1 / 1
Eurorack 3U to 1U Adapter for Intellijel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert regular 3U eurorack modules to Intellijel’s 1U module
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 235
- Wydruki
- 3
- Wyświetlenia
- 1132
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (28)Powiązane
I currently do not own any 1U modules but I would like to get the most out of my Intellijel 4U Palette case so I created the 3U to 1U Adapter for Intellijel. This adapter converts regular 3U eurorack modules to Intellijel’s 1U module spec. Mount up to a 4hp module or two 2hp modules. This adapter took me about 30 minutes to 3D print. I used 30% infill but as the model is so thin it will hardly be used so feel free to use whatever infill percentage you want.
Assembly
- Place the eurorack modules in the adapter frame and use M3 screws and M3 square nuts to secure the modules to the adapter.
- Plug in the modules power to the case.
- Finally attach the adapter to the case using more M3 screws.