83 models
Mechanical Counter that auto increments 10s. Notes: Requires two M2x12 and one M2x8 bolt to assemble The planet gear has a sacrificial raft that you will need to cut away. When assembling the side with 8 teeth goes down and the side with…
A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…
3D-printable molds for silicone casting. Wound packing task trainers are simple educational models that can be used to teach/learn wound packing procedures to stop bleeding. Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament…
A single Skådis compatible peg which is sized to neatly hold 1km embroidery thread spools. This is a snug fit to the board. Inspired by @ftoerrin the design was sketched as a 2d SVG (file included) then I used a custom python script to…
This is a remix of the Wound-Tracker made by WalkingDED. I really liked his idea but I did not like the big cap on top. Top and bottom will be hold together with a pin and the top is made a little thinner. I printed the pins in red, to…
Warhammer 40.000 - Warhammer Age of Sigmar wound marker This is a easy to print Warhammer wound marker for Warhammer table top gameing, like Warhammer 40.000 and Warhammer Age of Sigmar there are two STL Models for 3 dices and for one…
Tired of always going back to the same page? Here's a simple gadget for having the "To Wound" chart on hand. Numbers are clearly visible, so you can just use it without painting it. Includes also the STEP file, just in case you want to…
- Friction fit top and bottom (results may vary), height 5mm. - Dial have slight friction resistance but spins (results may vary), width 30mm. - Dial span from 1-10 on one side, and 11-20 on the other. - 10 and 11 are opposite from each…
Two files uploaded, one for printers with multi material capabilities and the other for those without. The one without has the numbers extruded cut.
These stl files are for the game Cthulhu: Death May Die and it's expansions/seasons. I created this wound holder and counters to put on non-investigators (ie Cultists, Monsters and Elder-Ones). If the Cultist, Monster or Elder-One get a…
Replacement fan knob for Intermatic SW60MWK 60-Minute Spring Wound Timer, White
These are very simple spool tags. They have only two jobs: Stop the filament tangling while in storage Make it easy to see the filament type Vacuum bag safe There are tags for most filaments, with GF, CF, etc. While the letters do NOT…
Description: A no-frills wound marker for the game Heroscape. Based off measurements of the original Heroscape wound marker. Slightly modified internal geometry to optimize for FDM 3D printing vs the original injection molded part. Same…
This is a tiny clip designed to help in winding an air core choke balun (a few loops of coaxial cable which reduce common mode currents). See here for more information on this. The clip is symmetrical (print twice to get a pair). Put…
A Kill Team wound / damage token to replace the cardboard cutout tokens in the new 2024 starter set. I printed in 2 different colour combos to denote single wounds and 5 wounds each.
Small wound markers to keep track of a models remaining wounds. Have room for 2 12mm dice (I use Chessex, due to variations in size, the holes are 12.5mm), but can of course be scaled to need. I printed these with 0.1 layers, 3…
Matches the scale and proportions of Citadel miniature range. Prints OK on a regular FMD printer.
I previously uploaded OpenSCAD files for making a do-it-yourself air wound coil (inductor) using a 3D printed form with a taper to allow the finished coil to easily slide off the form. That's still probably the simplest and most effective…
This model is a 3D printable Diabetic Foot Training Model (DFTM) developed for training, prototyping and engineering use in a medical context. The model includes multiple pseudo-clinical wound features inspired by typical diabetic wound…
Positive wound molds used to create wound packing trainers. Originally posted by Echo - Six. Two sizes of mold provided (small and medium) - feel free to scale up or down in the slicer for additional customization. Medium is 15% bigger…
guy from apex, posed with mixamo and blender printed with default settings and organic supports file is a little broken, please share if you fix it
Funny little project featuring trays for up to seven 12 mm dice.
- Friction fit top and bottom (results may vary), height 5mm. - Dial have slight friction resistance but spins (results may vary), width 30mm. - Much larger numbers than 1-20 version. - Dial span from 1-6 on one side, and 7-12 on the…
Some small Wound-Tracker for 12mm or 16mm Dice. One, two or four Dice possible
I saw this idea on a YouTube video for The Silver Bayonet game by "Weight of Fire". Looked neater than having dice beside the model. I wanted similar size to the existing fatigue counter. Thanks MonkeySloth and to Tinkercad's…
Here is a small wounded token for games like Kill Team. It can also be used as a plus sign marker. The token is 10mm by 2mm I have included the file as an .stl and a .3mf
Two-part box for storing small and medium-sized plasters. zweiteilige Box zur Aufbewahrung von kleinen und mittleren Pflastern.
