1 / 6
CMMG 22LR Anti Bounce Weight and Sear Trip — image 1
1 / 6

CMMG 22LR Anti Bounce Weight and Sear Trip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.56 – €0.69 net (excluding VAT)

For file: Sear Trip_0.15mm_ASA_MK3S_42m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.63 excluding VAT (range midpoint).

Weight reported by the author
3 g
Print time reported by the author
42 min
Source material
ASA
Estimate material
ASA
Estimate printer
Bambu Lab X1 Carbon - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Reliability parts for CMMG 22LR conversion

Rating
5 / 5
Likes
132
Downloads
2,476
Makes
2
Views
8,583
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Anti Bounce Weight

Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact.

A separate Locking Pad is fixed in place with a piece of filament and soldering iron, can be rotated or replaced when worn out or milled from more durable material.

There are two versions: 

  • ABW Solid is intended for printing with no infill, later to be filled with metal powder;
  • ABW Slots has two ⌀5 mm and one ⌀3 mm slots intended for inserting metal rods, max length 45 mm each.
     

Sear Trip 

The cutout is in the same spot as in the original BCG. The bottom is flat to better work with sliding sears. Lugs in the middle force it to reset during bolt travel.

Check out my other things for 22LR and happy printing!

 

Tags