Counting matching models…
This a 3D scan/model of the Oculus/Meta Quest 3. These 3D models are very accurate and you can use them to make accessories for the Oculus/Meta Quest 3, print them, or do whatever you want with them. If you would like 3D models to use to…
Magnetic Gunstock for Oculus Quest 2 (Improved & Simplified) After printing three of these for friends I decided to improve a few issues I found and greatly simplify the process for others. Most of the source models have disparate and…
Snaps on Elite Strap. Cable can be removed. For cables thicker than the Link cable. My cables are 5.2mm and 5.1mm Print instructions Printed in PETG, 0.3 Layer Height, printed with Brim for better Heatbed adhesion
I liked the way this mount looked and held the controllers but didn't like the idea of actually screwing it to the wall so I removed the screw holes and added a small channel for 3M Command Strips. I used one of the large sized, 5lb…
Semplicissima staffa a muro porta cavo del visore 3D Oculus Rift, niente di speciale. Attaccato al muro con bioadesivo Category: Computer
Wanted a place to put the oculus instead of leaving it just sitting around.
NEW FOR QUEST 3S! Quest 3 version here: https://www.printables.com/model/933285-oculus-meta-quest-3-stand-with-carrying-handle-for This is an Oculus Quest stand to be used when your Quest is not in use, and meant to facilitate easy…
The original plastic was thin and brittle. I designed and made these with ABS. The design is slightly larger than the original parts and doesn't shroud the spring below. The thumb pad is flat for printing and isn't as sticky as the rubber…
Remixed for supporting common 10000mAh powerbanks. Possible to use other powerbanks with a bit different dimensions. Recommended to glue parts together.
I always liked the design of charging station for Quest 2/3 like this . As there is no option for quest 1, I designed one myself with convinient USB C magnetic adapter. This design provides charging stand for quest 1 with hand…
A small piece that converts clips intended for the normal link cable to support thicker third party cables. NOTE: this does not include the strap clip - this assumes you already have one but your 3rd party cable is too girthy to fit it.
infill-100% I mae this model because batterys in my controllers blown up with acid, that had ate these parts? so i repaced them with this
Wanted a place to put the oculus instead of leaving it just sitting around.
Printed in 3 parts, used superglue to bind the pieces together. Has been holding strong for over a year.
This size works great for me, but i included a parametric f3d file that lets you adjust for your own hand size. Just grip the controller comfortably but firmly, and measure the distance from your hand (a bit below the knuckle) to the…
Got a request for GAIM VR for Blaser R8. VR Simulator with Oculus 2 and 3. Have 2 friends from work who requested to make their GAIM VR more realistic to use the real rifle for training in GAIM VR. Both of them say they become better in…
I was wondering if Quest 2 straps could be made compatible to the Quest 1. Indeed, it is possible. I liked the design of @sekazi (https://www.thingiverse.com/thing:4624192), but the adapter is movable, so I decided to make it 2mm longer…
Printed in a firm but flexible TPU, this link cable clip can be opened up wide enough to go over the Elite Strap, and opened on the other side enough to completely cover a link cable. Holds the cable very securely. Other Oculus users…
Plastic part of the Quest 2 facial interface. You can Glue in some foam padding or Velcro to have detachable padding. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Any…
Anker PD 10000 Powerbank holder for Quest 2 elite strap. For counterweight and extended battery life. If there are comfort issues from the mounts please use some padding on the back of the strap Tested on Elite Battery strap. But it…
This is a holder for Anker PD 10000 for mounting it on the back of Oculus Quest strap allowing it to be used as a counterweight and giving you ability to extend your play time. It was made to be easily detachable so that you could fit…
This print turns the Ikea Iskarna LED light into a VR headset stand, with a spot for the controllers. It mounts using an existing screw, just remove the screw, set the lamp on the print and screw it back in.
