Liczymy pasujące modele…
Some knobs for 6mm D-shaped pots. You can print it and use a marker to paint the indicator line, print with a small inlay piece, print it in Multicolor, or use a small string of filament for the indicator. Use CA-glue to mount the parts.…
This is a little tambour-door storage compartment to put in the spare space in your Eurorack. Keep your patch leads or knurlies or smaller snacks in it. I'd be delighted to hear what you use it for. 8hp and 16hp variations are here, but…
I have a habit of using long cables that I route off the side of the case and then back in so I can bundle them up in the gaps between rows. When I was just using my single case laying flat, the cables would just stay there, but I…
The cables kept falling out of my original rack so I created an improved version. I stick it to the edge of my desk using double-sided tape.
I designed this cable holder to attach to the top of an Arturia RackBrute Eurorack case. It grasps the front and back edges of the case for stability and has a small bin for storing accessories. Cables up to 16" can dangle behind the…
Mod C – Compact 39HP Eurorack Case (177.8 mm wide) Take your modular setup to the next level with the Mod C – a compact 39HP Eurorack case (177.8 mm wide) designed to house your favorite modules. Perfect for desktop and live setups, this…
This remix of AtoV's eurorack patch cable hanger can now carry larger braided cables. It also fix some design mistakes and smooth most of the sharp edges. Fins spacing is now 5.2mm, it doesn't seem to affect strength. I printed it on…
I preordered a VHIKK X and wanted to block off it's space in my rack, so I designed this. 24 HP wide, 3U tall, rough visual representation of the VHIKK X layout.
This is a model i modded for Josh-3D's eurorack case which i kept as true to the original as i could. I only had to modify the mounting holes and add a small cut out on the back. These are mounts that let you attach to the side panels…
This is a relatively low budget (~150€) Eurorack case with PSUs and bus board. Different rail lengths can be used to suit your needs. I used 84 HP rails. The dual Mean Well PSUs offer +-12 V supply rails with up to 3 A of current each. To…
Fits SynthRacks 84HP EuroRack Rails using the M5 csk bolts they supply.
Note: these ears take up 4.5 rack U.
Rack Ears for a 19 inch for Jinja's Eurorack Case Blocks. Recommend m3x12 screws for attachment should work with either standard of rack screws for attaching to the rack Get the caseblocks here:…
This is a 42HP 3U Eurorack case. The structure is interior. With the high side version it may interfere with some modules at the left and right ends of the rack. A version with low sides is also provided for reduced interference with…
When moving some Eurorack gear into a 19" server style rack, I noticed the 84hp frames that were supposed to fit left ~4hp in wasted space on the sides. So I bought some 104hp Synthrotek rails and cut them down to 17 ⅝" (88hp) to give…
Some knobs for 6mm D-shaped pots. You can print it and use a marker to paint the indicator line, print with a small inlay piece, print it in Multicolor, or use a small string of filament for the indicator. Use CA-glue to mount the parts.…
Included are two styles of side brackets for your own DIY Eurorack case and its Gie-Tec rails. Both the 3U and 1U (Intellijel) brackets include countersunk holes for M5 flathead screws for mounting the rails, and M3 flathead woodscrews…
This is a patch cable holder modified to work with the Honeycomb storage wall solution. Print Settings: Material: PLA Layer heigth: 0.2 Perimeters: 4 Infill density: 15% East to snap onto the inserts used for the Honeycomb wall.
