Foam Hand Sanitizer Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.15 – €9.96 net (excluding VAT)
For file: Ender 3 - 1.00mm Nozzle / ce3_disin_p10mm_nozzle.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.06 excluding VAT (range midpoint).
- Weight reported by the author
- 175 g
- Print time reported by the author
- 6.66 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed to fit a 65mm diameter pressurized foam hand disinfectant canister meant for hospital or home use.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- BSD License
Designed to fit a 65mm diameter pressurized foam hand disinfectant canister meant for hospital or home use. The nozzle sticks out just far enough to allow the cap to be re-administered. On the back there are two grooves for 75mm x 20mm Command strips.
Stay safe out there, friends. :)
If you want one in a different diameter I can upload one.
(Mirrored from Thingiverse)
Print instructions
No supports needed
No specific material
Print at whatever layer height you can. Can be used with thicker nozzles too (I used a 1mm nozzle for fast printing).
The Ender 3 is pretty popular so I included a 0.4mm print file. A 1.0mm print file is available in the User Print section.