P
PrintablesDennis
22lr tray clamp
50 rounds helper tray with sides Easy to move when shooting Lifts rounds from package tray for easy pickup.
- Downloads
- 32
- Likes
- 4
- Rating
- 0
Search results: 22lr
Counting matching models…
P
Printables
22lr tray clamp
50 rounds helper tray with sides Easy to move when shooting Lifts rounds from package tray for easy pickup.
P
Printables
Buttplate for Stevens marksman 22LR rifle
Purpose designed part, may not fit your rifle exactly as the Stevens marksman rifles were built in the 1930's and the wood stocks may not all be the same. i.e. mounting hole locations, profile, curvature, etc. Original crumbled and was…
P
Printables
22LR ammo Storage Bin
I made the container support double layer trays for the 22LR by stretching the bin height. I reduced the filament usage in the trays by reducing the thickness of the ammo slots in the trays. The trays in the box are a little tight fit so…
P
Printables
Ruger Mark 22LR Pistol Magazine Pouch
These were designed specifically for the Mark IV 22/45 mags. They may fit other mags unchanged, or with some scaling, or with small mods. Fusion 360 file included. Mags fit bullets inward or out. Optional magnet to temporarily join…
P
Printables
Lid for 50Cal Ammo Can / Box 22LR bulk storage boxes
Remix of Lid for 50Cal Ammo Can / Box 22LR bulk storage boxes
P
Printables
22lr Stripper Clips
Don't wanna carry a whole box of ammo, just enough for a reload or two... Only have one magazine, don't wanna pay the $20 - $50 pricetag for another... These little clips can solve these problems. Toss a couple of these lil guys in your…
P
Printables
Federal and Federal Auto-Match Lids for my 22LR Bullet Holders
Since I made my 22LR Bullet Holder I have made a bunch of lids with different logos on them, and I was asked to make one for Federal Auto-Match ammo, so I made three. For the "Auto-Match" and "Federal Auto-Match" lids, color changes are:…
P
Printables
Different Safety flags .177 + .22lr / Sicherheitsfahne 4,5mm + .22lfB
Safety flag in three variants Two for .22 and one for .177 / 4.5 mm. "Bechriftungsfahne_FP" and "Stopfen_FP" belong together. The labeling on "Bechriftungsfahne_FP" should be made more visible by a color change. You can still make out the…
P
Printables
Beretta Bobcat 20x 22LR Magazine Loader
A tool to ease the loading of Beretta Bobcat 20X .22LR magazines. It comes in two variants, one with wings and one without. The wings variant allows for easier unloading and improved one-handed operation. The no wings variant is more…
P
Printables
Revised of 22LR Ammo Tray
The bullet tray has been redesigned for easier printing and to use less plastic.
P
Printables
22lr tray
50 rounds helper tray with sides Easy to move when shooting Lifts rounds from package tray for easy pickup.
P
Printables
Sig Sauer P229 22LR Slide Storage Case
I made this storage box to transport my P229 22lr slide to the range. Then I figured maybe someone wants to store a standard P229 slide so I made a shorter box as well. I printed it in PLA, standing straight up with supports (for the…
P
Printables
CMMG AR15 .22LR AR22 Buffer spring spacer
I made this spacer for CMMG .22LR conversion kits. It's installed in place of the stock AR15 buffer weight, and uses the stock AR15 buffer spring to apply pressure on the back plate of the CMMG BCG so that it has no movement when the bolt…
P
Printables
CMMG 22LR Anti Bounce Weight and Sear Trip
Anti Bounce Weight Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact. A separate Locking Pad is fixed in place…
P
Printables
Reinforced Feed Lips for CMMG 22LR Magazine
Following the idea of reinforcing quickly wearing feed lips in my hunting rifle , I decided to do the same thing for my 3d printed magazines for CMMG 22LR conversion kit for AR-15 . This not only allowed to greatly increase lifespan of…
P
Printables
NOT WORKING!!! CMMG AR-15 22LR Double Stack Magazine
Feeding is spotty at best, don't print it and expect to have a functional mag. After years of tinkering and starting many times from scratch, I've decided to post it, maybe someone will find a solution to my problem. The goal was to make…
P
Printables
Easy grab, Cal 22lr (.22) Storage Box (50 cartridges), with alternated height
This is a storage box, to store 50 22LR cartridges. The box is a very simplistic design, but it incorporates a smart layer, that will elevate every alternate row of cartridges such that it becomes easier to pick the cartridges from the…
P
Printables
Remix of Caliberator 22LR
It is a box capable of holding up to 50 cartridges in caliber .22 Long Rifle (5.6×15mmR). The box is compatible to the slide that ships with certain CCI-brand ammunition. This may spare you the task of having to print the slide. On the…
P
Printables
Speed Loader for Browning Buckmark .22LR
The Ruger Mark III & IV and Browning Buckmark magazines are nearly identical except for the magazine retainer cutout location. The Buckmark's cutout is on the opposite side and 19mm further down the magazine. Pictures compare the Browning…
P
Printables
Buttplate for Stevens marksman 22LR rifle
Purpose designed part, may not fit your rifle exactly as the Stevens marksman rifles were built in the 1930's and the wood stocks may not all be the same. i.e. mounting hole locations, profile, curvature, etc. Original crumbled and was…
P
Printables
Ammo Box for CCI .22LR
You can put the CCI tray in the box without having to handle single rounds. Box can be partially opened to prvent dumping all the ammo at once. I also have a version for Federal Ammo.
