1,188 models
Update 2024: Download my new "SMG MK2" design here: https://cults3d.com/en/creations/fast-smg-mk2-vr-gunstock-quest2-quest1 UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body…
Jo Jos bazar adventure Sex Pistols. They ride bullets to help guide them.
I've created this silencer for my ASG CZ-P09 airsoft gun, so it still fits in the holster. The end cap is just hold on by camo tape, but can be glued on if wanted. I glued a bit of foam onto the infill parts, to create small pockets to…
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Original model “ The Mandalorian Blaster (Final Version) ” by Straekers_Armory you can find here: https://www.thingiverse.com/thing:3977528 If you’re a huge Star Wars fan then I’m sure you’ve already signed up for the new streaming…
This is hopefully the first of many more mods available for this design, The Pistol takes influence from modern-day firearms. I hope this is a welcomed addition to everyone's collection.
Perfect for: Collectors Keychain accessories Gifts for friends or firearm enthusiasts The design is carefully detailed to ensure high-quality prints even on basic 3D printers. Printing Settings Recommended layer height: 0.1–0.2 mm…
Models can be printed upside down with NO supports! Print Settings Rafts: No Supports: No Resolution: .12 Infill: 15% Filament material: PLA
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these new alternative cosmetic parts for this blaster and its variants here (pictured below)…
Hi Craig, This was all I had, hope it was what you were after, Cheers Jace https://en.wikipedia.org/wiki/TT\_pistol
this model is non functional but the trigger, slide and magwell still move.
Leon S.Kennedy orignal pistol from the video game Resident Evil 4. This pistol is based on a real one the HK USP. I have used the dimension of this real pistol to make the model. If you want to 3d print it, I advise you to choose the…
Foxbat is GIANT handcannon Nerf pistol, which uses Talon or Angled Talon half-dart magazines, loaded through the grip! Blaster Overview: Firing Demo: READ THE "Print Info" SECTION of this description page before printing the blaster!…
Wildstyle is a Nerf-style shotgun pistol that uses Silly Shells! Wildstyle is loaded one shell at a time, and it has a manual ejection lever that flings the shells out of the blaster. Firing Demo: Blaster Overview: Please refer to the…
Pistol model CZ 70, cal 7.65 Print the left and right parts, 7x connecting cylinders, then grip - it is advisable to add an outline around the grip to hold it on the printing bed. Attach the grip with screws WARNING! Use only as decoration!
This is my Tokarev TT-33 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. I made my example at 1:3 scale on my resin printer. You could scale it down for GI Joe…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! The Zc Aus is a pocket-sized, high-powered, mag fed (5-13 dart capacity) foam dart (Nerf) spring-powered…
Scroll down for firing demo video ⬇ Please leave a like and and consider posting a rating/make if you print and enjoy the project! These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing…
The RE-45 is a staple of the Frontier war, initial appearing in the hands of IMC soldiers as a effective suppressent for local dissent and providing cover fire for advances. Eventually it made it into the hands of Militia forces and again…
Needed a grip that was more vertical. This works. Print it upside down, minimal support need for grip cutout area. If someone is more capable than me, it needs some texture added. I printed with low resolution to simulate texture. It's…
The agent chamber (from the game valorant) pistol / sheriff / headhunter. Supports recommended This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this…
Here's my attempt at the MG6 Magnum Pistol from Halo. Just use the exploded image for assembly, you may need to sand the connection points so they fit. Here's the assembly and painting instructions…
This is a multi-part version of Chamber's Headhunter heavy pistol that I have split into the 3 component colours of the stock appearance: gold, black, and white. Print settings in image 0.15mm layer height (you can get away with 0.2mm)…
I have loaded a couple of different options here for you to determine how to best align it to how you want to print it. Print instructions Category: 3D Printing
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
Go to https://www.patreon.com/lilykill to support the original creator. Materials selection: Handle - I recommend a wood-filled PLA, but not the Bamboo powder ones. They're too light. I used a walnut filled PLA to get a darker finish,…
Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…
This hat is designed to look like Oklahoma State's Pistol Pete hat. The hat requires supports to get the correct shaping. Normally I prefer tree supports, but I would suggest on this one doing traditional supports. I originally attempted…
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
Now your Dummy 13 can have a semi-functioning pistol instead of a boring old static model! Inspired by the moving pump shotgun concept of my previous model , I made a pistol for D13, but with a functioning slide that moves back and forth!…
Description: Joy Con gun for shooter games. Printing: Layer height: 0.2 Supports: No Material: PLA, PETG, ABS Assembly: The connections between the parts can be glued or connected with M4 screws. The extension is not necessary and is only…
Printing Instructions Print without supports and at 100% infill. If using PrusaSlicer, I recommend disabling “Thick bridges” and enabling “Detect bridging perimeters”. If you have assembly issues with the holes being too small, you can…
Everithing is 0,3. only wheel is 0,10(not important) and screw is 0,20. When printing barrel use 60% infill for barrel and straight pattern. Barrel can bend on pressure. Added bolt with smaller radius to fit better.
