1 / 4
Soldering Station / Organizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your soldering area clean(er)
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 588
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (35)Powiązane
This is tailored to my specific setup and my specific equipment. Feel free to use it as-is, or maybe it can be inspiration for your own creation.
Model files are as labelled. All the parts pre-assembled, and another with everything already in the correct orientation for printing.
- I printed everything in PLA.
- I used CA glue for assembly.
- The solder flux/paste dispenser holder on top attaches with 4 screws inserted from the bottom (the print has small holes to locate them, but it's up to you to drill them out to the proper size for whatever screws you end up using (it doesn't really matter).
- The right side tool caddy needs ~4~3 heatset inserts M4x4x6. (It's designed with 4, but there's an error in the model I didn't realize until I was already done gluing everything up, which blocks the top rear mounting screw).