P
Printables
Ammo Box for Federal .22LR
You can put the Federal tray in the box without having to handle single rounds. Box can be partially opened to prvent dumping all the ammo at once. I also have a version for CCI Ammo.
P
Printables
50 round .22LR brick
Had some old 50 round boxes that were falling apart so I made my own simple 50 round box. Includes both lid and sleeve, or just use the base to replace the inner cardboard tray of factory 50 round boxes.
P
Printables
22LR Smallbore Bullseye Ammo Block
22LR Ammo Block. This is used for Smallbore Bullseye Rifle shooting. Holds 2 targets of ammo plus sighter shots. There are 2 versions of the block. One has the targets numbered and one does not. Printing Material - PLA Build plate -…
P
Printables
Print in Place Rugged Case for .22LR Ammo
This Print in Place Rugged case is customized to store 78 rounds of .22LR munition. The Insert is printed upright as is. The Case is printed with normal support for the lock. Use any filament except PLA for heat resistance and real…
P
Printables
beretta 71 magazin zásobník 22lr
beretta 71 magazin zásobník 22lr potřeba samozřejmě dodat pružinu
P
Printables
22lr bullet holder
This is a 22LR bullet holder that can be mounted anywhere you can find space. There are 2 versions. One with screw holes and one without. They can be mounted with screws, double sided tape, Velcro, M-LOK rail (with the right hardware), or…
P
Printables
Picatinny rail Henry H001 22lr
Picatinny rail Henry H001 22lr. Mounts underneath to enable mounting of accessories like tactical lights. NOTE: Stand on end, with support when printing.
P
Printables
Beretta NEOS 22LR Front Sights Three Types
I wanted to make a fiber optic front sight for my Beretta Neos. The downloadable file contains 3 different sights. One is a direct replacement for the stock sight, one has a “painted in” triangle in place of the "painted in" round dot,…
P
Printables
Ammunition tripod holder for .22lr + pellet
I made the holder to allow placing air rifle pallets and .22lr trays on tripods that are designed to be placed with match boxes. The placement for .22lr ammunition also elevates the ammunition for easier retrieval.
P
Printables
22WMR parts for 22LR Ammunition case by OvertonPrints
Taller box and lid for more longer cartridges. Green in the render indicates the new files from here, the grey parts are original and should be grabbed from the OG page. UPDATE 4/10: Corrected dimensions off a physical .22WMR case instead…
P
Printables
GSG 16 22LR Speed Loader
This is a speed loader for the AtI GSG 16 22LR, simply put it on the mag (lanyard hole to the back) press down insert a round and repeat until the magazine is full. I couldn't find a speed loader for my ATI GSG 16 22LR so i decided to…
P
Printables
.22lr dummy round
I wanted something fun to use as dummy rounds in my .22lr. I know, you shouldn't use a real casing just to not get used to seeing brass in the mag when not loaded. But I do print these in bright orange so… Anyways, I like the weight and…
P
Printables
Chamber flag for Anschutz 64 .22lr
Got myself an Annie, and wanted a nice chamber flag. Got something cheap online, it didn't fit. Figured I could design something that worked nice. Wanted something that I could: put a tag on mount on my picatinny rail to keep things tidy…
P
Printables
Hämmerli X-Esse Safety Flag .22lr
Replacement for the original safety flag. The slide must be almost closed before the pistol can be dry-fired. Also there is a open space so the ejector won't grab the safety flag's rim. The STL includes a bit of built-in support which…
P
Printables
22lr ammo holder M-lok
Mounting for 22LR in several variations (for free): - V1 for 5 rounds (not recommended for precision shooting) - V1 for 10 rounds (not recommended for precision shooting) - V2 for 5 rounds of ammunition - V2 for 10 rounds of ammunition…
P
Printables
22LR Rim Thickness Guage
Measure the rim thickness of .22LR, .22Short, .22Long, or .17mach2 so you can sort your cartridges for consistency. M3 x 4mm Heat Insert M3 x 10mm bolt (knurled head) Printed in PETG on P1S .16mm layer, 15% infill
P
Printables
350x22lr Mehari's cigars battle box
A tray for 350 un. of 22lr that you can put in a cigars box.
