Counting matching models…
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
Small stand with upward tilt to help with projection! (~8.5 degrees) Total height with Sonos beam on board is 105mm. ~20mm gap height in the rear. ~38mm gap height in the front.
Attach a Sonos Roam speaker to a wall (or golf cart) with a powerful bar magnet. Recommended Material I recommend printing with a heat-resistant material, like PETG , if you intend to store it in warm places, like a car on a sunny day.…
For music lovers on the go - a perfect fit for the Sonos Roam portable speaker - this custom mount lets you attach your speaker to the “bottle cage” of your bicycle. This is a remix of the great design Sonos Roam Bicycle “Bottle Cage”…
Use this faceplate for the Sonos One wall mount linked below. https://www.printables.com/model/1195170-sonos-one-outlet-mount
Needed a wall mount for our Sonos Arc soundbar. Didn't want to buy one (and wait for delivery) so I spent 30 minutes designing one. My daughter wanted something at the time, so the design is a little rough since she's … persistent. But it…
This is a remix of the design from Weshape. I removed 6mm from the back side to place the speaker closer to the wall. It works just as well with the 2nd set of interlocking tabs removed but makes it shallower to the wall. Printed up with…
Designed to mount a Sonos Era 300 smart speaker to a pole securely. Cable management well included. Designed for a 38.5mm pole, or 1.5 inches. You'll need 2 M5 X25 screws, per speaker, to mount the speaker to the plate. And of course, a…
Quick and dirty stand for the Sonos Play One to mount on a Vesa mount. Note: Speaker is not hard mounted to the mount so is still subject to gravity
I created a simple vertical wall mount for my Sonos Roam to install it in our kitchen. The mount is designed so that a charging cable can also be installed. Printed with Extrudr White NX2 PLA. For the pins you might need to print using a…
So hear me out. I needed a bathroom speaker that is not shit, is Sonos and is not going to break my bank. I got refurbished Ray for measly 120€, but I couldn’t stand how much space does it take. Behold my take on a vertical stand.…
Sonos Roam 2 – Horizontal Wall Mount (3D Printed) Keep your sound crisp, clean, and perfectly positioned with this custom‑designed horizontal wall mount for the Sonos Roam 2 speaker . Built for both style and practicality, this mount…
Corner shelf to SonosOne speaker. Mounted with two screws.
Enhance your audio setup with this custom-designed SONOS ERA 300 wall bracket, enabling a full 360-degree rotation for optimal sound direction. Tailored to the sleek contours of the SONOS ERA 300, this mounting plate ensures secure…
Replacement rubber feet for sonos sub gen 2 Print from TPU, recommend solid infill (the unit is heavy)
I have an (old) SONOS soundbar that we no longer need for our current TV, as the TV now provides some sort of sound on its own. However, we still wanted to use the soundbar as an additional speaker for listening to music. The question…
Print with PETG at 90% infill with no supports, horizontal on build plate. Link to the screw used as basis for attachment listed below: https://www.mcmaster.com/90184A378/
This is a ceiling mount for the Sonos Era 100 speaker to be used in a 3-Phase Rails system. The mount is to be installed on a power adapter available here . Depending on the direction your rails is installed, you want to used the…
A simple trim piece for the base of the Sonos Era 100. Match your speaker for clean lines or go with an accent color!
A base for holding the wireless charger for Sonos Roam. I have designed this fix the annoying problem with the wireless charger sticking to the Sonos Roam when picking it up. The charger is too light and doesn't stay on the table when…
We have one surround wall-mounted and the other on a small side table. I made a stand for it to sit at ear level. I printed it with 5% gyroid infill, and it's strong enough—no need for more material. The radii aren't G2 curvatures, but…
Sonos Roam Hanging Mount: Keep your Sonos Roam -speaker securely in place and charged whit this mount. Designed specifically for Sonos Roam and the wireles charger, this mount allows you to attach you speaker to a wall, net to your…
This add-on to the Sonos Roam holder, made by Replicators, allows you to attach your speaker to the glass shower wall, so you don’t have to sing without music.
