61 models
GitHub - tetsu97/WristWatch-G2-Extruder: This is WristWatch, a standalone extruder designed by @bythorsthunder WWG2 is built as an alternative to WristWatch BMG etruder - but it uses Galileo 2 insides for pushing filament. Development…
UPDATE (7/11/2025): I have uploaded my filament_sensors.cfg and a text file of the same macros. My macros are set up for use with an EBB36 over CAN. If you do not use CAN bus, be sure to edit the macros to suit your machine. UPDATE…
This is a mod to use a switch as a filament runout sensor on WristWatch. BOM: 1 x Omron D2F 1 x 5.5mm Ball Bearing1 x Omron D2F 2 x M2x10 Self-tapping Screw Wires You will need the other parts to finish the assembly from:…
here is the WristWatch BMG extruder but with Sherpa Holes mostly everything's unchanged the original repo: https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_Extruder_BMG
Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…
Prusa's timekeepers contest [ https://www.prusaprinters.org/contest/11-timekeepers ] and a little extra time off due to Memorial Day [ https://en.wikipedia.org/wiki/Memorial_Day ] presented an opportunity to revisit my sundial wristwatch.…
This simple printable elegantly displays your wristwatches. The stand features the following: A compliant, flexible band that gently sizes itself to your watch for a secure grip A dovetail link system for linking multiple stands together,…
Changed to fit the Rev 1.4 of the LDO Nitehawk 36 toolhead board. All Credit goes to Hartk for original design.
**New Editions: I redesigned both PG7 left and right side mounts to include an M2 nut for the thread tightener instead of a heat set insert (which kept getting pulled out by the M2 screw due to there not being enough plastic to hold it).…
I took the top half of the dual filament sensor and the bottom half of the original, then combined them for a single filament sensor. After that, I reduced the extra size of the top half which was made larger for aesthetics with the…
Please check the → GitHub page ← for more information about this design before printing. If you appreciate my designs and would like to support my work, you can do so by buying me a coffee. Your support means a lot!…
EBB36 Mounts for my Dragon Burner 8 with WristWatch G2 Extruder
An openScad parametric ronda 517 based wristwatch with 18mm strap, snap on caseback, dial, crown and hands All the needed openScad sources and stl files are present The scipt modules use Round Anything openscad module:…
I have not tested this yet, but i believe it should work without major issues. some things might be remaining.
Overview: This listing will be a compilation for all of my WWG2 mods. As time goes on I may add more here as I see fit. List: Beefy Tension Arm Chamfered Filament Inlet Details: Beefy Tension Arm; I had my arm snap on me one day…
I required a BTT EBB36 mount and strain relief for the Wristwatch BMG Extruder. The original model was used as a base, the Wristwatch Back model was overlayed to find out where the new holes needed to be. Additionally, standoffs were…
EDIT (08/12/2022): Added an improved version of the base with blind hole to facilitate the gluing of the assembly. It holds wristwatches with a wrist circumference of about 22cm without a problem. If you have heavy wristwatches (mine are…
This design came about because while I think that while C Average's Sun Dial Watch is incredibly cool, it is also beyond my skill-level to manufacture. Also, it is designed for a different latitude than that at which I live. So I made…
onewordFOURWORDS' model was close to what I was looking for but was missing a place to hold the piano wire that I use to stiffen up my umbilical bundle. There was no CAD files provided in the original so I had to start from scratch. My…
I wanted to use the Rapidburner on my Voron 2.4 with galileo type extruder, cartographer and EBB36. Features: Wristwatch G2 extruder modified so it matches the shape of the cowl Combined the two hotend mounting plates and slightly…
This is a mod to use a switch as a filament runout sensor on WristWatch for Xol2. BOM: 1 x Omron D2F 1 x 5.5mm Ball Bearing1 x Omron D2F 2 x M2x10 Self-tapping Screw Wires You will need the other parts to finish the assembly from:…
Just as that: a piece to hang your wrist watch. The purpose of this print is to really have something nice that can be used in a daily basis, not something that only looks cool but won't get any more use than a couple times whatsoever. I…
This extruder is a remix of the WristWatch BMG extruder. It fits the Orbiter 2.0 or 2.5 internals. There is a second version of the idler arm that fits a 604ZZ bearing (4x12x4mm) to make the extruder function a little more like the…
Remix with more room for wires and easier screw access for microswitch.