Simple pistol-grip handle for use with iwata airbrushes (only tested on my HP-CR). This is based on https://www.thingiverse.com/thing:5220149 , but with some modified dimensions to allow for unscrewing the back cover without removing the…
I created a holster that fits a Glock 34 pistol that I use for all of my SWAT Dummies. I've included the pistol which has a red dot sight and a weapon light. *** UPDATE: I've included my entire drop holster collection here for you to…
Rust Eoka pistol replica. This was made with the obj. files from the game so should be perfectly accurate to the in game version. The Eoka pistols in the image where printed with wooden filament for the handles and normal grey PLA for the…
A sniper pistol grip for the that fits AR family (milspec dimensions airsoft or realsteel) Very ergonomic, with finger grooves, thumb rest, trigerfinger rest, and detachable palm shelf
This is my 1911 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
Giant Lego pistol revolver (x10) Print two part and two join
Remix to fit my local brand airbrush. It's JAS 118x series like airbrush. I made it slightly bigger. Also made it snap-on. It's 11.5mm hole. To tight fit i heat it a bit with gas lighter. Supports needed. Orca slicer tree auto support…
The title says it all. A stand, made to fit the sizing of a Glock 17 Gen 5.
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I broke my crossbow bolt. The metal tip was still good so I made this replacement arrow body. Print instructions Print as it is. I used PLA. Use a support enforcer in the part where the metal tip goes. Print it strong so use high…
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
The boys are getting excited for Halloween so I'm getting constant requests for the Scar next. Will see ; ) It will fit on a 200 x 200 bed and its perfect for my 10 year old but it could do with being bigger to accomidate the finger going…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
Pistol Hand plus the other hands postures models make Lucky 13 very expressive. I printed it in PLA, 0.15 layer height, no supports and instead of setting 100% infill I setup walls thickness enough to fill the inside with a nice pattern.…
I wanted a little more detail in the Lucky 13 pistol that was still easy to print without supports. ***UPDATE 06/13/2022*** Tweaked the serrations and depth of the groove separating the slide and body. I used a 0.4mm nozzle and PrintBed…
This is a simple pistol holder. I tested it with a Tokyo Marui Glock, a CZ P09 from ASG, a ICS BLE Alpha and a HK 45 Tokyo Marui. Do not use it with a High capa. I'll post another version later. Do not hesitate to list other compatible…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
takes a 1/4 in rod will need glue. Category: Props
Display Stand for all CZ 9mm Pistols (Shadow Series, TS, CZ75 and Polymer) Version with Logo for Compact Pistols (might also work with full size) Version with longer foot for Full Size Pistols Printed in PETG or PLA 0,2mm layer height 3…
Edited 10/5/24: QUEST 3 VERSION AVAILABLE Cool new Features! Made this grip Quest 3/Quest 3S compatible (Grip LED, Geometry Changes) Added a belt hanger assembly Added a knuckle strap battery door Added a knuckle strap Backwards…
These bolts work okay for target practice, although not with the best accuracy. Assuming normal target blocks are used, the tips should be fairly durable and last a while. They do not require any supports but do need a 10 mm wide brim as…
Here's my attempt at a laser pistol from Fallout. I scaled it up to 200%. You might want to sand the connection points so they fit if your tolerances aren't perfect. Here’s my assembly and painting video for this…
This is a remix of the original 3-part rubber band pistol by Plastic Flow. It is an easy and fast print with a lot of fun when printed! This version consists of 4 parts, but only 3 are still required if you only want a rubber band pistol;…
The 10mm pistol is my favourite pistol in Fallout 4. It looks very interesting, so I've modeled it :)
Modeled this to fit the SBA3 Pistol Brace. This is intended to be used for storage and display only as having this installed in your pistol brace while in use may constitute modifying your brace to be a stock. I would recommend using a…
I was commissioned a Glock 17 magazine wall hanger so my customer could hang their magazines onto the wall instead of laying them flat on a shelf all the time. I made a 1 / 3 / 5 version so that people that have either more of less mags…