Install RK6006 power supply module into your eurorack. Model Selection: Choose the power module that best fits your needs: Without Output on Panel: A streamlined option for those who prefer a minimalistic setup without any external…
Choose the module that best suits your needs: With Power Switch: Perfect for those who want convenient control over their Raspberry Pi without the hassle of unplugging cables. With 0.96" OLED Display: Ideal for users who need real-time…
This is a little tambour-door storage compartment to put in the spare space in your Eurorack. Keep your patch leads or knurlies or smaller snacks in it. I'd be delighted to hear what you use it for. 8hp and 16hp variations are here, but…
Just a simple case for some left over eurorack modules and decided to print my own design. I built a 140 HP on so that it fits to my other Eurorack Case. 12 | 20 | 20 | 10 | 16 | 10 | 20 | 20 | 12 Print setting: PLA with 0.20 mm SPEED (…
M3 screws for eurorack synthesizers. (can be also used for other things as well) The screws are not threaded, so I don't recommend them for systems you are going to move around a lot. If the screw doesn't fit your rails, play around with…
This is a simple base model for an eurorack rail which fits a M3 threaded rod inside. It's just 1cm, you can extend it inside your slicer. I've added also a connector to make multiple rail connectors sturdier. You should put inside it M3…
This case is designed to be used with a Jaspers synth stand, as such it is angled at 30º so that it can sit vertically when mounted. There are holes in each 3U row for a Topobrillo Eurobus power supply, and 3 different style of covers for…
Simple blank panel for your eurorack system Available for the moment in : - 1HP - 2HP - 3HP - 4HP
Presents a mount for a pass through USB port to allow comms with a USB hub mounted inside the rack (used for accessing some prOk drums in this case) This is the USB mount used…
An Intellijel 1U Eurorack panel with 6 holes for standard 3.5mm eurorack synthesizer jacks. Can be used for a multiple, passive mixer, OR gate etc. As it is relatively small, even basic PLA should be strong enough for this print. 14 HP
The original is here: https://www.printables.com/model/694239-eurorack-mic-stand-cable-hanger I remixed to fit on the US threading (⅝") and modeled a cap for the little bit of extra threads that poked through on my mic stand, just to make…
Here are the gerber files and the BOM for a super simple Eurorack compatible PSU. It takes 5 volts and 2.3A and converts it to a bipolar 12 volt supply with the ability to provide 400mA of current. It's perfect for small rigs using analog…
I have a habit of using long cables that I route off the side of the case and then back in so I can bundle them up in the gaps between rows. When I was just using my single case laying flat, the cables would just stay there, but I…
My boyfriend spends a lot of his hard-earned cash on modular synth accessories; I made him some blank panels in matt black PLA+, so he didn't have to purchase them. After receiving the first panel he asked for a different size, and then…
Eurorack faceplate designed to fit in a Pelican 1300 case. The top slot is 4hp for many models of eurorack power options. The bottom is 44hp. The rails are part of the model, for better and for worse. The better means you don't have to…
Enclosure for a USB to Eurorack power supply. Learn Guide: https://learn.adafruit.com/usb-to-eurorack-power-supply
Cablerack for 3.5mm jack eurorack cables. Tape to desk edge with double sided tape. Designed in Freecad 1.0, file included. Photo is of slighly older version but very similar
The blinds have clamping studs, so you can put your favorite building blocks on top and organize your cable mess or make your modular truly special and unique! Eurorack blind with clamping studs on top different sizes: 4 HP, 6 HP, 8 HP,…
Hi! I designed a simple and efficient mount, primarily designed for the Arturia rackbrute 5 hp power module, but I'm quite confident that it will be compatible with most any other 5 hp power module. I have created three (3) versions of…
This is a cable holder that will rest on the handle of your performance case with part of it fitting into the gap of the handle. The insert piece is optional but provides a place to store knurlies, picks, and other odds-and-ends. If you…
A 3D printed Eurorack case! With the provided STLs you can make a 3u case of varying widths, from as small as 26hp to as wide as you want. One unique feature of this case is that some 26hp block's have two slots for a 4hp breakout on the…
This is my first ever Printables post! I hope you like it. I have tested it and it fits perfectly. don't forget to like the design!
I created this to have a convenient place to store screws. also features a system to prevent the drawer from falling out. please click the like button, and dont forget to post a make! : )
Eurorack 3u blank panels with a parametric fusion 360 file. Get fusion 360 for free for personal use. Open the design. Go into modify>change parameters and change the horizontal pitch to the HP of the blank you want. Note there is a…
Case for Eurorack Rails, Standard - Type A, 104 HP Its a symmetrical half, so two have to be printed.
I took the module-left-45hp.stl from Funktional's design, mirrored the sides so it has mounting holes for two end-cheeks, and trimmed it down to 40hp. I did all of that in the slicer, so the model's a little mangled on the inside, but it…
The cables kept falling out of my original rack so I created an improved version. I stick it to the edge of my desk using double-sided tape.
Simple clip to route your patch cables. Fits most screws used for modular systems.
