1 / 6
Sonos Beam ceiling mount wedge — image 1
1 / 6

Sonos Beam ceiling mount wedge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wedge to install the original Sonos Beam Wall Mount to the ceiling at angle.

Rating
0 / 5
Likes
4
Downloads
67
Makes
0
Views
1,294
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution

While ceiling mount is not a recommended way to mount sound bars, it may be the only location for some projector setups, where you need to mount it above the screen. This wedge allows installation of the original wall mount for Sonos Beam at maximum angle (allowed by the shape of sound bar and the mount) towards the couch.

I used Dremel with sanding disc grit 240 to even out the back surface, finished manually with grit 400 then spray painted with matte black paint (back and sides only). It's mounted with drywall screws first to the ceiling, then add mount with self-drilling construction screws. Assuming 2.5" construction screws at 30°, you need to mount it 21mm (at drywall screw holes) away from the edge of the joist (for 2x6 joists, that's just a little away from its center). The most challenging part is to mount the two wedges in a straight line without going too much off the joist - I did this by mounting the inner drywall screws first and then using a level against the back to make sure the two are in line.

While 30° is a maximum angle you can mount the soundbar (it's touching the ceiling), you can increase the angle by extending distance between wedge surfaces (see the translate operation at the second wedgeShape in the scad source file).

Tags