All parts can be printed on a 256 x 256 bed Stands two feet tall by ten inches round Total filament used is about 1.3Kg. The tube is just concrete sonotube cut to length. The port tube is a 1.5inch ID schedule 40 PVC pipe cut to length. I…
Small stand with upward tilt to help with projection! (~8.5 degrees) Total height with Sonos beam on board is 105mm. ~20mm gap height in the rear. ~38mm gap height in the front.
This is a topper mount to place a Home Assistant Voice PE on top of an original Sonos Play:1. This is the model without the built-in microphone. This was printed in its default orientation with regular supports set to snug. I've printed…
This is a bracket for sonos beam (Gen1) with large back clearance as I needed to curve a « hardened » hdmi cable.
SONOS Era 300 Mount heavily inspired by https://www.printables.com/model/824373-sonos-era-300-rotating-wall-bracket but remodeled both parts from scratch. I simplified all mounting hardware to only use a single type of fastener. Important…
Used Festool Multifunction Table MFT 3 - Model and Design Guide https://www.printables.com/model/1094514-festool-multifunction-table-mft-3-model-and-design/ to ensure mount fits MFT table design I took inspiration from Salih3D's Headset…
Attach a Sonos Roam speaker to a wall (or golf cart) with a powerful bar magnet. Recommended Material I recommend printing with a heat-resistant material, like PETG , if you intend to store it in warm places, like a car on a sunny day.…
This is a vertical topper mount to place a Home Assistant Voice PE on top of an original Sonos Play:1. This is the model without the built-in microphone. The vertical mount was very quickly just “bolted on” to my original design. It's…
For music lovers on the go - a perfect fit for the Sonos Roam portable speaker - this custom mount lets you attach your speaker to the “bottle cage” of your bicycle. This is a remix of the great design Sonos Roam Bicycle “Bottle Cage”…
This is a simple solution to mount your Sonos One (and One SL) to a wall outlet. The clean design combines with the wall plate (linked below) will support the speaker and hide the cable and will allow the use of the outlet below. Inspired…
Use this faceplate for the Sonos One wall mount linked below. https://www.printables.com/model/1195170-sonos-one-outlet-mount
Needed a wall mount for our Sonos Arc soundbar. Didn't want to buy one (and wait for delivery) so I spent 30 minutes designing one. My daughter wanted something at the time, so the design is a little rough since she's … persistent. But it…
The Sonos Roam wall mount is designed in two parts that can be printed separately. This ensures you can print the top/bottom part with nice quality and no supports. The wall mount is attached to the wall by a simple rail. This rail holds…
This is a remix of the design from Weshape. I removed 6mm from the back side to place the speaker closer to the wall. It works just as well with the 2nd set of interlocking tabs removed but makes it shallower to the wall. Printed up with…
The tolerances are tight, and it might require some muscle to force the speaker-end of the cord through, but it doesn't even wiggle in the outlet. Print using build plate only supports with the side facing the outlet on the print bed.
Minimalist outlet mount for the Sonos One Gen2 that holds the speaker inverted.
Thanks to Seth for the original design. My Era 300's are on top of my kitchen cabinets, but they have a 2" moulding at the top, so I needed to get them above that. I just added 2.5" of height to the original model. So I sliced it up in…
Two Sconce-like mounts free up desk or shelf surface. The depth and fit holds the charging base securely while the speaker can be lifted away. Held in place by one bolt and two pins positioned to fit the discontinued IKEA desk “Jerker”…
Thread Board Sonos Roam 2 mount Printed in Elegoo PLA-CF Printed on Elegoo Centauri Carbon Wall Loops - 6 Top Shell Layers - 6 Bottom Shell Layers - 5 Infill - 20% 3D Honeycomd Support - Tree(Auto)
A custom front attachment for the IKEA Sigfinn monitor stand, adding functional upgrades for a cleaner and more connected desktop setup. Features: Panel-mount USB-C port (threaded, dashboard-style) Slot for USB front panel (e.g. 2–4 port…
This bracket allows you to connect a Sonos Beam (Gen 2) on the Sonos Beam Wall Mount to a Peerless SR575M TV Cart. You'll need some M8 screws and M8 T-Slot Spring-Loaded Nuts for attaching it to the Peerless cart. I had some spare M8…
This remix is a smaller version of the bracket that attaches to the Play 1. It requires a short 1/4 - 20 bolt (standard tripod thread). The idea with this remix is: Uses less filament to print this “Hook” legs removed Curved wings removed…
