Search results: ear

Clearance Tolerance Test

Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities

HERRINGBONE PLANETARY GEAR

Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Author: Emmett Lalish Print instructions Print takes roughly 3 hours at 100 µm layer…

Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research

Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…

Geared Phone stand

I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not…

3D Printer Nozzle Necklace – Wearable Jewelry for Makers

I made this model because I wanted a way to show my interest in 3D printing without buying a shirt from a This is a 3D printable nozzle-style necklace designed for people who want to show their interest in 3D printing without wearing…

The Counterintuitive Gear fidget MkII

Bigger! More planets! Faster planets! Even more counterintuitive! You probably have played with some planetary gears, they are cool stuff, especially those print-in-place herringbone ones. This “Counterintuitive Gear” model however has a…

adapter for engine with gear, for dremel chuck

in case you don't have a gear, cut the STL and adapt the tip of your motor.

REMIXED Creality K1 LIBRA Extruder - Trimmed gearbox guard

This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…

Snowman Clam Shell Ornament and Gift Box - "2024" & No Year Options

This is an updated version of a previous design of mine which reflects the year change, as well as a few other minor tweaks. I have also included a set of beveled edge ornaments, to go with the original rounded edge version. You print a…

Beard comb new design

0.4 nozzle, 0.2mm layer height, 3 perimeter, 5 top, 5 bottom, 20% infill gyroid and NO brim, no arachne.

Rear mounted ThinkCenter in a 10 inch rack

Use 2 x M3 screws to mount your ThinkCentre Tiny to your 10 inch rack. The backside ports will be facing you for easy access. The 2 x 2½ drivebays are optional. Verified on models: M920q M920x M720q. I used this SATA controller in the…

Xmen - Wearable Cyclops Visor

Inspired by the amazing design done for Fortnite, I decided to turn it into something wearable. Always loved that classic Cyclops design and was surprised not much has been made for it. Model is very simple and features the main piece and…

Bear Upgrade for Prusa (i3) MK4S - xBuddy Cover - elBox-cover

Cover for elBox - Bear Upgrade Prusa (i3) MK4S

D&D Owlbears for Giant LEGO Wreath

I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so I put together these owlbears. They are kind of ridiculous but they made me laugh. Printed this with supports. Thank you @MZ4250 for the…

Sony Blue Gear Left Threading Gear S-VHS

SONY SLV 3-736-147-01 373614701 Left Threading Gear S-VHS VCR "Blue Gear" There have 2 versions, there are slight changes in dimensions, I recommend testing both variants. (I recommend resin printing) or verry good tuned FDM printer

llavero no fear

llavero no fear

Heartpicturephrame

A cool heartpicturephrame :)

Y-axis motor mount for a belt 9 mm with a support bearing, Ender 2 Pro, 3, Creality CR-10

For fast printing, I lacked rigidity. That's why I created this Y-motor mount for a belt 9 mm with a support bearing. This Y-motor mount is suitable for printers: Ender 2 Pro, Ender 3, Creality CR-10, Tevo tornado and Sovol SV01. Also,…

Journeys in Middle-Earth tokens tray

Tray to store tokens (inspiration, search, person, depletion, darkness, ...) from all expansions.

Journeys in Middle-Earth battle tokens tray

Tray to store all battle tokens from all expansions.

Journeys in Middle-Earth card trays

Trays to store all (unsleeved) cards from all expansions.

Ender 3 V2 Neo linear rail alignment bracket

Since you can't use T-nuts on an Ender 3 V2 Neo to install a lineair rail it's required to drill the X-axis profile This bracket centres the linear rail on the X-axis so it can be drilled correctly. Required tools: hand drill 3.5mm drill…

Cactus earring pendant

Simple cactus earring to use with a screw on hook.

Spherical gear joint

Testing an idea of a 3D printed spherical gear joint (look at the OpenSCAD files for further details). Backlash is an issue. Need some more work in order to be useful for a mechanical robot arm, but that's a start. Check the video to see…

Bosch Slicer Gear

Spare gear for Bosch Multi-Purpose Slicer MAS 4200. Print instructions Unassociated tags: MAS 4200 Category: Replacement Parts Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0.20 Infill: 30%…

Qidi Plus 4 Rear Cover with various fan sizes

Qidi Plus 4 Rear Cover with the choice of different fan sizes in 60mm, 80mm, 92mm, 120mm Printer settings with ASA are with my printer. Your settings may differ from these. Material ASA (Qidi) HotEnd Nozzel Temp: 270°C Bed Temp: 105°C…

