Sanitizer Wristband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wristband wich can be filled with Hands sanitizer. This way you do not need to carry a big container with you.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Wristband wich can be filled with Hands sanitizer. This way you do not need to carry a big container with you.
Video showing how it works: https://drive.google.com/open?id=1_asaRmndkH3WhQSyymzzIkhGTi9KL65z
Print instructions
No supports needed at all.
Pin and caps are PLA, I recommend 0.2mm layer height and 10-20% infill.
For the Wristband some considerations are needed:
Material is TPU (any flex filament is ok)
Perimeters: 1
Infill: 0%
Top solid layers: 3 BUT you need to add a modifier on each container's bottom and set 1 bottom solid layer and 1 top solid layer. If you dont do this, pushing them will be harder than recommended.
Bottom solid layers: 2
To assemble all the parts you just need to put a little pressure on them. NO GLUE needed at all.