Counting matching models…
My daughter wanted some hand sanitizer for her 1:12 dolls, so I made her it. Printed in white PLA at 0.12mm layer height. For me, it was hard to get off of the “BuildTak” sheet that came with my Creality Ender 3, so I printed with a raft.…
Automatic hand sanitizer pumps cost upwards of $50 USD. The design consists of 10 different parts that snap together with the snap-fit connectors I designed. The snap-fit connector (iterated way too many times) allow for the parts to fit…
Consumer bottles of liquid soap and hand sanitizer are designed to dispense too much ! For liquid soap you only need a little bit for it to do its job (break the surface tension of water) and for hand sanitizer you only need enough to…
[8/6/20 V2 hinge pin uploaded - now contoured and sized to sit flush against the main body for a much nicer look. I did design a variant that had a much less bulky body, but it ended up using practically the same amount of filament due to…
I wanted something more durable than the cheap rubbery cases you can buy at the store. You will need a metal ring to attach to your keychain or backpack. Printed with tree supports for the windows.
S.A.F.E. Clip: Sanitizer Accessory for Fast Engagement with MOLLE Clip What it does and what problem it solves: The MOLLE Bath & Body Works Hand Sanitizer Holder is a robust, compact device engineered to securely encase a standard Bath &…
Touchland Hand Sanitizer Holder Keep your sanitizer close and easy to grab! This lightweight Touchland holder is designed for everyday carry and quick printing. Why you’ll like it Super easy to print – no tricky geometry or supports…
Clips your sanitizer to various thing like key rings or backpack loops etc. Print instructions 100% infill - .10mm or .20mm - 3 Perimeter walls - Supports Everywhere
I found the perfect hand sanitizer bottle I wanted to keep with me while I'm out! Sadly, it had no way of being hung from my bag securely. Drawing inspiration from the expensive holders for the Bath and Body Works sanitizer keychains I…
After COVID-19 hit the world, I started having a small bottle of hand sanitizer in my car. Between the two cup holders there is a small spot that is the perfect for a bottle, but it was slipping around, if I didn't have two cups or…
This holder fits the standard 12oz Equate Hand Sanitizer bottles from Walmart. This bottle will not collect water or debris as It is designed for outdoor use. We needed something simple to mount to the side of our chicken coop. Simple…
A simple pocket clip for Bath & Body Works' PocketBac hand sanitizers. Uses a piece of 1.75mm filament for added strength (optional). Post-Printing Cut a small length of 1.75mm filament, long enough to comfortable work with -- this can be…
Made for bath and body works pocketbac
Drip catcher for wall-mounted automatic hand sanitizer dispensers. Print instructions Category: Household Summary Drip catcher for wall-mounted automatic hand sanitizer dispensers. Print Settings Printer Brand: Creality Printer: Ender 5…
Thread adapter to use dispenser from sterillium 1L bottle on a Jack Daniel's 0.7L bottle Hint: If u use the Fusion 360 part and export you have to upscale 103% 103% and 180% in X Y and Z, since I did not find any matching thread in F360,…
It is a stylish bracelet, which can be filled with a hand sanitizer liquid and sprayed directly on the palm. Wearable sanitizer makes it simpler to stay safe during the pandemic. Print instructions Rafts: No Supports: Yes Infill: 0%…
Wristband wich can be filled with Hands sanitizer. This way you do not need to carry a big container with you. Video showing how it works: https://drive.google.com/open?id=1_asaRmndkH3WhQSyymzzIkhGTi9KL65z Print instructions No supports…
Ok so, I keep forgetting to use the hand sanitizer I leave in the car so I thought Id do something to attach it to the visor (and then decided to over complicate it). It uses a 8mm x 3mm magnet and a M5 nut as hardware in addition to a…
Usually there is no shelf near entrance doors, this is a possible solution. This is a simple holder for hand sanitizer to instal near entry doors. The idea came to help prevent the Corona Virus pandemic. I added hardware holes, but double…
This is a two part print . screw or double sided tape to wall. A E275-3-S UVC LED Chip on a board with a 3W LED driver to sanitize the toothbrushes inside prior to use.…
2oz sanitizer holder for clipping onto your belt or waist. Slight tight fit with the random 2oz bottle I have and the generic Target up&up brand. Can be pulled out with one hand if you press on the top of the clip area and the bottom of…