Gears for Linkage Construction Kit

Add gears to the fun linkage construction kit. These are designed to be places horizontally and vertically adjacent although they may work in other ways. The tolerance is loose so should be easy to print.…

Chicago Bears logo

For all you Chicago Bears fans. Category: 3D Printing

LED Cat ear Headband

The Case and Lid inlay combo is capable of holding a very small WS2812 LED Strip. The Other inlay can hold a 5mm RGB LED. 15% Infill minimal Was used in this Workshop:…

Ball Bearing Axle for PolyDryer Remixed

When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…

Bearing - Print in place

A simple yet working 3D printed bearing, works just fine and can be used for any purpose. Printed with 0.4 mm nozzle. Printing & post-processing Print in highest possible resolution. Minimalize the stringing. Use any lubricant to…

Eibos Cyclops Bearing Riser

20mm bearing riser for Eibos Cyclopes dryer. Works w/wo my wall riser. 3mf included Fast to print and it's doing it's job For better airflow

Potara Earrings Dragon Ball Objects #2

—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…

Ghost With Heart Ghost Figurine Halloween

Cute little ghost holding a heart ❤ You can either colour it in your slicer or paint it with acrylic colours or makers Height: ca. 80 mm Layer High: 0,2 mm Supports: Yes Filament: PLA or PETG Scalable: Yes

Lotus Elise rear transom grille

This scan was collected with a Creality CR Scan 01, so the result is a bit rough. It sufficiently captures the geometry to allow re-creation in CAD. I have not tried to create that model - the geometry has multiple sweeping arcs that…

Winged Spear

Spearhead made for use in medieval/renaissance combat. These spears were designed for use in the SCA cut and thrust polearm experiment (approved for use as of July 2024). Print with TPU (ALL PARTS) for them to be flexible. Print the…

Film Developing Tank Connection Bearing

I designed and made a connection bearing for rolling wash of a developing tank. This connection bearing connects the developing tank and the motor, making it convenient to wash the film. The connection between the developing tank and the…

Cross Gears Test Print

All parts print on all standard 3d printers, requires no additional tools for assembly, and assembles in seconds (snap the parts together and you're ready to go!) Add a little WD-40 to the gears for smoother motion. Recommended print…

Dear_Flex_Keychain

I wanted to make a flex joint model, hope you like it . Included a small hole for a keychain. Printed in Red PLA. Size: 100x115x80 No support.

Gearbox with a 1:6.75 gear ratio

Assembly: Put the gears onto the shafts and close it with bases from both sides, print Shaft x2, Base x2, Gear 15 x1, Gear 100 x1, recommeneded settings: layer height 0.2mm, 100% infill for gears, 25% infill for base, 100% infill for…

Kenmore 158 Sewing Machine Hook Drive Gear

Replacement gear for a Kenmore 158 series Hook Drive Gear. Traditionally made with nylon they can crack over time. My sew machine is model 158.18800. Make sure the mark the orientation of the needle and the bobbin holder. I had to…

Fallout Nuclear Waste prop

I printed it in PLA with 20% infill. I even made a lid with can hold a 12mm switch.

Sony HT-S40R pivoting ceiling rear speaker holders

This is a remix of the following 3 projects that all contributed to creating what I needed: https://www.printables.com/model/427857-samsung-home-theater-ceiling-mount : this gave me the wall support part + the sliding insertion mechanism,…

Rack ear for Netgear GS316 for mounting in 19" rack

Holder to mount NetGear GS316 Switch in 19" rack. Print 2, one for each side. For ekstra security, add a large zip tie to hold the ears to the switch while mounting it to the rack, once it's mounted it should hold it self. print with the…

Heart Picture Frame 6-4

Picture frame, 6in by 4in.

Urbi Rotating 0.2 Bowden Rear PTFE Entry (Properly split up)

Rotating URBI thing, but now, properly split up

Rear ladder for TRX-4M Defender

Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg

Zelda Heart Container Keyring

Heart Piece from Legend of Zelda games Designed as one full piece but there are other versions with the heart and outer piece split for multicolour printing or a flat back to print flat on the print bed Heart Piece:…

Heart note holder Kit - Herz Notizhalter

Looking for a heartwarming way to display your notes or pictures on your desk? The Heart Note Holder as a ClipKit is just what you need! 💖This decorative heart-shaped clip isn't just functional but also adds a touch of style to your desk.…

Pip-Boy 3000 Mark 4 – Wearable

Thank you to ReProps for sharing the original files so I could make a remix that I could wear! Everything is fully printed. Install the hinge pin in the hinge before gluing into the pip-boy halves. I didn't come up with any clever way to…

Modular Helical Gear Fidget

Inspired by a comment from @deadCXAP_2453033 on my previous helical fidget. Convertible into a “fidget king” (ring?) or a fidget snake! In addition to simply spinning the gears, this fidget can perform other unique tricks with certain…

Math Learning Tiles

Math game for my younger brother.

