Landinggear for Eclipson Model A (Free Version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i…
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 1,000
- Makes
- 4
- Views
- 4,205
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i designed one to glue on the free version.
it takes D3mm steelrods, wich are bended in shape.
15mm then 90° angle, then 125mm and then 25mm 40°angle.
the Landinggear has an arrow to show wich side ist the front.
it gets glues 1.5mm behind the Gluejoint of the mainfuselage.
Link to the Free .stl of the Plane:
https://www.eclipson-airplanes.com/modela
also check out the parts to make a stronger wing:
https://www.prusaprinters.org/prints/66510-centerwingspar-eclipson-model-a
if you want the STEP or Fusion360 file let me know. i'll share it.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Purefil PLA
Notes:
included my Projectfile from Prusaslicer!
Print the Tire with TPU i used 2 Perimeters and no Infill
the Rims can be printet normel with PLA
Category: R/C Vehicles