Useful? Whimsical? This 3-D print is a belt clip to keep your sanitizer bottle handy. The easy-to-print design demonstrates some handy techniques: a snap fastening of separately printed parts, and post-print thermoforming. Print…
I wanted a wall mount for my desderman® handsanitizer dispenser from Schülke , so i designed one in Fusion 360 and printed it with Bambu PLA CF in black but any other material should be fine. It is for the 500ml dispenser bottle, if you…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 1h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 5 perimeters Post processing instructions: Clean stringing, install in…
🧴✨ Premium TPU Hand Sanitizer Sleeve – Protect Your Bottle in Style! Never Deal With a Broken Pump Again Transform your boring hand sanitizer bottle into a protected, personalized essential that actually survives being tossed in your bag,…
Do you get stuck outside or inside thinking that your hands or the surface that you touched are dirty! Here is a portable solution!!! You can carry a small portion of Soap, Hand Sanitizer, and Lotion ALL IN ONE! Handy-dandy bracelet with…
Designed to fit a 65mm diameter pressurized foam hand disinfectant canister meant for hospital or home use. The nozzle sticks out just far enough to allow the cap to be re-administered. On the back there are two grooves for 75mm x 20mm…
Hang your hand sanitizing gel bottle from your Bag. Prints flat in flexible Filament (TPU). Lace it around your bottle. Print in Flexible Filament. Or cut out of thin (1mm) easily bendable material. (see PDF) Take of the print bed and…
this device makes it possible to automate the pressing of antiseptic gels, there is a proximity sensor and an arduino card which, when it detects the hand, activates the servomotor that presses the gel. FR TUTO :…
Modular Gloves, Hand and Skin Sanitizer Holder
Designed for 0.2 layer height, with a 0.4 nozzle. You will need some superglue for the top pieces. This was the best way I could think to do it on a single extruder printer. The middle latches securely into place though. There are a…
Wall mount for the rectangular shaped foaming hand sanitizer. Printing Notes: I printed this with Inland Marble PLA. I started with 0.4mm nozzle but had some clogging issues. Moved to 0.6 and worked well. No supports needed if you print…
Those tiny sanitizer containers always falling over when you put them on a hard surface? Well here is the solution, this simple sanitizer holder can hold up to 5 hand sanitizer containers. Suitable For Sanitizer Containers 40x27 mm…
I got tired of this little bottle of hand sanitizer tipping over and leaking, so I made a thing to hold it upright. It fits the cup holder in my 2019 Ford Mustang. It probably fits lots of cup holders. It has a diameter of 68.3mm at the…
Helps prevent spread of Corona virus. Print it on glass so it has a smooth finish so you can write important things on it (shopping list and other things), the clip is to hold a phone up. There is a rectangle with a cylinder which is used…
This is a germx holder. Category: Office
The holder hooks into a belt and holds a 4 oz(or equivalent) container of hand sanitizer Print instructions I printed the main holder verticallyand the cap horizontally.
Keychain holder for Zuru Bactive 1.6 fl oz hand sanitizer sold at Target: https://www.target.com/p/zuru-bactive-hand-sanitizer-1-6-fl-oz/-/A-80211396 It's a simple ellipse with internal dimensions of 46.05mm x26.95mm with a wall thickness…
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 2 - 3 hours Slicer settings: 0.3mm layer height, 4 perimeters, supports everywhere Post processing instructions: Clean from stringing, attach to the…
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
A simple holder for a small bottle of sanitizer. I will mount this to the back of the centre console for the rear seat passengers. 0.3mm, PETG, Sovol SV01
Wall-Mounted Sanitizer Bottle Holder Keep clean hands just a reach away— even in the trash room. This minimalist holder secures a standard pump-top sanitizing-liquid bottle to any flat wall surface with just three screws. Despite its slim…
Worked on several kinds with ~8mm tubes.
wos designed to be zip tied to a fence there for the 8 holes .F3D files added ig you need to change the model
Automatic hand sanitizer using a 9 gram servo, ultrasonic proximity sensor and arduino nano. The mechanism is very simple using only a string to push down on the cap of the hand sanitizer. This is still work in progress. I will be…
Just a simple holder for my Hand Sanitizer to be next to the light switch. :) Should be easily printable in vertical orientation without any supports.. but probably best to use a brim.
This is a simple holder for small hand sanitizer bottles with a loop to connect a carabiner. I have included a few different sizes.
