72 models
Do you need a clip that's not only reusable but also better than the original onces? Well then this is perfect for you, this reusable/adjustable wristband clip. it's designed to be easy to use and comfortable to wear! How to use: To use…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Da ich keinen Ladeständer für eine Huawei watch GT 2 gefunden habe welcher mir gefallen hat und auch ein "geschlossenes Metallarmband" unterstützt, die meisten sind für die normal enthaltenen Gummibänder und diese müssen geöffnet sein,…
This is a replacement wristband clip for a music festival / concert wristband. It's modelled after the VELD 2023 ones, though without the inner spikes that prevent it from loosening. A great replacement if your wristband clip breaks or…
Little contrabtion to make the festival bands reusable without damaging them and having them tight and adjustable.
Remixed the Chainmail to a wristband. Insert magnets in the intended openings, diameter 5 mm, two of them should be enough.
A removable clip for festival wristbands in two sizes. Depending on how frayed your wristband is, you might have to scale it a bit. The clips are pretty tight so I used a piece of drinking straw to pull the wristbands through (see second…
My version of Leela's wristband computer with holes for magnets to hold together Used a stack of three 2x1mm neodymium magnets in each hole (24 total holes) Print instructions NEEDS a brim because of very thin bed contact Recommend…
Just print out the two parts and put them together as shown in the cross-section. Keep in mind that you should wear the closure like the orange one shown in the picture. The SolidWorks Files are attached for free customization, as I made…
Since Ava does not sell replacement wristbands for the Ava fertility tracker I created this simple adapter for generic 16mm wristbands. This part is designed to be a very tight fit, since the bottom layer is quite thin to ensure proper…
The simple way to organize and show your festival wristbands. They can mounted on the wall or stands free.
The Mi Band 4 is really a great smartband that does its job well, but two things have always bugged me about it: How short-lived the stock wristband is (same goes for similar replacements), and how often the band accidentally snapped…
Print In Place & Parametric Wristband for your projects by Earthworm Jon Use this design to create and make a print in place wristband to fit your project and wrist! Basic Instructions Open the designs in Fusion 360. Change the width of…
This is my second iteration of a replacement wristband for the above mentioned Casio watches and probably others. In this configuration its not suited for large wrists. The wrist on the Photo has about 20cm circumference and uses the…
Here is a simple replacement clasp for textile bracelets (“festival wristbands”). It can be used to replace broken or non-adjustable closure. I designed for wristbands with a thick fabric, and it sits very tight on those. You can use it…
A replacement Wristband for the Garmin Fenix3 Print Settings Printer: BigBox Rafts: No Supports: No Resolution: 0.2 mm Infill: 35% Notes: Print with Ninjaflex or similar Rotate all parts -90 degree 2 T6 screw driver are needed to replace…
My modification of Michal Fanta's flexible watch strap to fit my sons watch. My model is a 133mm long version for a watch lug of 16mm with a pin diameter of 1.5mm. I've printed it using Fillamentum Flexfill 98A (TPU) to give it some…
Amazfit T-Rex 2 wristband free loop replacement. Print with TPU, full perimeters. Try experimenting without supports. There are two versions of free loop wit inner pin, one with chamfered inner pin for easier printing without supports. If…
Did not want to wait days or weeks for a replacement (Or pay money ;-), I like to pay with time)- so obviously I made it by my self. Printed in TPU
Wristband for Xiaomi MiBand 3-6 and YubiKey USB-A . Use TPU filament with 100% infill, without supports. I think the buckle is most problematic spot. I afraid it might failure after a while, as it gets high impact on open-close - the…
I made this holder to store my different wristbands, you have a fake smartwatch that is modeled after the Amazfit Bip 5 (the smartwatch i use) where you can clip in the bands and then place them on the stand, it's better than toss them on…
If you know, you know. This wristband is inspired by the iconic phrase from Project Hail Mary by Andy Weir - a subtle but unmistakable nod to Rocky and galactic friendship done right. Features: Clean lettering Minimal support required…
Model supports multicolor printing on single material FDM printers by changing filament at specific layers for design effects. I printed the examples in the photos by manually pausing and changing filaments, M600 gcode operations should…
Wristband wich can be filled with Hands sanitizer. This way you do not need to carry a big container with you. Video showing how it works: https://drive.google.com/open?id=1_asaRmndkH3WhQSyymzzIkhGTi9KL65z Print instructions No supports…
Motivation The first thing you usually lose from a watches (leather) wristband are the retaining straps. This requires replacement of the wristband even though the rest of the wristband is still in fairly good condition. This simple print…
printed it without supports with PETG. some of them need some afterwork with a knife to get the edges clean.
