NIH Surgical Mask Tension Release Band - Ear Savers
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.08 – €2.55 net (excluding VAT)
For file: 9x_minimal_right_03mm_petg_mk3s_2h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.31 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.36 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the NIH approved Surgical Mask Tension Release Band.
- Rating
- 4.85 / 5
- Likes
- 222
- Downloads
- 2,259
- Makes
- 39
- Views
- 7,740
- Reviews
- 40
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Public Domain
This is the NIH approved Surgical Mask Tension Release Band. I am only posting this here to provide an easy reference to print files and gcodes for printers to be used by Prusa Groups. It was invented by someone else, and is listed on various websites.
https://3dprint.nih.gov/discover/3dpx-013410
So far we have been able to print and distribute over 1900 in the Omaha, NE metro area. I have found that a mix of small and large are needed, and I have included gcode to print in sets of 9 and 11.
Group: https://www.prusaprinters.org/group/midwest-printers-omaha-KRnPPQE
EDIT: Sorry I neglected this, I had no idea so many were downloading from here. I am in the process of adding various layouts and versions. The layouts help prevent sheet damage by allowing the printer to cycle thru various layouts instead of using the exact same spot and wearing out the PEI; especially on the smooth sheets in PLA. I also have found that most facilities prefer the 100% sized band now (for adults), and local hospitals have started to allow custom versions that save materials. I know there are a ton of variations now, but these are the models we have been distributing in the Omaha area.
UPDATE COMPLETE: Full Sheet files and gcodes have been uploaded. NIH versions scaled at 100% and 85%, as well as minimal version that is pending NIH review. It uses about 30% less filament.
Print instructions
PETG or PLA
.4mm Nozzle
.3mm Layer Height
I found that using a .6mm nozzle did not justify the loss in quality for the savings in time. Maybe a certain forum poster will stop by and provide tips on increasing speed and size without losing quality.
GCodes sliced for Prusament PLA & PETG