1 / 2
Classy bandage box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: detail_0.1mm_PLA_MINI_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 13.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stop frantically looking for a bandage when you need it. Just refill this neat box and place it in plain sight!
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 44
- Makes
- 1
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Print tips
There are two methods for printing the lid.
- Print in one go using file “lid_w_detail”.
This requires supports that can be a little tricky to remove. The supported area is hidden when the box is closed so no loss of class whatsoever :) In order to get the two color effect you need to introduce a color change when the bandage detail starts to appear.
- Print the lid and the bandage separately.
If you decide to go this way then you should print the file “lid_socket” on the bed as shown in the picture below and with “for support enforcers only” supports activated.
Now use the "smart fill" feature of the paint-on supports to select only the bandage detail area:
This will make sure that a thin layer of supports is created only in the socketed area. This will stay on the print bed when removing the piece.
Finally, print the bandage detail separately and glue it in the lid socket.