Standard 10 HP 3U Eurorack Module SP1H10 for the SP1 Modular Eurorack Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
50.8mm standard Eurorack Module with a horizontal pitch of 10 HP (1 HP=5.08 mm). The module can be combined by…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1004
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
50.8mm standard Eurorack Module with a horizontal pitch of 10 HP (1 HP=5.08 mm). The module can be combined by assembling the modules with threaded strips.
Free STL file downloads for other modules available under https://www.spillerphoto.com
Item/Printing Description:
Standard 10 HP 3U Eurorack Module
Material: PLA or PETG
Print Time: Approx. 4 hours
Support: No support material required
Weight: 100 gram
About The SP1 Eurorack Modular Case
Why to be limited to modules when it comes to a modular system? Why not also to be flexible with the casing? The SP1 growths with your needs. From the small to-go modular drum synthesiser setup up to the fully fledged modular home system...or even combine a stationary system with a mobile system. The SP1 can be extended vertical as well as horizontal.
Features of the SP1 - Modular Eurorack Case
- Flexible modular case design
- Horizontal Extendable
- Vertical Extendable
- Build in cable shaft on the back (shaft is accessible with the modules SP1H10CC or SP1 H10DCC)
- Light Weight
- Good Cost/Performance Ratio
Horizontal or angled desktop position* Other currently available case modules
SP1H10 - Standard 10 HP 3U Eurorack Module
SP1H10VC - Standard 10 HP 3U Eurorack Module with vertical connection and cable holes
SP1H10RC - 10 HP 3U Eurorack Module with right cover
SP1H10LC - 10 HP 3U Eurorack Module with left cover
SP1H25GM - 25 HP 3 U Eurorack Module with Grip
SP1H10CC - Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft
SP1H10DCC - Standard 10 HP 3U Eurorack Module with double cable opening
SP1Cap10 - 10 HP front cap
SP1Cap25 - 25 HP front cap
SP1CapRC - 10 HP front cap with right cover
SP1CapLC - 10 HP front cap with left cover...more modules are planned
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2-0.3mm
Infill:
10%
Filament:
Prusament PLA or PETG Galaxy Black
Category: Music