1 / 2
Doggy Door Bandage Repair — image 1
1 / 2

Doggy Door Bandage Repair

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

When the weather is -20f outside and your dog still needs to go...

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

Our doggy door recently snapped like an icicle in the cold weather. Replacement part costs money, takes five days to arrive. I've got a 3d printer and a roll of TPU I'll never expend...

Tips:

  • TPU is a must

  • Leave just enough infill to support the top layer (14% was more than enough for me. Top layers: 3)

  • Use M3 screws. (The holes are 2.95mm wide)

  • Not all screws are needed but it does help air seal

Installation

  • Hold in place

  • Mark two holes with a sharpie

  • Drill (careful, door is likely brittle)

  • Place two bolts through the assembly to keep it in place

  • Drill the rest of the holes with the "bandage" in place

Tags