Printable Rails for turning a set of IKEA’s Tavelan shelves into a mini Eurorack Case. All plastic. The only hardware you need is a drill and ⅛” drill bit, eight M3 x 12mm screws, and M3 x 5mm for mounting your modules to the rails. Bring…
Building out my latest patch, I was tired of wires getting in the way and being generally unruly -- so I designed this. Side benefit - it works as a washer for your m3 screws/bolts to prevent unsightly rack rash! Designed in tinkercad. If…
This is a modular, printable, Eurorack rails system. Includes 20HP and 4HP rails to create the usuals commercial lengths. Includes simple and double rails. The holes are for 3M*4*4.6 brass heat inserts nuts. Accepts M3 square nuts in the…
I designed this cable holder to attach to the top slots on an Intellijel 7U 104HP or 84HP performance case. It holds 5x cables (LMNTL cables shown) in each of 10x slots. A shorter variant has 5x slots. I'll create an alternate version of…
I designed this cable holder to attach to the top of an Arturia RackBrute Eurorack case. It grasps the front and back edges of the case for stability and has a small bin for storing accessories. Cables up to 16" can dangle behind the…
This is a modular, printable, Eurorack case and rails system. Includes 20HP and 4HP case parts and rails to create the usuals commercial lengths. Includes simple and double rails. The holes are for 3M*4*4.6 brass heat inserts nuts.…
A 6 HP eurorack front panel with holes for 4 potentiometers and 4 jacks.
A 6 HP eurorack front panel with holes for 2 potentiometers and 6 jacks.
This is a front panel for a 2HP passive eurorack multiple and attenuator. The potentiometer needs to be thin enough to fit under the panel. I added some photos of the potentiometer I used. You need to connect all of the tip lugs of the…
Customized version of https://www.thingiverse.com/thing:2055716 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2055716 Instructions Using the following options: panelThickness = 2 panelHp = 9 holeCount =…
Customized version of https://www.thingiverse.com/thing:2055716 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2055716 Instructions Using the following options: panelThickness = 2 panelHp = 15 holeCount…
This is a 3Hp vent/blank tile for Eurorack
This is a blank tile for Eurorack, 1U 30Hp (Intellijel)
Eurorack case (also works as a standalone case) for the Polaron drum machine. It's not perfect, but it works. It benefits from a bit of a shim on the front side because there's nothing affixing the PCB to the front (the back has a screw…
The LittleBits Synth Filter is basically a Korg MS20 filter. I was about to build my own MS20 Eurorack filter based on one of the many designs online, but then I remembered I already had a Korg MS20 filter in my LittleBits kit. I soldered…
The Behringer Neutron semi-modular synth can be mounted as a Eurorack module, but you lose the breakout panel that includes MIDI thru, USB, and power connector. I didn't want to lose those connections so I gutted the electronics and…
Mod C – Compact 39HP Eurorack Case (177.8 mm wide) Take your modular setup to the next level with the Mod C – a compact 39HP Eurorack case (177.8 mm wide) designed to house your favorite modules. Perfect for desktop and live setups, this…
Mirror from the decrepit blue site. May remix at some point to add holes for power cable, but here's the original for now. frogstompr's Description: Skiff box to convert the Synthrotek Nandamonium eurorack module to console. Also works as…
I needed some blank panels for my large-ish eurorack cabinet, and while they seemed like the perfect thing to 3D print I wasn't happy with any of the designs I found, so I designed my own. Included are several variations in sizes, and the…
This remix of AtoV's eurorack patch cable hanger can now carry larger braided cables. It also fix some design mistakes and smooth most of the sharp edges. Fins spacing is now 5.2mm, it doesn't seem to affect strength. I printed it on…
I preordered a VHIKK X and wanted to block off it's space in my rack, so I designed this. 24 HP wide, 3U tall, rough visual representation of the VHIKK X layout.
This is a model i modded for Josh-3D's eurorack case which i kept as true to the original as i could. I only had to modify the mounting holes and add a small cut out on the back. These are mounts that let you attach to the side panels…
This is a relatively low budget (~150€) Eurorack case with PSUs and bus board. Different rail lengths can be used to suit your needs. I used 84 HP rails. The dual Mean Well PSUs offer +-12 V supply rails with up to 3 A of current each. To…
Fits SynthRacks 84HP EuroRack Rails using the M5 csk bolts they supply.
