Water nozzle - "Gardena" compatible, little water - high pressure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic design, internal "jet" geometry It directly plugs to Gardena like connectors with very little water…
- Ocena
- 5 / 5
- Polubienia
- 139
- Pobrania
- 836
- Wydruki
- 7
- Wyświetlenia
- 4040
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Minimalistic design, internal "jet" geometry
It directly plugs to Gardena like connectors with very little water throughput but quite high pressure. I use it to clean my bicycle after riding in the forest....
The wide part in the front improves ease of print as well as provides a better grip to remove from connector. You can add an O-ring for better sealing. The groove for the O-ring has champers to reduce overhang.
No supports required when printed with front facing build plate, used 4g of material with 20% infill an 3 perimeters.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.2
Infill:
20
Filament:
Das filament PETG Red
Notes:
Well, the printer was an Anet A8 to begin with...
Only steppers, Mainboard, display and lead screws are still from original kit ;-)
Category: Sport & Outdoors