1 / 1
Crossbow bolt body for pistol crossbow
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I broke my crossbow bolt. The metal tip was still good so I made this replacement arrow body.
- Rating
- 4.667 / 5
- Likes
- 223
- Downloads
- 1,197
- Makes
- 4
- Views
- 5,849
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
I broke my crossbow bolt. The metal tip was still good so I made this replacement arrow body.
Print instructions
Print as it is. I used PLA. Use a support enforcer in the part where the metal tip goes.
Print it strong so use high temperatures for good layer adhesion, lot of perimeters and enough infill. The arrow part has a slot where the wing part locks into, so there is no need for glue.
After printing make sure to check that the arrow has enough space in the barrel to travel without friction.