This model is a single-piece holder designed to keep standard hand sanitizer bottles organized and stable. The geometry is optimized for No Support Needed printing. The wide base helps reduce tipping. Suitable for workshop, bathroom,…
The local Boys & Girls Club asked me to fix one of their automatic hand sanitizers. So I modeled this. It mounts to the post firmly and accepts all the bolts snugly. The example pictured has the BGC logo, but the stl is blank for your own…
This was my first attempt editing an existing model. Tested with dollar hand sanitizer from travel section at Target. Not clean or fancy but works.
This wall-mounted shelf is designed specifically for the Philips Sonicare UV sanitizing and charging unit. It allows you to place the device conveniently on the wall, saving valuable counter space in your bathroom while keeping the unit…
Overview BottleKeep is a compact, knit-style travel bottle sleeve designed to keep 1oz bottles close at hand and protected throughout the day. It’s made for everyday carry — clipped to a bag, tucked into a workspace, or set on a desk…
We found an inexpensive automatic hand sanitizer dispenser for sale at a local store and I wanted to be able to wall mount it for convenience. This first print is in PLA+, but I'll likely print a replacement in PETG because garages in the…
simple 12mm thick spacer for wall mounting hand sanitizer units so you can still access the buttons for bottle replacement. Spaces the back side of the sanitizer off the wall when you have have trim or door frames on either/both sides.…
Wife asked me to make these and I was just happy she's moved on from scensy wax melters so I just knocked these out real quick so maybe you wouldn't have to. godspeed to the rest of the husbands out there.
The design was made to fit the Germ-X 12 oz hand pump:…
Two print profiles, one for hand soap and hand sanitizer, and one for soap only. Feedback is always appreciated, enjoy this print!
Sanitize those fingies, this gridfinity bin is a simple 1x2 that hold the "B-Pure" hand sanitizer bottle. This should fit any bottle with the following dimensions: 58mm wide and 18mm thick.
I wanted a hold for the soap and sanitizer for Skadis. By chance it fits exactly in the grid of Skadis so you can mount several (tested for two) together. Printed in ASA, you can snap it in like the original. I recommend printing it…
Made for a 2oz bottle of hand sanitizer (dimensions ~ 46mm × 26mm × 70mm). Use a length of paracord, (short) to hang from a bag or (long) as a lanyard. Holes are a little too small for use with a carabiner, sorry; maybe another variant…
simple 12mm thick spacer for wall mounting hand sanitizer units so you can still access the buttons for bottle replacement. Spaces the back side of the sanitizer off the wall when you have have trim or door frames on either/both sides.…
This wall-mounted shelf is designed specifically for the Philips Sonicare UV sanitizing and charging unit. It allows you to place the device conveniently on the wall, saving valuable counter space in your bathroom while keeping the unit…
This model is a single-piece holder designed to keep standard hand sanitizer bottles organized and stable. The geometry is optimized for No Support Needed printing. The wide base helps reduce tipping. Suitable for workshop, bathroom,…
Overview BottleKeep is a compact, knit-style travel bottle sleeve designed to keep 1oz bottles close at hand and protected throughout the day. It’s made for everyday carry — clipped to a bag, tucked into a workspace, or set on a desk…
Sanitize those fingies, this gridfinity bin is a simple 1x2 that hold the "B-Pure" hand sanitizer bottle. This should fit any bottle with the following dimensions: 58mm wide and 18mm thick.
This is an updated anti-theft version of the wall mount for my "Equate 34oz or Target 32oz Hand Sanitizer holder - Wall Mount Remix" which you can find at the link below: https://www.thingiverse.com/thing:4213018/files The bottle holder…
Update 4/10/2020: There is a new and improved version at the link below. It uses a small pen spring and a penny (or other small coin) to unlock it: https://www.thingiverse.com/thing:4276185 I will not be updating this design unless…
This is just a quick remix of my 32 Oz Hand Sanitizer Holder for Haworth Compose Cubicles (which is pictured to give an idea of what the completed holder looks like). This however is designed to be wall mounted. There are 2 versions of…
Update 3-10-2020: If you want a wall mount version, check out the remix here: https://www.thingiverse.com/thing:4213018 This is a remix of the original version of the "Equate 34oz or Target 32oz Hand Sanitizer holder for Haworth Compose…
Update 3-10-2020: If you want a wall mount version, check out the remix here: https://www.thingiverse.com/thing:4213018 I recommend using the remix'ed version - https://www.thingiverse.com/thing:4172411 - which is stronger and utilizes m3…
