Oculus Quest 2 VR pistol grip - Fits Quest 3 controllers
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.98 – €1.19 net (excluding VAT)
For file: chewey_glk-17_front_lower_02mm_petg_mk3s_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.09 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
VR grips for Oculus Quest 2.
- Rating
- 4.719 / 5
- Likes
- 1,354
- Downloads
- 8,323
- Makes
- 33
- Views
- 42,407
- Reviews
- 32
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT: This is just a model shell grip for a VR controller.
NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here.
NOTE2: This will fit a Quest 3 controller, but it may be slightly on the loose side. Try use a bit of foam tape to pad the gap for a more snug fit.
Introducing the "Chewey_GLK-17"!
After seeing a couple of pistol grips on the market compatible with the Oculus Quest 2 touch controllers, I want a set for myself to use with Pistol Whip and other shooter VR games on my Quest 2. However, I didn't want to pay $70-90 for a set for both hand controllers, so I decided to just make my own kit.
This is based on the Glock 17 1:1 scaled model by a user name archie73 on thingiverse.
I also used the 3D scanned model of the Oculus Quest 2 touch controller by a user name stevesch on thingiverse. Specifically, the "quest2-touch-R-50k.STL"
With my fledgling skill at CAD and focus on comfort, the final product may not look as cool as the other designs. But I put a lot of focus on comfort, so I play tested with it a lot and have removed all the jarring uncomfortable bits for a comfortable extended VR session.
Each hand controller needs:
- 1x Grip
- 1x Slide
- 1x Front lower
- 2x Screws
Assembly notes:
- One screw is used to join the Grip with the Front lower. These were separated for ease of printing.
- One screw is used on the side to secure the Slide in place in case it slips off while mid VR session.
NOTE: The grip STL is for the RIGHT hand. Simply mirror it to print for the LEFT hand.
Derivatives and remixes are under Attribution-NonCommercial-ShareAlike, but please also include its original name "Chewey_GLK-17" somewhere on the final design. Please do not monetize on this model. Thanks!
Print instructions
Layer height: 0.2
Infill: 15%
Support: see "Suggested_print_orientation_Chewey_GLK-17_set.3mf"
Refer to "Suggested_print_orientation_Chewey_GLK-17_set.3mf" for print orientation and paint on support using PrusaSlicer.
The grip and front lower should be the same color.