Note: these ears take up 4.5 rack U.
Rack Ears for a 19 inch for Jinja's Eurorack Case Blocks. Recommend m3x12 screws for attachment should work with either standard of rack screws for attaching to the rack Get the caseblocks here:…
The files to print up 1u Pulp Logic or Intellijel panels compatible with 1/4" p20 heat set inserts as well as a case. I printed these up with a .6mm head and pretty high infill, just for stability. Adjust to taste. The case is a…
Based on a modified version of http://www.thingiverse.com/Amplivibe 's Eurorack panel OpenSCAD program. This is a work in progress: still working on the the best way of applying lettering to the faceplate. There are several STL files:…
This is a 12HP 3U Eurorack pod. The structure is interior. This variation has low sides to facilitate units being combined in a row. Units can also be stacked. The rail “nuts” are 3D printed and are self-tapping with M3 bolts*. Rack units…
A set of two different 2HP eurorack panels for cable management. One version has two less pegs to facilitate hand tightening of knurlies.
A caddy to store up to 25 program cards in a 3 HP Eurorack format.
This model allows you to mount a Roland AIRA Compact synth into a Eurorack case. There is only 8mm space at the rear of the synth, so you will need to use compact right-angled connectors there if you want to use the TRS MIDI or USB-C…
Made these blank panels for my Eurorack modular a few years ago, they served me well. Comes in 4, 6, 12 and 28hp sizes. They may not be 100% dimensionally accurate as these were originally made for my Wanhao i3, so adjust if needed.
I needed a nice way to get a hole in my rack, to get power from the front to the back of the modules.
These blank panels feature oval mounting holes and have been verified for fit on Doepfer A100 and Sinusoda rails. To maintain a clean aesthetic, panels 2HP and larger utilize a two-hole diagonal mounting design (top-left and…
These blank panels feature oval mounting holes and have been verified for fit specifically on Sinusoda rails. To maintain a clean aesthetic, panels 2HP and larger utilize a two-hole diagonal mounting design (top-left and bottom-right).…
Panel based on https://www.thingiverse.com/thing:2055716, added holes for D-Mount Neutrik Style Connectors like XLR or Ethercon or USB
Mount a Power Supply in a Eurorack frame or "Baugruppenträger" Panel based on https://www.thingiverse.com/thing:2055716, added Structure to hold a Power supply like https://www.amazon.de/gp/product/B07PBNCFDG or…
In this remix I changed the OpenSCAD code to handle 1HP and 2HP panel widths. I fixed the vertical hole positions to match the Doepfer A100 specifications. I changed the outside hole placement for panels greater than 3HP. I also adjusted…
A simple set of drill guides for 1U and 3U EuroRack rail positioning. Designed for Vector T-Strut: https://www.vectorelect.com/ts100.html . T-Strut doesn't have 'lips' for top and bottom edges of the panel so spacing is a bit tricky to…
About The SP1 Eurorack Modular Case Why to be limited to modules when it comes to a flexible modular system? Why not also to be flexible with the casing? The SP1 growths with your needs. From the small to-go modular drum synthesiser setup…
This is a "skiff" rack case for Eurorack modular synthesizers. The case is made from 1/4" (6mm) plywood and TipTop Z-Rails w/ bracket . The EPS cut files are for a 104hp wide case with an inner depth of 60mm. The included Fusion 360 CAD…
Here is an 84hp Eurorack skiff case made from a single sheet of 24"x12" 0.25" plywood, in the style of the Moog case. It was designed in Fusion 360 and parameterized so (in theory) you can adjust for varying thickness of wood or for…
A 4HP panel for a hand wired passive multiples module for Eurorack modular synthesizer. The jacks are grouped into three. I print this face down on a glass bed to get a smooth finish. Materials 3 x 3mm LEDs 3 x 10k resistors 9 x 3.5mm…
This was my first OpenSCAD project. It's a blank 4HP panel for Eurorack modular synthesizer systems. I printed it in EPLA Matte Black with no issues. Text can be modified in OpenSCAD.
Stackable 24HP block of Eurorack that can be expanded to a full case with more copies of itself and standard M3 nuts (square and hexagonal) and bolts.
