EBB36 Gen2 - WristWatch G2 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EBB36 Gen2 mounting plate for the WristWatch G2 extruder.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 383
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
onewordFOURWORDS' model was close to what I was looking for but was missing a place to hold the piano wire that I use to stiffen up my umbilical bundle. There was no CAD files provided in the original so I had to start from scratch. My design is heavily inspired by the original, but greatly simplified down to just the bare necessities.
The hole in the top fits a 0.8mm piano wire. The board and the mount itself are both secured with two M3 SHCS each. No heatsets are needed.
I have included the original FreeCAD file and a STEP file as well.