Introducing my meticulously designed 3D model holster crafted specifically for the Ruger Mark 4 22/45 Tactical with a 4.4" barrel . Precision-engineered, the holster is molded to perfectly fit the contours of the Ruger Mark 4 22/45…
This is a BETA release of the Dan Pistol by Orion Blasters. Posted with permission by https://orionblasters.com. Hardware kits available here: https://outofdarts.com/products/orion-blasters-dan-pistol-hardware-kit 3MF for Bambu Slicer is…
The original thingiverse post (https://www.thingiverse.com/thing:4723570 ) had an amazing model by the user Kuro ( https://www.thingiverse.com/kuro2/designs ). The main issues are that the model files are not split, making it harder to…
Flintlock Pistol for Carnival On the search for a matching gun to my carnival costume, I was unfortunately not found. So I created myself from several models that I could find myself a suitable. And have designed this beautiful Flintlock…
look at the original
Destiny - Thorn Pistol V4.1 (Full size) For better pics of this model, see other users makes below Latest update: More updates to shells 3 & 4 to V4.1 Seperated all Thorns and Pivots etc into individual files Included new blender file of…
This is a digital 3D printable model of the blaster from Star Wars The download contains pieces of the blaster ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the…
This is a remix of an older model by Mieszko Lacinski . I did some cleanup of parts that didn't fit together, and modified for easier printing. Separated the dragon head at the base of the hilt into it's own piece. Combined some of the…
Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join
I've been having fun using Shred-er mags with the Vigilante, but in my shop I'm frequently hunting insects larger than flies. A little more ‘oomph’ would be fun. Current versions: The V10 barrel and V8 cylinder are quite functional, well…
My boys had watched a classic spy movie and were intrigued by the pistol with a silencer. So I made a couple for them to play with. They look really good and the lads are enjoying playing good guy bad guy in the yard. You can size them up…
This is a magnetic pistol holder. Can be mounted to the dash of a vehicle, the side wall of your gun safe, under a desk, under a night stand, inside a center console, etc. The possibilities are endless I needed a place to put my pistol…
Are you also working on a cool project and need to add pistol grips to it? I needed some grips when I created my high speed camera slider The Matrix Rifle , formally called SlowMoSlider221 , so I designed these! The front grip is made to…
Pistol Stand for a gun safe. Holds 3 dual stack pistols. Has a cubby space for optics covers / whatever you want. Printer: Ender 3 S1 on PEI bed Material: E-Sun Orange PLA+ Resolution: 0.2 NozzleTemp: 200 Bedtemp:60 Infill: 20%
Pistol Stand for a gun safe. Holds 3 single stack pistols. Has a cubby space for optics covers / magazines. Has a backplate so they don't slip. Printer: Ender 3 S1 on PEI bed Material: E-Sun Orange PLA+ Resolution: 0.2 NozzleTemp: 200…
I printed this with no supports or brim. But you can draw on supports in the assembly holes if you feel like it. Don't use supports for everything, as they will reach all the way through the barrel.. Superglue the Tip to the silencer body…
Save your thumb! This is a simple speed loader for 380 Auto micro pistol single-stack magazines. It works well with the Taurus Spectrum, Bersa Thunder 380CC model, and probably other 6 - 10 round micro 380 pistols. You can use just about…
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
Structure et crosse pour un pistolet Artemis CP2 / Diana chaser
10mm Pistol from Fallout 4. The pistol upper uses 2 M3 heat set inserts to attach the NO SIGHT plate or the reflex sight mount, and the reflex sight mount uses 2 of the same M3 heat set inserts as well for securing it to the mounting…
Since I'm back to owning a Glock Pistol, I thought it was about time to rework my original Glock gun stand and bring it to 2025. I made this stand for the purpose of being able to store my gun in my bedroom gun safe or on your night stand…
Model fix so you can print them with any orientation without slicing errors
updated and added a few files 5/22/24 Read differences section for more info. single piece receiver printed flat on base, tree supports for release slot and trigger area. Can do tree supports for the larger round holes if printer isn't…
Very simple picatinny for artemis / snowpeak PP750 & PP700 Only a friction fit sufficient for bipod, not for any kind of sighting attachment please.
