Sonos Play:1 Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
This is meant as a stand for the Sonos Play:1, which will also allow you to coil up the extra cord within it. The stock cords that came with my Sonos are designed to stick straight out the back while sitting flat on a table, so this does result in a little "loop" of cord sticking out the back before coiling up below the speaker. If it really bothers you, you can get replacement cords that are straight instead of 90, the connector is an industry standard.
I built this model as best I could, and I spent over half a roll of filament printing and modifying slightly... this is as good as I can get it, and it's good enough for me. That said, if anyone else wants to work on tweaking it, here is the tinkercad link: https://www.tinkercad.com/things/e1TB7MtDa9x
In particular, the base could be more smoothly rounded (higher poly curves), and it could have tighter tolerances around the base of the speaker so there was less empty space there. Unfortunately both of these involve more complicated curvature than I am currently able to produce with my meager skills.
Category: Music