design: designed to hold apple watch wristbands. I have tested the “vanilla”, the velcro and the milanesse so far and they all fit. multiple holders can be placed right next to each other. you might want to use double sided tape to…
My very first model designed, created and built. Wanted something to be keep previous years Download Festival wristbands in one place and on display. Simple print, no support needed (nor MMU or AMS). Either set the change over of colours…
The attached STL is suitable for a small watch accepting 14mm wrist straps, to be worn by a 6-7 year old girl, for a strap lug between 1.2 and 1.6mm thickness. I had good results with Filaflex 82A, but any flexible filament with roughly…
Logo from SVGFiles MIT Licence: https://www.svgrepo.com/svg/442994/brand-cthulhu A simple add-on for my wristband designed together with MaryGold. What you need is some leather, a tiny bit of Velcro fastener and some knobs, a few…
After wearing some wristbands from Wacken Openair and Summer Breeze for more than 10 years on my arm I was looking for a place to put them on display and created this wall mounted hand. I found it only fitting to also put the names of…
Magnetic bracelet to hold magnetic objects like bits, screws... . The strap opening is 24mm wide and 3mm thick, so you can also attach the magnet holder to a backpack. There are two files, one for a rectangular neodymium magnet 20x10x3…
This is the second version I drew up after not being able to get hold of the same remote control unit. I have two, one for the trading card dispenser activation and the second, for R5's ‘Bad Motivator’ activation. There is a requirement…
EN : Bracelet based on the design by “ sagethemaker ,” modified for my own use. Material : TPU (Filaflex 70A) Layer thickness : 0.2 mm Supports : none WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW DE : Armband, basierend auf dem Werk…
This is an attachment for your Apple Watch 22 wristband for safely transporting a Micro SD card. Put the Micro SD card into the little compartment. Then slide the attachment over a 22 mm Apple Watch wristband with the compartment on the…
Wristband/Armband it's made for: https://www.amazon.com/dp/B098RMQNMY?psc=1&ref=ppx_yo2ov_dt_b_product_details I cut and sewed to make the armband length to fit my wrist. Armband/Forearm/Wrist whichever you prefer.
A handy wristband designed to hold a Kingston flash drive and keep it conveniently available Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.3mm Infill: 5% Filament: SainSmart TPU/TPE (98A Shore…
Wristband connectors are mostly very flimsy. Therefore I created this small replacement part for a rubber wrist band. In my case it's for a smart watch by Willful. Best printed in TPU or another flexible filament. Brim can be used but is…
Model supports multicolor printing on single material FDM printers by changing filament at specific layers for design effects. I printed the examples in the photos by manually pausing and changing filaments, M600 gcode operations should…
Small magnetic wristband designed to hold small screws, nuts and bolts, etc. Use 8mm x 3mm neodymium magnets. This version can be used with a 20mm velcro cable tie. The strap slot is 22mm x 4mm so you can use with something else you have…
The Easy Access Adjustable Drill Bit Wristband is designed for convenience and efficiency in mind, this wristband is a must-have tool for every handyman. It features an adjustable strap to fit any wrist size comfortably and securely. The…
My rubber that holds the armband on my watch broke, designed this, printed with PLA. Edit, PLA version hold for about 10month using it more or less 24/7. Printed next version i PETG, so far so good!
This is version 1, I drew up to hold my remote control unit for R5's ‘Bad Motivator’ activation. There is a requirement for an M3 brass knurled threaded insert. This is to secure the front panel in place. Blog link here: remote…
I liked the idea and made it different. Added my own ufo and alien head, recessed the eyes and no outline for the face since black tpu is used as a base. need to get some glow tpu to make this really pop. used black, orange (translucent…
To change colors, in Cura: Extensions -> Post Processing -> Modify G-Code Add a script -> Pause at height Add 3 times Change at layer height 12, 14, and 16 (5, 7, and 9 for thinner V2) Change retraction to 25mm Tips: Print several as one…
This is compatible with the 22mm quickfit band for the Garmin Fenix Pro. It will also fit other models 22mm size.