Bobbin Storage Box This elegant storage box offers space for up to 27 bobbins and is an essential accessory for any sewing enthusiast. The lid of the box is adorned with a beautiful bobbin pattern, making it both functional and…
The buttons included in Mantis Falls to count wounds and Last Gasps are awful. Just awful. So tiny I lost half of them on day one… Impossible to pick up. Here are upgrades that preserve the spirit of the game. The red hearts are used to…
This is my very first upload so be gentle. UPDATE! We've found that this tremendously reduces itching from mosquito bites. If you feel like itching the bite, just pull this out of your pocket and press it into your skin around the bite.…
A smaller wound tracker widget for those tight spots
I put this together to help record wounds on minis whilst playing Kill Team, rather than trying to use multiple dice, or D20s, etc. Printed in PLA, using a 0.25mm nozzle (0.4 should be OK using the 'no words' variety). No supports…
I designed a thread stand to be used with thread cones and cross-wound thread spools (for sewing machines that don’t have horizontal spool pins). To make the stand a bit more substantial, the base can be filled with something heavy, like…
I needed a woundcounter that goes with the model when it moves. Place it under the rim of your stand an push it around the tabletop. If you need other sizes. Please just let me know. v2 is modified for my Movement Trays. I have included…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
Simple multi-color wound token print (I manually switch filament on layer) for a miniature war game wound token. One side shows 1 symbol, the other side shows 3 symbols.
This is a reminder post to put on the playing field when the Bard / Soothsinger / "Music Note" character in the boardgame Gloomhaven is playing the Wound song. Inspiration for making this post comes from Rohirrim's "Gloomhaven - Bard…
A Simple wound counting 100mm base.
So I needed some nice wound tokens for some solo skirmish games I've been playing… Space Station Zero, Five leagues from the Boarderlands and Zona Alfa. I had some glass beads but instead of getting friends I got a 3D printer… As I still…
Wound token replacement for Gamelyn Tiny Epic Zombies. Disclaimer: Please share a Like and Follow Me! If you remix my model please include the following in description: Author: Mr.Jib Link to author: https://www.printables.com/@Jib_88963…
A guide to hold 1 or 2 12mm dice together with your wargaming miniatures!
This is a solid oval base 170mm x 105mm and 4mm thick. It has an integrated wound counter which takes 12mm dice. It's a really simple mash up between two models. I'm really sorry but I can't find the original base model like so if anyone…
A way to track wounds for games like Trench Crusade or Warhammer 40k Kill Team.
I created these 40mm wide Tokens for the Traveller RPG game to help players keep track of their modifier penalty due to damage to their character. The tokens are double sided ; -1 on one side and -3 on the other side. The tokens are made…
Keep track of damage with ease using these 3D printable wound tokens . Each token is clearly marked with a number (1, 3, 5, and 10), making them perfect for tracking wounds, hit points, or damage across a wide range of tabletop games and…
I made two versions of this one, one that's the same as on the cape and one that isn't missing the bottom left corner point because I like symmetry.
minimal box for net and wound markers for Neuroshima Hex. Fits 10 of each The net and bullet are glued using regular cyanoacrylate glue. (e.g. Kropelka) Uses 6 magnets 3x2 mm, inserted with a firm push :)
Guanto di Valentina Piacquadio per la tesi di laurea triennale all'UNIMOL, realizzato in collaborazione con Giovanni Colo' e Raissa Leoci. Turned the original hand into a orthesis glove. To be used with radio controlled LEDs for skin…
This is a simple dice holder that holds a single 12mm die to a base for counting wounds. its designed with sloped sides to easily allow you to secure basing material to it. Category: Toy & Game Accessories
When using a filament box with a tube feed to the extruder, such as on the Prusa XL, a filament change leaves a long section of filament exposed, no longer protected from humidity and dust by the tube. To keep the exposed filament dry and…
Table Top Game Wound Markers
Print in the orientation I have displayed. Add tree supports for the tabs.
I designed this to track shaken status and wounds when playing the Savage Worlds rpg. The placement in the picture shows I am shaken and have two wounds, because the die is in the shaken column and level with the second wound row. When I…
To change the values, on Thingiverse select "Customize". Alternatively, open in OpenSCAD and edit the variables or go to Window - Customizer. Note: change the "Part" variable to "Bottom", "Top" or "Pin" and export each part seperately.…
Invisible Wounds You Are Not Alone This was a user request. https://iwproject.org/ Give them some support if you can. Here is a shout out to all of those who have served, Thank You.
