1 / 2
EBB36 Gen2 - WristWatch G2 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EBB36 Gen2 mounting plate for the WristWatch G2 extruder.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 90
- Makes
- 1
- Views
- 383
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
onewordFOURWORDS' model was close to what I was looking for but was missing a place to hold the piano wire that I use to stiffen up my umbilical bundle. There was no CAD files provided in the original so I had to start from scratch. My design is heavily inspired by the original, but greatly simplified down to just the bare necessities.
The hole in the top fits a 0.8mm piano wire. The board and the mount itself are both secured with two M3 SHCS each. No heatsets are needed.
I have included the original FreeCAD file and a STEP file as well.