Eurorack Raspberry Pi 5 Module with Pimoroni NVMe Base

Choose the module that best suits your needs:

• With Power Switch: Perfect for those who want convenient control over their Raspberry Pi without the hassle of unplugging cables.
• With 0.96" OLED Display: Ideal for users who need real-time monitoring and visual feedback for their projects.
• Without Any Additions: For minimalists or those looking for a straightforward module design that focuses solely on the primary functions.

Printing instructions

Can be printed with PLA and draft quality (0.3-0.35 mm)

Position the module with the front face down on the print bed for optimal results.

Use supports only on the front face in specific areas: around the screw holes, the display hole, and the power switch hole. This will ensure clean edges and maintain the integrity of these features.

Assembly instructions

Prepare the Standoffs and Flat Ribbon Cable:

• Attach two standoffs to the back side of the module frame.
• Connect the flat ribbon cable securely to the NVMe base and to the Raspberry Pi 5.

Slide and Position:

• Carefully slide the Raspberry Pi 5 with NVMe base into the module frame, ensuring it aligns with the holes for the USB and Ethernet connectors at the front of the frame. 
• Once the Raspberry Pi 5 is positioned, align the NVMe base beneath it, making sure the mounting holes line up.

Secure with Screws:

• Use short screws to fasten the Raspberry Pi 5 to the pre-installed back standoffs.

Install Front Standoffs:

• Place two standoffs at the front side of the Raspberry Pi 5.
• Use two longer screws with nuts (18mm, M2 or M2.5) to secure the NVMe base and Raspberry Pi into the module frame.