Oculus Quest 2のバッテリーを拡張するマウンタです。 Anker PowerCore 10000を、標準ストラップの後頭部に固定します。 Extend Battery for Oculus Quest 2 ・Anker PowerCore 10000 ・USB Cable (Type A to C) ・Rubber Band (Size 31) Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Wanted a more stylish wall mount for my Rift sensors. Used topology optimization to come up with this look. Designed to stick to the wall with Medium 3M adhesive pads. Category: Games
Updates: 9/2/19: Improved sling mounting point on Butt Added adjustable pin holes to Butt, Linkage 1, & Linkage 2 to prevent the joints from slipping Added Pin 3 ### Summary: Another addition to the list of Rift gun stocks to choose from…
Easy & non-intrusive way to hang your Oculus Rift CV1 on the wall. Designed to clip into the wall mounting piece for the 3M Medium Designer Hooks (Pics further detail this). I swear the pictures make my Rift look a lot dirtier than it is.…
Ahora puedes agregarle un buen powerbank a tu oculus
Better Handstraps for the Quest 2 I Printet the little Inserts on my Anycubic Photon Mono in Clear Resin and The Stretcher on my Anycubic I3 Mega in Procatc Signal Red The Stretcher is designed for 20mm Belt, I used a 20mm x 0,5 mm Belt.…
This is a battery support for Oculus Quest 2 with NEWZEROL head band. The powerbank is a E-Tonic 10.000mah I received as a gift. I printed it with Pet-g and 0.8mm nozzle (Prusament Ocean Blue), use some support for the clip part, the…
This is a battery support for Oculus Quest 2 with NEWZEROL head band. The powerbank is a PowerADD Energycell 5000mah but you can use any similar cilindrical powerbank with a diameter of about 27mm. I printed it with Pet-g and 0.8mm nozzle…
I printed this at 0.15mm quality and 50% infil just to give it some extra strength but 30 infil is probably OK Remixed the internal overhang to fit my ACER G226HQL monitor which is only 17mm deep Print Settings Printer Brand: Creality…
You will need 6 M3x6 screws for assembly. The rest of the parts are glued on super glue.
Free up the space on your Ikea Fredde desk and mount your Oculus Sensors on the frame allowing you to set the hight of the sensors to the perfect point. I use these to get the best sensor detection at my desk when in Flight or Racing…
Vertical Stand for Oculus Quest2. Foe added functionality see: https://www.printables.com/model/404773-oculus-stand-vertical-elite-add-on
Based on the original 3d model provided by Meta, found here: https://developers.meta.com/horizon/downloads/package/accessories-guidelines/ This expands the sides with accommodation for glasses frames. Definitely not that comfortable…
Oculus Quest 2 Wall Mount For controller and headset. The cover for the screws requires two 5x5 mm magnets. The model does not require any supports .
This is a charging dock for the Oculus/Meta Quest 2 and Oculus/Meta Quest 2 Elite Strap with Battery with controller holders MK 2. There is a two-part base for printing on a smaller build plate like an Ender 3 v2 or others in the Ender 3…
Changed the way the bracket is attached on hsw. My printing settings layer height: 0.2 perimeters: 3 infil: 20%
A wall or ceiling mount for the sensors of the Oculus Rift. Just two parts and a little hardware Parts - Wall Mount Bracket and Swing Arm Hardware needed unless you can substitute. 2 - Brass Thumb Screw, Knurled Head, 0.75" Length, Fully…
I modified the genious Oculus Quest 2 Wall Mount from Tony Youngblood to be hang from an Ikea Bergshult shelf as I don't like to drill into the wall. Quoting from his design: The lenses face down so dust won't fall on them. The…
This clip is for routing the 3.5mm cable to the right side of the headset for Quest 3. Instead of stretching the cable across the top, it's now routed around the back of the headstrap.
This is a cheap and easy to construct gunstock for the Meta Quest 2 that i use myself all the time, its great for games such as: Ghost of Tabor, Contractors or basicly all VR shooters. It comes in at about 180 grams that is nicely…
NEW FOR QUEST 3S! Quest 3 version here: https://www.printables.com/model/933285-oculus-meta-quest-3-stand-with-carrying-handle-for This is an Oculus Quest stand to be used when your Quest is not in use, and meant to facilitate easy…
With cables for the Oculus Rift getting more and more rare by the day I decided to create a floppy bay bracket to get the connectors to the front of my PC case and give them some support to prevent the connectors from breaking. Though it…
Lowered the connector so it can reach further down and cover my ears better. I uploaded the fusion file for remix because it sucks converting from stl. I printed in PETG at 15% with tree supports. A couple parts are not easy to remove but…
Edit: this model relies on hooking under the facial interface at the apex of the nose. See the picture and check your unit before printing. I looked at all the Quest 2 Wall Mounts and I really wanted to just print one and be done with it.…
I designed this set of eyeballs using Fusion 360 to give the Oculus headset a bit of style. I redesigned them to make clip stronger. Just print clip on its side separate from the eyeball and thread pieces together. Eyes can be rotated in…
This clip was designed to manage multiple cables, primarily for the USB cable running from a power bank located at the back of the strap when a cable is directly connected to the PC, and this cable sticks out. Material: PETG
Print: Layer Hight 0.2mm Infil 15% Scalable Print in multicolour depending on your printer and slicer. Happy Printing
BEHOLD!!!! A wall mount for the oculus quest 2 controllers. Print with 3 perimeters and at 0.2 layer height. I integrated supports for the bolt lock segments.