The card game Chez Guevara by Steve Jackson requires additional items to account for “slack” and “wounds” for each player. The game recommends small coins, buttons or bottle caps. A more professional solution is to print markers and put…
It can be used in several layers, and the top layer has space for tokens. The mechanism is based on 5x2 mm magnets.
Tory zasobów do gry Nowy wspaniały świat. Do druku wymagane jest użycie podpór. Można użyć znaczników zasóbów z gry lub wydrukować samemu sześciany o boku 8 mm. Resource tracks for the game It's wounderful world . Supports are required…
This is an original design for a 2 color presence token for the Spirit Island spirit Wounded Waters Bleeding . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as…
Model is 150mm x 100mm. I hope you enjoy the model! Comments📝, likes❤, ratings🤩 encouraged!
This is an original design for a 2 color presence token for the Spirit Island spirit Wounded Waters Bleeding . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as…
This model is a 3D printable Diabetic Foot Training Model (DFTM) developed for training, prototyping and engineering use in a medical context. The model includes multiple pseudo-clinical wound features inspired by typical diabetic wound…
- Friction fit top and bottom (results may vary), height 5mm. - Dial have slight friction resistance but spins (results may vary), width 20mm. - Dial span from 1-5, backside of counter doubles as a Battle Shock marker. I've also made an…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu Gray Transmission Distance: 2.2 PLA Sunlu White Transmission Distance: 7.7 This print uses 3…
this is for a wonder wash clothes washer the inner lid had broke and i remade it with more support i epoxied a penny in the middle as the steel part that the screw will push against. I printed with PETG at 100% infill
Look at this crate, you lot - the 'Unnailed Coffin.' It’s the final bill we all gotta pay in The Sink. You’re just a spirit in a borrowed meat-suit, and those eight iron spikes? They’re the gods’ way of saying you aren't going nowhere.…
This model is a 3D printable Diabetic Foot Training Model (DFTM) developed for training, prototyping and engineering use in a medical context. The model includes multiple pseudo-clinical wound features inspired by typical diabetic wound…
These are simple 25mm bases with a holder for a die to track wounds. They can be positioned behind a unit or in a movement tray. These were made for Osprey's Dragon Rampant game. OpenSCAD source is included.
A simple model for a keychain of the logo of the metal band 200 Stab Wounds. Designed and printed for a friend, then decided it could be uploaded for others to use as well. This print utilizes a lot of sharp corners and small shapes, so a…
This is a replacement for a WoUndWo blinds cap. Print Settings Printer Brand: Creality Printer: Ender 2 Rafts: No Supports: No Filament: Das Filament PETG Category: Replacement Parts
This is a simple organizer for the wound markers in Gears of War: The Board Game. This is the first custom part that I ever modeled (~5+ years ago), so it's not the best design, but it's easy to print and has held up nicely.
Box/holder (with lid) for wounds (hp) tokens for Darkest Dungeon board game. It holds all 10, 5 and 1 wound tokens. I added magnet (10 mm x 5 mm) and washer (18 mm x 2 mm) so it closes and I can use this holder in the game box.
This is a way to easily make air wound inductors for home made antennas or other electronic gear. It uses a 3D printed coil form and 3D printed strips to hold the turns of wire in place. The model was created in OpenSCAD and is parametric…
Something small and simple to help keep track of how many wounds a model has taken.
I had the boardgame "All Wound Up!", The zombie racing game, and I made some dice to make it easy for kids, and made it to a random fun quick game for them whitout the use of cards. The Dices are one Wind-up counter and directions, make…
Wound bag brace for a medium Convatec Eakin fistula wound pouch 6.9 x 4.3. I've been living with a high output fistula since August. I don't recommend it. Basically, everything I eat or drink flows into the bag without providing much in…
Wound tokens for Marvel Crisis Protocol They are all 2mm in height, sizes are: 18mm for 1 wound 22mm for 3 wounds 25mm for 5 wounds (looking at you Hulk lovers) One sided, designed to be printed with color change at height. Check other…
This is a stab wound I use for the zombie I play in 'The Old Spanish Trail' haunt. It's a remix of an excellent knife made by ramkfam. The base is simple so I use Prosade to adhere it and latex to create the wound. Any artists out there…
Hi Q air wound coil forms. Generates a form with helical spacers to ease even winding. Designed in OpenSCAD, so you can modify for your needed dimensions and turns. Includes feet for attachment and holes for brass screws and nuts for wire…
Funny little project featuring trays for up to seven 16 mm dice.
Spiral wound 1 ½" coupler for pool vacuum hose. It can be used to join two sections of spiral wound hose. For best performance, use silicon on the coupling to ensure a good seal. In a properly calibrated printer, make sure to over-extrude…
