1 / 9
K1 K1C K1 Max -Space Pi and K1 Series Door Handle Set — zdjęcie 1
1 / 9

K1 K1C K1 Max -Space Pi and K1 Series Door Handle Set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set of Matching Handles for the Creality K1 series and as a Bonus The Space Pi Filament drier

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
304
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

1 Handle for the K1 Series (including K1C K1 Max)
1 Handle for the Space Pi Filament Drier 
I printed in Pop Pink ASA but something like PETG or better would work as well, it must be printed in a slightly heat resistant material on the filament drier because of ambient heat
 

3 Walls
10% Infill

0.2mm Layer height
no Supports on the K1C Door Handle
I used support on the Space Pi handle(there is a possibility you will get good results without it)
Let me know 

I used the original hardware for both the K1C door and the filament drier hatch, 

Please post makes and suggestions for improvement
 

Tagi