Case for Arylic Up2Stream Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is intended to be used with the Arylic Up2Stream Pro V3 + V4 (Multiroom Audio Receiver Board). Cover and…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 817
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This case is intended to be used with the Arylic Up2Stream Pro V3 + V4 (Multiroom Audio Receiver Board). Cover and base are held together by four M3x16 hex-screws (self tapping, no threaded inserts required). The board is sitting in between both parts. The IR-Receiver and the LEDs are accessible through small holes on the side.
The case features decor-elements, which are seperated from the two main bodies. You can use them to apply a custom (open) infill pattern/color/material to the case. Combine the parts in your slicer or use the included 3mf-file (setup for a Prusa MK4 in PrusaSlicer with mostly default settings). For the *_decor.stl chose no top and bottom layers.
Print Settings
Rafts: No
Supports: Yes
Resolution: 0.2 mm
Infill: 15%
Filament Material: PLA
Notes:
If available, use organic supports (e.g. in PrusaSlicer) to support the bridges of the holes.