Walther GSP 22lr Dry Fire Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dry Fire Adapter for Walther GSP .22lr This adapter keeps your slide open in place that you can press the trigger and…
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 280
- Makes
- 2
- Views
- 2,538
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Dry Fire Adapter for Walther GSP .22lr
This adapter keeps your slide open in place that you can press the trigger and hammer only moves a little and stops on slide.
Thanks to that you can safely train dry firing the pistol.
If you can not dry fire with the adapter, try shortening it a bit by sanding the back surface.
I iIncluded also file with hole for 5x5x2mm magnet to help the adapter stay in place during recocking.
For some pre 1980 models you may need the LONG version (magnet not needed for it)
You can recognize by half circular cutout on the end of slide.
How to use:
Open the slide and insert the adapter like a safety flag.
Close the slide and dry fire.
After fire rack the slide - you can do it only a litte just to cock the hammer.
How to print:
No supports needed - print in file orientation.
Use 4-5 shells for durability.
Infill doesn't mater a lot.
If you can not dry fire with the adapter, try shortening it a bit by sanding the back surface
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2-0.3
Infill:
20%
Filament:
Colorfil PLA PLA
Notes:
No supports needed - print in file orientation.
Use 4-5 shells for durability.
Infill doesn't mater a lot.
Category: Sport & Outdoors