must Leave just enough infill to…
Organizer for bandages that fits in ammo box that I converted to first aid kit. Walls are a little flimsy but work will when inserted into the ammo box. Supported required for drawer tabs.
Famous Art - Self-Portrait with Bandaged Ear - Vincent Van Gogh - 1889 3D printable model.
