SRT Gearbox V9-V10 Frankenstein

WITH THE NEW v1.3 PCB FOR THE V10, EVERYTHING IS FIX IN TERM OF LATENCY, GET THE KIT FROM INDUSTRY&CNC AND EVERYTHING SHOULD WORK

The V10 gearbox is a huge step ahead from the V9.1 in term of smoothness and simplicity of fabrication and assembly, unfortunately some user, like me, experienced latency in the H pattern. This is my fix for the small latency of the V10 SRT gearbox, you simply swap the brain of the V9/V9.1 into the V10 (Frankenstein style :P). You can use the PCB from your older V9 or buy a new one from INDUSTRY&CNC since the hall sensor position is exactly the same

1. Body 2, Turn and PCB cover has been moded by myself
2. The hall sensor soldering guide is from the V9.1 files on Lebois website
3. Since I worked on this before Lebois December 2024 update I added the old revision of No turn (November) I did not test Lebois December 2024 version of No Turn and I'm not sure it will work
4. You will also need the arduino code (RC14) for the V9.1
5. Other part for the build can be found on Lebois website

I highly suggest to watch Lebois video about the V9.1 for the assembly and programming of the PCB and assembly of TURN that can be found here : V9.1 assembly guide

You will need 8x2mm round magnets (2x) M6x10 set screw (1x) and M4x8 DIN910(2x)

My mod works with button plate mod but is not compatible with other V10 mod like joystick mod or eclutch mod, I recommend to download the servo delete mod from my profile for better aesthetic.  

As shown in the pictures, you will have to shorten the 6 pins on the top of the Arduino for PCB cover clearance, no need to cut them completely

I also had my step files of my parts, feel free to correct, continue or adapt my work for your needs. Take notes that, as shown in the pictures, there is 2 version of body 2, one with side mount holes at 40mm distance like the original and one with the side mount holes at 38.1mm (1.5in) to match imperial extrusion (Advanced Sim Racing chassis)