Desktop stand for humidity and temperature snap in module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop stand for cheap humidity and temperature display. Display is at an angle of 30° - housing is still designed to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Desktop stand for cheap humidity and temperature display.
Display is at an angle of 30° - housing is still designed to print without supports.
Module can be found on eBay like this one (non affiliate link, just random):
https://m.ebay.de/itm/Mini-Digital-LCD-Temperature-Luftfeuchtigkeit-Hygrometer-Thermometer-Set/272620664354
Is designed to be printed on its back like the right one in the picture. It has internal champfers to be printed without supports and max overhang of 45°, which should be no problem on most printers.
Two holes on the sides allow humidity to get into the housing more easily and allow to push on the latches if you need to get the module out e.g. to change batteries.
Print Settings
Printer:
Customized Anet A8
Rafts:
No
No
Resolution:
0.2
25%
Filament: Generic PLA PLA blue
Category: DIY