Foam Hand Sanitizer Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit a 65mm diameter pressurized foam hand disinfectant canister meant for hospital or home use.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- BSD License
Designed to fit a 65mm diameter pressurized foam hand disinfectant canister meant for hospital or home use. The nozzle sticks out just far enough to allow the cap to be re-administered. On the back there are two grooves for 75mm x 20mm Command strips.
Stay safe out there, friends. :)
If you want one in a different diameter I can upload one.
(Mirrored from Thingiverse)
Print instructions
No supports needed
No specific material
Print at whatever layer height you can. Can be used with thicker nozzles too (I used a 1mm nozzle for fast printing).
The Ender 3 is pretty popular so I included a 0.4mm print file. A 1.0mm print file is available in the User Print section.