Sanitizer Wristband
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wristband wich can be filled with Hands sanitizer. This way you do not need to carry a big container with you.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 899
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Wristband wich can be filled with Hands sanitizer. This way you do not need to carry a big container with you.
Video showing how it works: https://drive.google.com/open?id=1_asaRmndkH3WhQSyymzzIkhGTi9KL65z
Print instructions
No supports needed at all.
Pin and caps are PLA, I recommend 0.2mm layer height and 10-20% infill.
For the Wristband some considerations are needed:
Material is TPU (any flex filament is ok)
Perimeters: 1
Infill: 0%
Top solid layers: 3 BUT you need to add a modifier on each container's bottom and set 1 bottom solid layer and 1 top solid layer. If you dont do this, pushing them will be harder than recommended.
Bottom solid layers: 2
To assemble all the parts you just need to put a little pressure on them. NO GLUE needed at all.