Gear and AR556 magazine pouches with and without belt clip.

Fits common P-Mag AR / 5.56 / .223 magazines and who knows what else. These can attach to a belt, screw to a wall or cabinet, belt attachments, paddles and misc. My modern P-mag's fit “just right” and the last 5mm insert locks them in. My…

Camera lens rear caps

Camera lens rear caps for M42x1, M39x1, Pentax K, Sony E, Nikon F mounts. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** No Supports: No **Resolution:** 0.15mm & 0.4mm nozzle Infill: 100% **Filament:** FDplast ABS…

HeyGears Reflex RS Print Bed Holder Drip Caddy

This is here only for legacy reasons. Please use the updated design: https://www.printables.com/model/1109161-heygears-reflex-rs-print-bed-holder-drip-caddy A smal holder for having the print bed in an angle for the resin to run off your…

Lego Compatible (3320.dat) Minifig Headgear Mask Batman Cowl with Molded Eyes Pattern

This model is compatible with the lego system.

When in doubt, eat bread. - Easy 10 minute, filament swap - Bread Basket Jewelry Set - Croissant earrings and Baguette necklace

When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…

3D PRINTER 3D PRINTED WITH PET RECYCLED FILAMENT ( BEARING SLIDES )

Print in place gear fidget

Gear fidget model with double helix gears and gear rack. I finally learned how to make a gear rack myself according to videos and tutorials. Since I really like gears and their movement, I will try to invent other similar toys. The…

Housing for linear bearing

Print two the same parts and assembly with the bearing and 4xM4 nuts Material PET-G layer: 0,25mm

Heart with Smiley

A heart with with star eyes and mouth

Element Enduro Ecto rear bed exhaust stacks

In the attempt for a more realistic look I have made these exhaust stacks to give the appearance of them coming up through the truck back

Christmas heart LED

making a series of christmas deco If you have proposals for addon or other please leave a comment and if you like my work please leave a like :-)

Funnel for HeyGears Resin Bottles

A small funnel that screws onto HeyGears resin bottles. It's designed to push down the spring-loaded stopper inside the bottle to allow resin to be poured into the bottle freely without needing to keep any pressure on it. The funnel is…

Human Heart Succulent, Cactus, Small Plant Pot

Found this model of a human heart and wanted to make it into a planter for succulents/small house plants!

Santa beard for Lego hitch ball cover

I love this Lego hitch ball cover (https://www.printables.com/model/263115-lego) so I make some accesories. It has to be glued on the Lego head! It should be printed with fuzzy skin, outside only.

Rinny The Bear

Sculpted for someone on Reddit.

Rear Panel Keystone Port for the rc2014

Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…

Rear Panel Port Blank for the rc2014

A simple panel plank for the rc2014 Rear Panel Kit written in OpenSCAD. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Full source code on Github:…

Axial Early Bronco 1/10 Floor Mats

Axial Early Bronco Floor Mats Print in 0.4mm or 0.2mm

Axial Early Bronco 1/10 Fuel Cap

Axial Early Bronco 1/10 Fuel Cap Print 0.4mm or 0.2mm with supports!

Inverted Spear of Heaven

Toji's main weapon when facing off opponents.

Little Ghost Earring Remix

Just a great model remixed to be worn!

Sprinkler Extraction and Clearing Tools

My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…

Rear bike light mount for Old Man Mountain racks

The Old Man Mountain bicycle racks have holes for presumably mounting lights; they are each ¼" in diameter, set 1" apart (center to center). This mount has a nubbin that protrudes down into one of the holes, then relies on a ¼" bolt to…

1mm Spacer/shim to raise MGN12 Linear rail

I needed to lift up my linear rail slightly to use the NeedItMakeIt Y-axis Linear rails, so I designed this. It would be suitable for anyone who ever needs a shim for a MGN12 linear rail, for any purpose

2mm spear warband (barbarian/horde)

I was on such a roll with the pale flesh paint that i forgot I'm playing fantasy, not historical. These guys are supposed to be green. Oh well, I considered putting some blue highlights on for woad paint but that's too much effort for a…

LM6UU Linear Bearing holder

Holder for 6mm rod linear bearing (LM6UU)

LM8UU bearing holder

bearing holder for 8mm linear bearing (LM8UU)

Case: CO2 Ampel for ESPHome by LinkGear

Testprinted in ASA, should work with pretty much all other materials. If you have multi material capabilities available, see the screenshot on which region to print in white (or translucent) to let the LED shine though.