I needed a magnetic wristband and found the great model from @KevinChagneau_651382. Unfortunately I had none of the two magnet types but lots of rounc 6x3mm magnets. So I used FreeCAD to modify his model to accomodate six of those small…
Printed with TPE 70A, and this works perfektly for us. Test prints with TPE 80A felt slightly uncomfortable, did not try printing with softer material. All parts were printed without supports. However, the wristband strap has a small 45°…
Single-Left-Hand Joy-Con Adapter (+ Status Light, Wristband and Tactile Marking) This is an adaptation to the design of Single hand Joy-Con adapter (Left) by Vexelius, so, thanks for this! For a group project at university, we adapted the…
Model supports multicolor printing on single material FDM printers by changing filament at specific layers for design effects. I printed the examples in the photos by manually pausing and changing filaments, M600 gcode operations should…
Fixes the cheap wristband included with many Canon PowerShot cameras
This is an adaptation to the design of One-Handed Joycon Controller Adapter (Right Hand version) by Richie Rein, which is also a remix of the Single hand Joy-Con adapter (Right) by Vexelius. Thanks to both of you for your work! For a…
This is a powerfu two part clip designed for housing a round 9mm x 1.5mm magnet. It snaps into place and prevents the shear force to open the connector. You need to open it by lifting one part. Print with a small support for a hook. You…
I added a rack so that additional watchbands can be stored next to the watch and a solid block as a stand
This remix features a redesigned fastening mechanism to ensure a secure fit for different straps.
This wristband extension is designed for Mares (and other models I'm sure) dive computers, adding 6 extra holes to easily adjust your strap when wearing a drysuit. It ensures a more secure fit of your dive computer around your wrist, even…
I've had a Sony SmartBand2 for 1.5 years now and the original wristband broke a while ago. I didn't want to buy replacement wristband (don't even know if they can be purchased), but decided to see if I could 3D print a replacement that's…
The old rubber part was broken so I tried to replace. I used PLA, an print with 0.12 layers
Description: Created this custom-designed clip to convert a Clover Universal Counter (also known as the Clover Mini Knitting Counter or "Kacha-Kacha") into a wearable wristband counter. According to this user review on Amazon , the…
FitBit ace 3, pièce de remplacement bracelet - Fitbit Ace 3, replacement wristband part
This is an adapter to use 22mm velcro watchbands with the Pebble Time 2 smartwatch . It was tested with the Garmin Ultrafit nylon watchband but most likely also works with other ~2mm thick 22mm straps and other with watches that use 22mm…
A very simple model to replace a broken wristband connector. Hole for the pin is quite skinny, but it's possible to insert the spring-loaded pin.
This is a storage solution to rubber wristbands. I've never liked keeping these wristbands since they weren't that comfy, I never knew where to put them, and sometimes it's a pain to put them on take them off without breaking them. So, I…
I designed this some years ago in blender, looking forward to redesign it in freecad and make it fully paramteric - sorry this old version isnt. This version also has a special nib for the kind of wristbands I use. This will be removed or…
See the original model's description for more details + instructions. The original author has tons of great info over there. This is remixed to fit 26mm wide "sports" bands, like the ones for Garmin GPS watches.
I based off the dark Lord weapons from Alan Becker
I joined the top and middle sections to create a bottom edge; this way, you don't see any gaps when you hang it up.
This is an adaptation to the design of One-Handed Joycon Controller Adapter (Right Hand version) by Richie Rein, which is also a remix of the Single hand Joy-Con adapter (Right) by Vexelius. Thanks to both of you for your work! For a…
Single-Left-Hand Joy-Con Adapter (+ Status Light, Wristband and Tactile Marking) This is an adaptation to the design of Single hand Joy-Con adapter (Left) by Vexelius, so, thanks for this! For a group project at university, we adapted the…
I designed this some years ago in blender, looking forward to redesign it in freecad and make it fully paramteric - sorry this old version isnt. This version also has a special nib for the kind of wristbands I use. This will be removed or…
This is an attachment for your Apple Watch 22 wristband for safely transporting a Micro SD card. Put the Micro SD card into the little compartment. Then slide the attachment over a 22 mm Apple Watch wristband with the compartment on the…
Introducing the Flexible Scalemail Wristband, a unique fashion accessory designed for 3D printing enthusiasts. Crafted with a flexible scale pattern, this bracelet delivers comfort and style in one piece. Made from durable PLA, this model…
This is a replacement wristband clip for a music festival / concert wristband. It's modelled after the VELD 2023 ones, though without the inner spikes that prevent it from loosening. A great replacement if your wristband clip breaks or…
![Remote control wristband holder [2 button] V1](https://media.printables.com/media/prints/281613/images/2493227_d6a4ce27-ef7c-4b92-a526-9c7633aa57d9/wrist-comms-v1.jpg)