I have only dry tested this with a mock extruder/motor. Feedback is appreciated if you run into issues. Here's a WristWatch G2 filament hub mount I modeled as I plan to be making a PICO MMU soon. I modeled to fit the two sensor version of…
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
How annoying can it be that the band on your wristband of the amazfit constant slips off! Well.........we just fix that! Perhaps it fits other bands?? This is the smallest thing I ever made but it did took some fiddling to create it. The…
A remix of the “Orbiter V2 BTT EBB36 mount” to fit on the Wristwatch dual filament sensor extruder: https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_G2_Dual_Filament_Sensor I don't know if it fits to the Wristwatch…
This is super simple clip for wristwatch to have your RFID tag always with you. Fusion 360 file uses parameters for easy size adjustment. Exports are created for 22mm wide and 3mm thick watch band and 0.75mm thick and 15mm wide circular…
Print with Voron part settings Requires two m3 heatsets for securing the pcb Included some spacers that were helpful to me for fitment
I only added a relief for the Crossbow Filament Cutter. I haven't used it much, but the crossbow does have enough room to cut now.
remix of Nick Exposito's Wrist Watch G2 Filament Runout Sensor to include a 5mm bearing
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
This PCB mount was very close to working, but just was missing the last little bit to make it work well. The cable LDO provides is a bit chonky, so this extends the length of the cable support and better accommodates the overmolded end.…
I recently found an old wristwatch with a broken wristband and I couldn't think of throwing the actually still working watch away because of that. So this is what I did: I got rid of the wristband and the casing of the clockwork I kept…
ATtiny402 Binary Wristwatch A minimal binary wristwatch powered by the ATtiny402. Pressing the left button will make the LEDs light up in BCD digits for a few seconds before automatically turning back off to conserve power. Based off of…
A simple tool to help find a wristwatch's lug width without calipers.
Remix of the Wristwatch BMG Dual Sensor for Orbiter 2 mount spacing from here https://github.com/PrintersForAnts/AntHead/tree/main/UserMods/Wristwatch-BMG
Wir kennen das alle: Man ist auf Reisen und weiß nicht, wie man seine Uhr unterwegs sicher aufbewahren oder transportieren soll. Ich besitze viele Uhren, und diese kleinen Uhrenboxen haben mir ein echtes Kopfzerbrechen erspart. Wenn ich…
Extended the Wristwatch G2 base by 5mm to accommodate the top of the Chaoticlab CNC tap when mounted to Dragon Burner v8 on a Voron 2.4/Trident Intended to be used in conjunction with my Dragon Burner v8 to Chaoticlab CNC Tap model
I printed the pin that is used to close the buckle of the FlikFlak wristwatch of my son. It broke and this repairs it. I print with 100% infill and with 0.08 layer height. I had to slightly increase the temperature to have the filament…
I wanted a knob that it realy is possible to turn. The original knob is more decorative than usefull. Design is also a bit lighter. Printed with the voron recomendation.
The loop holder of my son's wristwatch broke. So I made him a new one. Printed in TPU.
Wristwatch BMG Extruder BTT EBB36 Mount Strain Relief with Spring Steel Clip
Print details: Material: Wood PLA(FlashForge) Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: no Infill: 15% [English] I have several solar-powered wristwatches, but they often run out of battery power. So I made a wristwatch…
Printed but untested, although an iteration on proven and reliable devices. Follow the print instructions from the original original model.
See my other version of this model that includes a bigger-on-the-inside pen cup! I always take my watch off when I'm working for long periods, and then I'm constantly worrying about knocking it off onto the floor. My desk has these nice…
This is a conceptual wristwatch prototype developed as an exploration of minimal design and wearable product proportions. The project focuses on simplifying the watch form while maintaining clarity and usability.
Nitehawk-36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger w/Tap Clearance for the Optotap PCB is tight but available 3 Points of attachment to the toolhead Designed to work with the stock Stealthchanger backplate Printed Parts…
Adapter plate/mount to install the Creality "Unicorn" K2 Plus quick-swap hotend on a Reaper Toolhead running the G2SA WW OrbPattern hotend and a Wristwatch BMG extruder, including a mod so the tensioner spring knob doesn't interfere with…
The holder holds up to 5 watches, and you can also hide a few bucks for beer from your wife inside.
WARNING - UNTESTED This adapter is designed around the stock toolhead of the Encore 3D printer. It is intended to facilitate the use of a Wristwatch as a Direct Drive extruder, without sacrificing on build volume or altering a stock part.…
You need 6 key pins 2mm x 20mm. I printed in Prusament PC-Blend.
◼ Archetype Wristwatch BMG flat extruder block (Experimental) is a lighter, flat version of the Wristwatch BMG extruder block with modified mounting points to better fit the Archetype toolhead. Designed for use with the Archetype…
3D-printed watch holder designed to clip directly onto the edge of an open drawer or panel. It allows you to display your watch and keep it within easy reach, letting the strap hang down naturally and neatly.
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
This is a conceptual wristwatch prototype developed as an exploration of minimal design and wearable product proportions. The project focuses on simplifying the watch form while maintaining clarity and usability.
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
onewordFOURWORDS' model was close to what I was looking for but was missing a place to hold the piano wire that I use to stiffen up my umbilical bundle. There was no CAD files provided in the original so I had to start from scratch. My…
This offering includes all parts of the watch except for the movement and a few essential external components. The focus is on providing a comprehensive set of 3D-printable elements that, when assembled with a few additional purchased…
