1 / 8
Auchan Hot Gluegun 100W repair with FreeCAD file
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Auchan Hot Gluegun 100W repair with FreeCAD file
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The plastic broke in the trigger, I had to replace it…
I printed it with:
- ASA (I don't know how much heat need it to endure)
- 0.2 layer height
- 0.4 nozzle
- 3 perimeters
- 10% infill
- 4 top and bottom layers
- no support
- pins should be printed horizontally with a flat bottom on the bed.
- 2x BrickBody
- 1x PinBody
- 1x LongerPinBody
The spring will be attached to the longer pin. It is a bit tricky to put the cover back on. I used a plastic rod to hold the mechanism in place…
Happy repairing.