Landinggear for Eclipson Model A (Free Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i…
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 1000
- Wydruki
- 4
- Wyświetlenia
- 4205
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i designed one to glue on the free version.
it takes D3mm steelrods, wich are bended in shape.
15mm then 90° angle, then 125mm and then 25mm 40°angle.
the Landinggear has an arrow to show wich side ist the front.
it gets glues 1.5mm behind the Gluejoint of the mainfuselage.
Link to the Free .stl of the Plane:
https://www.eclipson-airplanes.com/modela
also check out the parts to make a stronger wing:
https://www.prusaprinters.org/prints/66510-centerwingspar-eclipson-model-a
if you want the STEP or Fusion360 file let me know. i'll share it.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Purefil PLA
Notes:
included my Projectfile from Prusaslicer!
Print the Tire with TPU i used 2 Perimeters and no Infill
the Rims can be printet normel with PLA
Category: R/C Vehicles