1 / 2
Doggy Door Bandage Repair — zdjęcie 1
1 / 2

Doggy Door Bandage Repair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When the weather is -20f outside and your dog still needs to go...

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

Our doggy door recently snapped like an icicle in the cold weather. Replacement part costs money, takes five days to arrive. I've got a 3d printer and a roll of TPU I'll never expend...

Tips:

  • TPU is a must

  • Leave just enough infill to support the top layer (14% was more than enough for me. Top layers: 3)

  • Use M3 screws. (The holes are 2.95mm wide)

  • Not all screws are needed but it does help air seal

Installation

  • Hold in place

  • Mark two holes with a sharpie

  • Drill (careful, door is likely brittle)

  • Place two bolts through the assembly to keep it in place

  • Drill the rest of the holes with the "bandage" in place

Tagi