I am investigating a Klaxon Sonos sounder with a view to some fun modifications. The main unit's base/PCB is attached to the outer shell using 3x clips. I made this tool to separate them cleanly and easily without damage. Simply push the…
Sonos One Speaker - Modern Vase Cover. FLASHFORGE PETG CF - Grass Green 5% Lightning infill No Supports
Wandhalterung Sonos Roam für die Steckdose. socket holder Sonos
This is the double barreled pistol of Sonoshee from the animated film Redline! It is big, over 340mm tall. although you can scale it done to any size! Prints with NO support! Check out my youtube channel for 3D printing and 3D design…
This is a two-piece Sonos Roam wall mount, allowing you to install the mount, then slide the holder into place. The other models I saw did not have a way to keep the Roam's powered on, so this design supports a 90° USB-C cable so you can…
Designed to mount a Sonos Era 300 smart speaker to a pole securely. Cable management well included. Designed for a 38.5mm pole, or 1.5 inches. You'll need 2 M5 X25 screws, per speaker, to mount the speaker to the plate. And of course, a…
Simple hardware remote control for my Sonos speaker using an ESP32-C3 and a Wi-Fi connection. 3 buttons, wake-up via GPIO. Batteries: 3×AA with 1.2 V, powering the device for months. The full source code of the firmware is available here:…
Quick and dirty stand for the Sonos Play One to mount on a Vesa mount. Note: Speaker is not hard mounted to the mount so is still subject to gravity
I created this Stand for the Sonos Arc Ultra. Additionally, you will also need felt pads for the underside and two screws with a 5 mm thread. i reccomend to print it witch matte materials
I created a simple vertical wall mount for my Sonos Roam to install it in our kitchen. The mount is designed so that a charging cable can also be installed. Printed with Extrudr White NX2 PLA. For the pins you might need to print using a…
So hear me out. I needed a bathroom speaker that is not shit, is Sonos and is not going to break my bank. I got refurbished Ray for measly 120€, but I couldn’t stand how much space does it take. Behold my take on a vertical stand.…
Sonos Roam 2 – Horizontal Wall Mount (3D Printed) Keep your sound crisp, clean, and perfectly positioned with this custom‑designed horizontal wall mount for the Sonos Roam 2 speaker . Built for both style and practicality, this mount…
I have made 3 versions of Height Elevation Wedges for the Sonos Arch Ultra. Based on Peter Pee YouTube guide on “How to place the Sonos Arc for best Atmos effects” Link: https://www.youtube.com/watch?v=hu8TLAco2tI The heights are based on…
I designed this stand after testing different placement angles for the Sonos Era 100. Most desk setups either point the speaker too low or feel unstable, so I focused on improving both sound direction and stability. This version is…
This is a 2 piece wall mount bracket for the new black version of the sonos amp. You'll need: (3) 3mm x 15mm nuts and bolts. (1) 1/4" 20 bolt cut to some length (I'm not sure what it was, I just used a dremel to get it to the needed…
This is a simple angled wall mount bracket for the Sonos Play:1 I designed it without holes, so you can mount the speaker either right side up or upside down. Just use a 1/4-20 hex bolt about 1" long and washers as needed. Attach bracket…
I designed this SONOS Play 1 speaker pedestal to get my speaker above a bowl sink in a bathroom. The plan was for this stand to match the lines of the Play 1 - it's pretty close. I also modeled cord concealment channels so all of the…
This is a product for such a small target group, that it's almost funny. It's for mounting a Sonos Era 300 or Era 100 speaker on a Manfrotto tripod with a standard PL200 base plate. Use two M5x16 screws to hold this plate on the bottom of…
A Philips Hue Play holder to hang behind the Sonos Arc soundbar. It clips into the small vents on the back of the soundbar. Printed with supports only for the three hooks. The Hue Play part is based one the work of @Jens83 with it's Hue…
I designed this because I wanted some extra charging bases for my Sonos Move but they're about $70 each for new ones. Knowing the charging base isn't anything more than an 18VDC power supply, pogo pins, and the base I wasn't going to drop…
Sonos Play:1 Desk Mount with cable channel in the back. Just thought I would post these in case somebody else has the older version speakers and finds them useful. There is washer that fits a 1/4" pan machine screw 1/2" long(homedepot)to…
I needed something that would clear the mount for my monitor arm so my beam could sit further back on my desk. This uses the mounting holes at the bottom of the beam with 2 m3x16 screws.