P
Printables
PMAG Style 10 Round 22lr Mag
Remix of 30 Rnd 22LR CMMG AR Style Mag. Just wanted a shorter mag as the full mag sticks out a lot and I wanted a less intrusive mag I did change the Follower (Hold Open) as the original one did not work for me
P
Printables
Rugged Box for CMMG 22LR Conversion Kit - STANAG Mags
Rugged parametric box for the CMMG 22LR conversion bolt with 3x old style STANAG mags (see pics). Uses 30mm screws for the hinge. For anyone wanting to add to their own box with different settings, an insert file as STEP is provided. You…
P
Printables
22lr Service Pistol ammo holder (6 rounds per row)
22lr Service Pistol ammo holder (6 rounds per row) 20% infill, .15mm
P
Printables
Keystone State Arms Crickett 22lr bipod pic-rail/mount
Keystone Sporting Arms Crickett bipod mount. I removed the sling adaptor, and added some screws and nuts I had. Its very solid, no flex, very durable. Could be used for flashlights, grip, whatever. Printed with PETG CF, 25% infill, 4 walls.
P
Printables
CZ Shadow 2 .22LR Kadet (non-threaded barrel) Storage Box
Storage Box for a Shadow 2 .22LR Kadet Kit. No supports needed. Uses 4x4mm circular magnets to secure the lid. Will accomodate for a Kadet kit slide with a non-threaded barrel.
P
Printables
100 Round 22LR Ammo Box With Lid - Remix
Here is a neat little ammo box for your 22LR ammo. I remixed it from MrBill1234's model. I felt that 50 rounds wasn't enough, so I changed it to 100 rounds. I also adjusted some tolerances and made a piece to replace the original CCI…
P
Printables
STG44 .22LR Magazine Clip Holder Bracket
So I am working on a speed loader for my stg44 in .22lr and I made this little bracket thing to help hold the speed loader in place, I feel like this could be useful to anyone else who happens to have a 3d printer and the reproduction…
P
Printables
STG44 repo .22LR Magazine locking mechanism pin
This is another piece I modeled for my .22lr speed loader, I am publishing it so anyone else that owns the stg44 in .22lr that wants to make modifications can with less hassle! This piece fits into the locking slot of the magazine.
P
Printables
22LR Snap Cap Dummy Round Insert
22LR Snap Cap / Dummy Round insert for spent brass casings. The original file from YayBacon was pretty good, I just tapered the bottom to make pressing into the casing easier. A drop of glue could be a good idea also. 2 different…
P
Printables
22LR / 223 / 556 Folding Safety Chamber Flag
22LR / 223 / 556 Folding Safety Chamber Flag I was starting to have issues with space in my safe. My chamber safety flags sticking out sideways weren't helping the cause... I designed a safety flag that folds down flat to the side of the…
P
Printables
CZ 515 22LR - 15 round Waffle magazine (452 / 453 / 455 / 457 / 512)
CZ 515 22LR - 15 round magazine - Waffle Mag! Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus…
P
Printables
CZ 515 22LR - 15 round magazine (452 / 453 / 455 / 457 / 512)
CZ 512 22LR - 15 round magazine Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
P
Printables
CZ 515 - 22LR 10 round Magazine (452 / 453 / 455 / 457 / 512)
CZ 515 - 22LR 10 round magazine Fully DIY 10 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
P
Printables
22LR Ammo holder / small shelf
I need a small shelf to be attached in order to hold up to 3 boxes of 22LR ammo.