Updated I've added a new version of the RS00 Flat sensor mount.I found that if I wanted to take the camera off the wall I had to spin it around and around..... so I've fixed that by making the screw fit into a knob that you can turn by…
This is an Oculus Quest wall mount that has been optimized to save on filament and printing time while still being strong enough to hold your tech! There are 2 designs Hex Pattern: Saves the most filament Plain: Removes the hex pattern if…
Recommended Printing Parameters Material: PLA or PETG Layer Height: 0.20 mm Quality Infill: 15% Supports: None Brim: None
Universal lens protector for Oculus Quest, Quest 2 and Rift S. These clip onto the lens adaptor mount and prevents glasses from coming into contact with the headset lenses. Good for when you don't want to add facial interface lens insert…
Oculus Rift CV1 Wall Mount The dust hasn't a chance to get on lenses if it is stored like this. I made this holder for Oculus Rift CV1 because I haven't found any other suitable for my room. It is just a simple and minimalistic design and…
This is just a simple adapter that makes it easy to use other wrist straps with Oculus Quest 2 controllers.
You need some 15mm wide double-sided velcro strips to hold the power bank and the mount. I'm using xiaomi 5000mAh (perfectly balanced) and 10000mAh (too heavy) power banks. Happy Gaming！ Print Settings Printer: Micromake D1 Rafts: Doesn't…
First upload, so go easy on me! I extended the length of the stock by 75mm which makes the length from the back of the grip to the butt of the stock around 210mm (~8 ¼"). The total overall length is just over 279mm (~11") which just fits…
The original plastic was thin and brittle. I designed and made these with ABS. The design is slightly larger than the original parts and doesn't shroud the spring below. The thumb pad is flat for printing and isn't as sticky as the rubber…
Replaces the original battery cover but reuses the original wrist strap to let you have a controller “knuckles” style strap without having to use TPU. print with supports. Model provided is for the right controller, mirror it in your…
This is a remix of "Oculus Rift Sensor mount" by "DoctorLaser" ( http://www.thingiverse.com/thing:1754041 -- Thanks for the original idea to remix!) I added a screw mount to it to fasten it to the wall more securely. Enjoy. Print…
This is a simple cable clip for Oculus Quest 2 for 6mm-wide link cable. Pretty obsolete with the Airlink Beta (works pretty well on 5GHz WiFi) but maybe someone will find it useful. Be careful - PLA plastic is harder thant the plastic…
Simple Wall bracket to hang the Oculus Rift Headset and hand controllers Category: Computer
Sometimes I use headphones with my Rift S and I hated how the cable always flopped all over the place. Print without supports as they are modeled for better results. Can be printed in any material. There are two versions, one is a bit…
This is a bracket I made for the original Oculus Rift Headset after mine broke. Print the bracket itself with supports and a brim. But the round adapter that attaches to the headset shouldn't need either one. Everything should fit pretty…
fits for JD96CX Right Hand Controller. Prints 3mm over size to fit around sensors. Heat gun for tighter fit.
