Case for Arylic Up2Stream Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case is intended to be used with the Arylic Up2Stream Pro V3 + V4 (Multiroom Audio Receiver Board). Cover and…
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 138
- Makes
- 1
- Views
- 817
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This case is intended to be used with the Arylic Up2Stream Pro V3 + V4 (Multiroom Audio Receiver Board). Cover and base are held together by four M3x16 hex-screws (self tapping, no threaded inserts required). The board is sitting in between both parts. The IR-Receiver and the LEDs are accessible through small holes on the side.
The case features decor-elements, which are seperated from the two main bodies. You can use them to apply a custom (open) infill pattern/color/material to the case. Combine the parts in your slicer or use the included 3mf-file (setup for a Prusa MK4 in PrusaSlicer with mostly default settings). For the *_decor.stl chose no top and bottom layers.
Print Settings
Rafts: No
Supports: Yes
Resolution: 0.2 mm
Infill: 15%
Filament Material: PLA
Notes:
If available, use organic supports (e.g. in PrusaSlicer) to support the bridges of the holes.