P
Printables
22lr holder for cigar tube
Holds 20 rounds of 22lr in Cigar Tube Metal Waterproof Cigar Holder Aluminum Air Tight Cigar Case Tube (L145_⌀20, Black) Amazon.com: ASHCUBES Cigar Tube Metal Waterproof Cigar Holder Aluminum Air Tight Cigar Case Tube (L145_⌀20, Black) :…
P
Printables
SK/Lapua Ammo Box 22LR
I really liked 22LR Bullet Holder by @SkippyMcSlappyPants and used them for CCI Standard Velocity for a few years. I wanted a similar box for SK ammo, but original design was made specifically for the flat CCI bullet holders and alike.…
P
Printables
10rd pill bottle holder for 22Mag/22Lr
I made this to make use of empty pill bottles i had around the house and i designed them to hold 22Mag/22Lr
P
Printables
Multiboard Magazine & Bolt Holder Cmmg Ar-15 22LR Conversion
This is to store two Cmmg AR-15 to .22 LR conversion bolts and six magazines. The prints are a better way to store firearm magazines on a multiboard. They allow easy installation and magazine retention. They will NOT allow forward removal…
P
Printables
Kel-Tec P17 Empty Can (Black - Red) .22LR
These are not Silencers or suppressors; they are empty cans. They are NOT ILLEGAL to print, own, or use.
P
Printables
.22LR suppressor 1/2-20 1/2-28 Brno model 2 Cz452 Cz455 Cz457
Supressor for .22 Longrifle treaded ½-20 unf and ½-28 unef. if you want looser tread try x-y 101% Printed in Petg Testshots approx 500rd Cci Standard in Brno Model 2 (cz452/455/457) without any issues, even testshot with Cci Stinger, no…
P
Printables
Box for 22LR ammunition
Krabička o rozměru: š-60mm d-95,01mm v-32,05mm Krabička pro 50 ks nábojů ráže 22LR
P
Printables
Position7 22LR magazine tools and accessories
This listing contains 3 files: Magazine tester Assembly tool 10 round limiter video on how assemble the magazine can be found here:
P
Printables
Ammo box .22LR
Ammo box .22LR Green - Polymaker PolyTerra PLA Army Dark Black - Sunlu PLA black The set can be completed with: https://www.printables.com/model/1404853-ammo-box-9mm
P
Printables
22LR Tray (Revised)
I revised the 22lr tray from @chewbugga to fit my regular 22lr rounds because the holes were too small.
P
Printables
CZ Shadow 2 .22LR Kadet Kit Storage Box
Storage Box for a Shadow 2 .22LR Kadet Kit. No supports needed. Uses 4x4mm circular magnets to secure the lid. Will accomodate for a Kadet kit slide with a threaded barrel. This should also be able to store any standard CZ Shadow 2 slide…
P
Printables
22LR bullet holder
It holds 40 bullets you will need to trim the extra plastic and sand a few of the holes down but other than that it can go from the printer to the field
P
Printables
Vudoo 22LR Bore Guide
Bore cleaning guide for the Vudoo 360 3 lug action. Doubles as a chamber indicator that you can attach a flag to for use at the range. This also has a tapered from mouth so it helps to wedge a cleaning patch down to the chamber size. I…
P
Printables
CCI 22LR Custom Lids for My 22LR Ammo Box
Here are some custom lids for the 22LR ammo box I previously made. I just swapped the blue filament for white at 1.4mm and white filament for red at 2.2mm to get the color pattern. Print Settings Printer Brand: Prusa Printer: i3 MK3…
P
Printables
Remington Thunderbolt Lid for 22LR Ammo Box
This is a customized lid for my 22LR Bullet Holder . I am working on lids for the CCI family of bullets as well as a Remington Golden Bullet lid. I'll be posting them as I get a chance to print them and see how they look. This was printed…
P
Printables
22LR Bullet Holder
UPDATE 03MAR24 I was asked to make a Lapua lid, so I did. UPDATE 16NOV18 I finally got around to adding custom lids for Remington Thunderbolt bullets and four different CCI bullets ( Mini-Mag HP, Mini-Mag HV, Quiet-22 and Standard…
P
Printables
.22LR Checktool Hülsenboden
DE: Mit diesem einfachen Tool kann man einfach die Dicke des Hülsenbodens bestimmen, um seine Munition entsprechend zu sortieren. Sollte auf die meisten Messschieber passen; Tool aufsetzen, Messschieber schließen und nullen, danach…
P
Printables
22lr Spinning Dispenser
A .22lr ammunition dispenser, with a spinning lid. Each stepped segment dispense 5 cartridges. It has two different lids to choose from: A solid lid. Same lid, but with added inspection holes. UPDATE: I modified the bottom part to make…
P
Printables
UNV Uniview IPC322LR3 camera wall mount rings (straight, angled)
These are camera mounts for the Uniview UNV IPC322LR3 series. Printing it resulted in quite snug fit on the camera. The screw holes were OK too, hold the camera fine. The waterproof connector fits inside the ring, so the connections can…