Hexagonal Bolt for Pistol Crossbows. Print in Place with supports, 3 Perimeters and 15% infill
The Volcanic Pistol Having recently printed the excellent Cattleman Revolver model from agepbiz , I thought to myself: You'll be shocked to hear that I too, have been enjoying Red Dead Redemption 2. So I sat down, spun up Autodesk 360 and…
Here's my version of Boba Fett's Blaster pistol from The Mandalorian/Book of Boba Fett. Just print out all the part files and glue them together(I split it up for my resin printer) be sure to post a make and check out my other designs If…
BS-17 Pistol Grip by Qwerm A knock off of TangoDown's BG-17 AR pistol grip. This release also includes a STL that allows you to create a textured section on the grip. Orientation: Print it facing up. Settings Used: Material: PLA+ Extruder…
I designed this. printed the handle in two parts and used the pin to help hold it together. I ended up printing this at 80% so that it fit my hand so you may want to check that out. Everything printed fine and fit together no issues.…
I modified the model in order to make it printable without supports, at the cost of some detail.
Couldn't find anything as nice as I wanted so remixed some existing stuff on TinkerCAD. Fits the original pistols perfectly (maybe other stuff too who knows) and I believe it would fit most swords available too. Pictured is the Katana…
I was watching a video from Punished Props where he made himself a Borderlands Pistol out of foam. I really liked the look of the pistol. And in the words of Bobby Duke "I want that", so I decided I wanted to make one. But my strong suit…
This is a simple speed loader for the Smith & Wesson M&P Shield EZ pistol single-stack magazines in 380Auto and 9mm Luger chambering. It may also work with other magazines of a similar size, but is specifically crafted towards the M&P…
Hey folks, This is a repaired and remeshed version of Panderazo's DC-15s pistol. I've made the following modifications: Joined small triangles Englarged the inside diameter of the barrel and made it 190mm deep to fix the mesh clipping…
This is a remix where I have shortened the length and added fitting guides to hold the two parts together. I have also made it in two parts that slide together to make it a bit more robust. Both parts printed in PETG at 0.2mm layer…
This is a remix of https://www.thingiverse.com/thing:4760656 . I use elastic hair ties as a homemade knuckle strap for my Quest 2 controllers and added a collared pin inside the bottom hole to allow the attachment of the hair tie to the…
remix del modelo https://www.thingiverse.com/thing:2508739 Pistola para spray universal, muy recomendable para pintar con espray , comodo y facil de imprimir. el modelo original ha sido modificado por que la pieza central generaba un…
I created this stand to organize handguns for storage in my safe. It is a prong-type stand, meaning that a prong is inserted into the barrel of each firearm for support. Prongs are sized for 9mm pistols. So far I have found that strength…
This is a pistol-style RC transmitter based on Arduino . It was created as a simple and budget-friendly alternative to commercial transmitters. It covers the basics and works well for controlling cars, boats, or other models where you…
Hi! I designed this blaster over the course of several months and have made a decent product. I am still working on it so don't expect it to be perfect. It was originally designed for proper hardware, but I realized that it can handle the…
