MOZA HGP Shifter sequential mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
If you want to convert your Moza HGP shifter from H-pattern to sequential this is an easy way.
Also easy to remove when you want to cruise around with normal H-shifter, just lift off.
Requires my mounting bracket, to get the bracket extensions to sit correctly.
Print the both halves of bracket extension (in PLA/PETG)
Then print two grommets (in TPU! Arched side upwards). Print settings: one vertical shell, gyroid infill with some infill ratio that makes squish just perfect (I used 10%, try different to get the correct feeling).
When done, put the two halves on shifter. Then put grommets so that the steps align in slot, like this:
Other MOZA prints?
Check out my full collection of other printables for MOZA eco system. There is a bunch of various other things of all kinds:
https://www.printables.com/@BentDerailleur/collections/1579905
Happy driving!