P
Printables
Multi-Caliber Ammo Storage Bin for Harbor Freight STOREHOUSE 20-Bin Organizer – 22LR, 45ACP & 9MM
This ammo storage bin is designed to fit the Harbor Freight STOREHOUSE 20-Bin Medium Portable Parts Storage Case and hold multiple calibers in one compact unit. Perfect for keeping small arms ammunition organized within your modular…
P
Printables
22LR Suppressor & Ammo Storage Box
If you are a .22LR shooter and have been looking for a suppressor storage box, you might be in the right place. This box is designed to hold a 1" diameter 22 suppressor that's up to 6 inches long. I designed two original pieces for this…
P
Printables
STG-44 22LR Magazine Storage Box
This is a simple box for storage of up to 4 magazines for the GSG STG-44 22LR. I used the original mag shape clip made by Alexander King Salvatore to start with. I added a little more room for a slightly looser fit. The holes in the base…
P
Printables
22LR ammo Storage Bin
I made the container support double layer trays for the 22LR by stretching the bin height. I reduced the filament usage in the trays by reducing the thickness of the ammo slots in the trays. The trays in the box are a little tight fit so…
P
Printables
Ruger Mark 22LR Pistol Magazine Pouch
These were designed specifically for the Mark IV 22/45 mags. They may fit other mags unchanged, or with some scaling, or with small mods. Fusion 360 file included. Mags fit bullets inward or out. Optional magnet to temporarily join…
P
Printables
Lid for 50Cal Ammo Can / Box 22LR bulk storage boxes
Remix of Lid for 50Cal Ammo Can / Box 22LR bulk storage boxes
P
Printables
22lr Stripper Clips
Don't wanna carry a whole box of ammo, just enough for a reload or two... Only have one magazine, don't wanna pay the $20 - $50 pricetag for another... These little clips can solve these problems. Toss a couple of these lil guys in your…
P
Printables
Federal and Federal Auto-Match Lids for my 22LR Bullet Holders
Since I made my 22LR Bullet Holder I have made a bunch of lids with different logos on them, and I was asked to make one for Federal Auto-Match ammo, so I made three. For the "Auto-Match" and "Federal Auto-Match" lids, color changes are:…
P
Printables
Different Safety flags .177 + .22lr / Sicherheitsfahne 4,5mm + .22lfB
Safety flag in three variants Two for .22 and one for .177 / 4.5 mm. "Bechriftungsfahne_FP" and "Stopfen_FP" belong together. The labeling on "Bechriftungsfahne_FP" should be made more visible by a color change. You can still make out the…
P
Printables
AICS 22LR Safety Flag
Safety flag for AICS pattern 22LR bolt action rifles. I printed them in PLA and PETG in .2 structural 20% infill. Supports may be necessary under the magazine catch lug. If you print this and like it, please give it a like here.
P
Printables
Beretta Bobcat 20x 22LR 10rd Magazine Follower
This modified follower allows for 10 rounds of 22LR to fit in the standard 8 round magazine of the Beretta Bobcat 20x. To install: Remove the pin from the existing follower. The pin has a pointed end. You must push the pin out from the…
P
Printables
Beretta Bobcat 20x 22LR Magazine Loader
A tool to ease the loading of Beretta Bobcat 20X .22LR magazines. It comes in two variants, one with wings and one without. The wings variant allows for easier unloading and improved one-handed operation. The no wings variant is more…
P
Printables
22LR x 100 print in place ammo storage
Design Concept The 22lr x 100 print-in-place ammo storage is designed for efficient and compact storage of .22 caliber rounds, tailored for enthusiasts who prioritize both function and organization in their collections. Purpose This model…
P
Printables
rehausse munition .22lr pour sellier bellot
facilite la prehension des munitions en les surelevant
P
Printables
Revised of 22LR Ammo Tray
The bullet tray has been redesigned for easier printing and to use less plastic.
P
Printables
CZ 452 Brno 22LR Thread Protector
It's pretty simple, just a thread protector as a rifle I purchased was missing it. I printed in black carbon fiber PETG, but increased the scale to 104% on the XY (not Z) to make it a tad looser.
P
Printables
Ammunition helper .22lr for CCI or Eley. Munitionshelfer für .22lfB für CCI oder Eley.
There are already some models that lift half of the cartridges to make them easier to grab. However, since I couldn’t find one that works well with the flat cartridge holders / trays / whatever-you-call-them used by CCI or Eley, I took…
P
Printables
Cl. 22lr Box Kleinkaliber kk
You can put a box of 22lr caliber in it, so the tip of your bullets dont get dirty.