Oculus Quest 2 PVC Rifle Grip First off would like to thank Bluefreddo for the Oculus Quest 2 controller Pistol Grips design. His design was an excellent component to utilize in creating this PVC Rifle Grip. Have been playing Gun Raiders…
A counterweight to balance an Oculus 3 with the KIWI design K4 head strap. Printed in PLA, 3 walls, 15% infil. Top and bottom attached with M3x12 countersunk screws. Added lead to make the total weight 285g, which feels about right to me.…
Dies ist ein Remix von "Mike vom Mars" https://www.thingiverse.com/thing:4025967 zu dem Brillenträger und Ständer gibt es noch eine zusätzlichen Träger zum aufsetzen, der das Elite Batterie-Pack trägt. Es wurden die Controllerbefestigung…
An adjustable audio strap designed for any kind of HyperX Cloud series headphones. Specificaly made for Kiwi design strap. Compatible with any Cloud series headphones. Printed with 100 % infill for strenght. If printed verticaly adapter…
Power bank clip is designed for Oculus Quest 2 and AlzaPower Carbon 10.000mAh Fast Charge + PD3.0 White . Select your head strap version: Original Oculus head strap - clip_original_head_strap.stl BOBOVR M2 Head Strap - clip_bobovr_m2.stl…
A 4080 hanger for the Oculus 3 with Kiwi Design head strap and my counterweight attached. This will likely not work well without the counterweight on the strap as it moves the CG to just behind the swivel points. The arm is attached to…
This fixes an issue I had where there was very little plastic between the inset nut holder and the outside of the model causing it to be weak. I also thickened the pieces attaching the cylinder to the main model by 1mm. I made the clip…
You can just print the arm which is compatible with the Koss KSC75 and use it with the part this is remixed from. You can also try the clip included which I adjusted to fit my head (and the oculus band) better for me. Category: Toy & Game…
Quick remix to the great oculus quest 2 stand to include a small little cable holder so your charging cable always stays in place. The original designer's extension platform supports both the elite strap and BoboVR strap from my testing.…
This is a remix of ThomyVR's cable router https://www.thingiverse.com/thing:3680285 I scaled the X-axis down to 96% for a snugger fit on the strap and flipped the cable router upward to accommodate setups with a cable management pulley…
Modelled in Blender. Rendered in Nomad Sculpt. NO AI. If you want to sell prints of this model, please don't hesitate to get in touch with us by DM ^^. We printed this model in transparent Resin. If you need any help with the post…
Modelled in Blender. Rendered in Nomad Sculpt. NO AI. If you want to sell prints of this model, please don't hesitate to get in touch with us by DM ^^. We printed this model in transparent Resin. If you need any help with the post…
Modelled in Blender. NO AI. If you want to sell prints of this model, please don't hesitate to get in touch with us by DM ^^. We printed this model in transparent Resin. If you need any help with the post processing to make it look like…
Modelled in Blender. NO AI. If you want to sell prints of this model, please don't hesitate to get in touch with us by DM ^^. We printed this model in transparent Resin. If you need any help with the post processing to make it look like…
Modelled in Blender. NO AI. If you want to sell prints of this model, please don't hesitate to get in touch with us by DM ^^. We printed this model in transparent Resin If you need any help with the post processing to make it look like…
The Oculus Quest 2 max interpapillary distance setting is 68 mm. This spacer forces the lenses farther apart for folks with an IPD larger than 68. There's a clip on the back that locks the spacer into place. Print standing up, no supports…
VR Rifle Stock for Oculus using Selfie Stick I like that the front hand is not fixed. WIP
An adapter to glue a broken old shaft (or a cut new one) and grip together which works in the Golf+ app for the Oculus QUest 2. Two velcro straps of 10 cm are required to mount the controller (left handed or right handed version). Can be…
I found that the repaired DAS mod still had some errors in it. Took another stab at fixing those errors. Additionally, I cut off the bottom ~1mm to make for a larger build plate surface area so hopefully it prints OK without a brim.…
i add grip for better feel and cut plastic for button and controller via photo
This is a remix from https://www.thingiverse.com/thing:2057419 and is the same as the main rail except that the attachment bars have been removed from all sides except the top to allow for faster printing, less supports, and less material…
I didn't want to tape the camera mount to the wall, screws are preferred. So I made a slide-in base for the camera mount. I modified the camera holder to have a tapered front to slide in easier. The short mounting post fits into the holder.
Like other owners of the new Oculus Rift S and Oculus Quest, I have wanted a better way to use headphones without having to put them on over the VR headset. This is my take on headphone holders. Like others, I have used the excellent Koss…
In our FabLab, we have many Oculus Quest 2 users, and over time, some of the strap clips have broken, causing the strap to lack the necessary tension. We've already ordered replacement straps, but while they arrive, I've improvised this…
Remixed from https://www.thingiverse.com/thing:4629958 This clips on to the loop on the back of the elastic headstrap. Category: Video Games
