1 / 8
Auchan Hot Gluegun 100W repair with FreeCAD file — zdjęcie 1
1 / 8

Auchan Hot Gluegun 100W repair with FreeCAD file

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Auchan Hot Gluegun 100W repair with FreeCAD file

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The plastic broke in the trigger, I had to replace it…

I printed it with:

  • ASA (I don't know how much heat need it to endure)
  • 0.2 layer height
  • 0.4 nozzle
  • 3 perimeters
  • 10% infill
  • 4 top and bottom layers
  • no support
  • pins should be printed horizontally with a flat bottom on the bed.
  • 2x BrickBody
  • 1x PinBody
  • 1x LongerPinBody

The spring will be attached to the longer pin. It is a bit tricky to put the cover back on. I used a plastic rod to hold the mechanism in place…

Happy repairing.

Tagi