Replacement hook for the cords on ultrasound machines. Designed to fit the Sonosite(R) portable ultrasound machine used in many emergency rooms. Category: Other
I got the new Sonos roam and wanted a wall mount. So I designed a simple version so that it can be placed with the front facing towards the listener and with enough room behind the speaker for the charger cable. I hope you like it. PLA is…
Here is my simple solution to have a little more space on my work surface. The buttons of the Roam can still be operate
A small extension to the original model to make it wall mountable with support for 3 screws. I tried command strips but the speaker was too heavy(and concentrated) so drilling works better. There is room for the power cable to be…
This is meant as a stand for the Sonos Play:1, which will also allow you to coil up the extra cord within it. The stock cords that came with my Sonos are designed to stick straight out the back while sitting flat on a table, so this does…
The SONOS Roam is by far the best speaker to have in a kid's room (especially when you already have a Sonos system). Taking the speaker into the bed allows the creation of cozy sound “capsules” instead of having a speaker screaming from…
My wife wanted to hang stockings from the Sonos PLAYBAR. So I made these hooks that wrap over the top and hang over the face of the speaker. A small bump on the backside of the hook allows for it to clip into the small notch on the back…
Rotating Wallmount for the IKEA Sonos Speaker: SYMFONISK Additional Part needed: corner brace (DE: Winkelverbinder) Dimension: 90x90x65x2,5 2 Screws: M3x8mm with countersunk (DE: Senkkopf) 3 Parts: Symfonisk Groundplate (Extra Perimeter =…
I found this Stand on thingiverse (https://www.thingiverse.com/thing:5371504) and modified it to fit my ATV and Remotes below .
With the top part for the Sonos Connect:Amp (Gen. 1), the Connect:Amp can be integrated easily and efficiently on a desk. Thanks to the top, the heat of the Sonos Connect:Amp can easily escape even if one stacks things on the Connect:Amp.…
This is the double barreled pistol of Sonoshee from the animated film Redline! It is big, over 340mm tall. although you can scale it done to any size! Prints with NO support! Check out my Youtube channel for 3d printing videos and 3d…
Sonos Connect Amp Gen1 wall mounts brackets. Easy print, I did them at 0.3 layer height, no supports, with a brim in ABS for a fast print. Used #6 screws to attach to wall… Hope you like em.
I printed my model in PLA with 25% infill. Support is required. The stand is stable and has a tight fit.
You can simply print this model using PETG (more durable than PLA) and TPU. TPU is very useful to completely absorb vibration from Sonos diffuser. The diffuser is entirely supported by TPU. Maybe is a good idea increase fill density in…
With these two clamps you can mount a Sonos Ray to a ceiling or furniture. Use two 15mm long M5 bolts to screw the mounts to the back of the Sonos Ray system. Both mounts should be placed 21cm apart (center screw hole to center screw…
With this handy thing you can hang your sonos roam on your shower rack while showering. I would love to see your prints of my design.
I recommend PETG due to the heat. I initially printed in PLA but the heat from the amp eventually deformed the PLA one so you may want to use PETG or some other higher temperature filament.
I found my Sonos Roam speaker would accidentally slide off of its charging base. This print acts as a retainer that makes it less likely that the speaker slides off accidentally. Features: You can still easily remove the speaker by…
Created a tray to store your Sonos Roam on Skadis, but be free to move it around when you need it somewhere else (without needing to unclip it). Printed with PLA, 30% infill and print-on support for the hooks.
Hi I created a part of a holder for a Sonos jukebox for a friend. To hang it up you still need the brackets. But with these basic brackets you can prepare several points to hang it up. To make it more stable because of the layers, I…
A simple stand that turns your Sonos Era 100 into an upfiring desktop speaker! I wanted something lower profile that will fit under my monitor but still gives easy access to the capacitive touch controls, bluetooth pairing, and preserves…