Winne the Pooh wearing a Santa hat cookie cutter

Print setting - I prefer to use 100% infill to give model strength, 0.16 layer height, 4 walls

Gears without movable bearings.

The bearings were constantly pulling off my print bed, and failing my print. I modified the gears and fused the bearings to the outer ring. The gears still spin with just the inner ring being unconnected.

Odznak česká vlajka (30 years of freedom)

Odznáček s českou vlajkou na zavírací špendlík. Délka 35mm. Pro tisk i bez MMU2. Potřeba zavírací špendlík cca 20mm dlouhý. Print instructions Tři stl soubory slouží k tisku tiskárnou s multimateriál upgradem. Pokud si budete generovat…

Avocado Earrings

Wear these fun guys around to show your love of avocados!

Volvo XC90 Folding Seat Latch Release Handle (Rear, 39826799; 39826801)

Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…

fidget gear ring with turn tool

Since some people noted that it can be difficult to break free some of my gear rings and that the one with inside knurling can be uncomfortably rough (matter of taste), I made another variant with a smooth inside, but with two grooves for…

Spool Adapter with Integrated Bearing

IMPORTANT : cut the model so its height is about 2/3 the width of the spool: Print recommendations: 0.2 layer height, 0.4 layer width random seam position or scarf seam concentric top infill

2025 New Year Headband

A remix of a headband by Ivan for the new year 2025! The numbers are seperated and raised from the headband so you can paint them easily in your multi filament printer! It needs only 11g of filament and prints laying down without supports…

Grinch Bear

Here is the model for Grinch Bear. The Grinch is a reluctant acquaintance of Barry, and he seems to be willing to tolerate you too, do you have space the Grinch? just keep an eye on your Roast Beast. I hope you enjoy, and Merry Christmas…

Linear Rail Guide Adapter For Quick Swap Kit - Snapmaker 2.0 A350

I was looking for a solution to use the linear rails SBR16 with the quick swap kit and it was also necessary that we can quickly remove the adapters.

Christmas Teddy Bear 3 with Snowman - Stencil

Stencil template - Teddy Bear with Snowman. 170x170x0,4 mm - it is possible to change the size, ideally maintain a height of 0.3-0.6 mm 1x STL, 1x 3MF for Kobra 3 printer and Anycubic Next Slicer, 1x 3MF for Bambu Lab A1 mini (and other…

Christmas Teddy Bear 4 with Sack - Stencil

Stencil template - Teddy Bear with Sack. 170x170x0,4 mm - it is possible to change the size, ideally maintain a height of 0.3-0.6 mm 1x STL, 1x 3MF for Kobra 3 printer and Anycubic Next Slicer, 1x 3MF for Bambu Lab A1 mini (and other…

Christmas heart

We have had a long tradition of making Christmas hearts of glossy paper with trained fingers and a scissor. Here is a 3D printable version. Well a 3D model with only ONE layer. Instructions: There are two set of files, Red and White (you…

Rear Z Stepper Mount For Original Ender 3 - Joushou's Triple Z Mod

Designed to fit the original Ender 3 to EN3G v1.2 conv with Joushou's triple Z.

Glowing Earrings

Printed in white/translucent TPU. A CR2032 is the power source. A standard 5mm LED is press/glued into the pearl. One contact is formed into a hook. Need to bend led pins to ensure contact and mobility.

Rear LCD Cover for Non-Protruding XL Display Mount

cover the rear of the LCD after relocating to the top of the extrusion Print in place no supports No hardware required snaps in place.

Ausdrückwerkzeug für LM8U Linearlager

Werkzeug zum Ausschieben von LM8U und UU Lagern aus dem Halter. Category: 3D Printing

Christmas heart

A Christmas heart inspired by a one made of paper but made as a 3d printable object. Can be modified in OpenSCAD. There are 4 different types Original: With a stem with a hole in for hanging. Tree clip if you want to hang it on a tree.…

Gnom 2026 Happy New Year

New Year's gnome 2026 to stand and hang! I used the standard PrusaSlicer parameters for PLA. Slow printing improves the print quality! Print: Nozzle: 0.4mm Layer height: 0.2 Infill: 100% I used PLA for printing, PETG is also good.…

Christmas Tree Earring

Remixed to scale to 130% and redesigned ornaments to be larger for multi-color effect.