Eurorack storage module

This is a little tambour-door storage compartment to put in the spare space in your Eurorack. Keep your patch leads or knurlies or smaller snacks in it. I'd be delighted to hear what you use it for.

8hp and 16hp variations are here, but the Fusion model is parametric and will do whatever hp you like, down to some reasonable minimum. if you don't have Fusion and need other sizes, let me know and I'll make the stls for you.

I'm printing the tambour itself in PETG for flexibility, using 0.2mm layers and orienting the parts to have the first layer at 45 degrees to the slats.

The rest of the parts will be fine in any reasonable filament. I'm using PLA. And I'm using a brim on all the parts other than the floor. You need two end plates, two of each corner, one floor, and one tambour.

Assembly require 8 2.2mm countersunk self-tappers. I'm using 8mm ones, but any reasonable length will work.

A tiny bit of silicone grease in the slot will help the tambour run more smoothly. You only need a tiny bit!