Liczymy pasujące modele…
Case for Raspberry Pi 5 using PCIe extention for 4 NVME SSD, coold with Noctua NF-A4x20 5V PWM. Used hadware: 1x Raspberry Pi 5 1x Suptronics - X1016 1x Noctua NF-A4x20 5V PWM 5x metric screw 2,5x10mm 5x 2,5 washer 5x 2,5 nut Assamble top…
Case for a Geekwire gen6 UPS that keeps my PI powered and safely shuts down if 12v power from MacArthur hat fails.
10-Inch Rack RPi "Blade" System (RPi 5 / NVMe / PoE+) There are countless Raspberry Pi rack mounts online, but when I couldn't find a solution for my specific stack of HATs and hardware, I followed the maker’s credo: If you can't find it,…
Printing: Petg (suggested) / pla infill -> 60 (suggested) organic support -> dont put any other type Building case: any m3 screw that would fit there Required stuff: Rpi5 Rpi5 case ->…
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
Haven't printed this myself, but needed to upload it somewhere for it to be printed. Link to the NVMe base here: https://shop.pimoroni.com/products/nvme-base?variant=41219587178579
This is a box for Rpi5 with NVME ssd drive and SonOff Zigbee Dongle To mount this box you will need these standards parts : 1 Raspberry Pi 5 1 Extension card NVME for Rpi5 (Buy with the Heat Sink):…
I have reworked this model a little on request so that it also fits a Raspberry Pi 5. The covers can be exchanged as required and no cables (e.g. from a camera) have to be removed. Printed in PETG with Prusa standard profile, with 0.15 mm…
(This is the thicker Dual SSD version of my Book Case. I have also published a slimmer Single SSD version.) I wanted a good case for traveling and taking my Plex Media Server with me. My requirements for this case: All Ports on One Side 2…
(This is the slimmer Single SSD version of my Book Case with the little SSD on top. I have also published a thicker Dual SSD version.) I wanted a good case for traveling and taking my Raspberry Pi 5 for tinkering. My requirements for this…
Raspberry pi 5 case with Hailo 8 TPU HAT module I designed this case to be compact while generating airflow through a fan directly to the TPU to allow intensive use as a server working 24/7. I also added support for an SSD hard drive. For…
Now you can fit a Pi5 with the Pimoroni NVMe Duo Base!
A remix of LUC4R4TOR's remixed base for double pimoroni NVME base, adding tabs to allow me to screw the base to a bulkhead in my boat. I printed with 3 walls and 4 base and top layers at 0.2mm layer height and a 0.4mm nozzle.
Here is my take on an enclosure for a Raspberry Pi 5 and the Elecrow RC050S 5" capacitive touchscreen. Splitting the back casing into two pieces was meant to reduce support material needed, and of course adds the need for a glue-up.…
This is a case to protect a Raspberry Pi 5 with a Hifiberry DAC+ attached to it. Print it on the side with the lid resting on the print plate. I printed mine with support inforcers for the ports overhang (ethernet, usb and sd card slot).
This is a modified Raspberry Pi 5 case designed for use with the Armor Lite V5 passive cooler and a bottom-mounted NVMe SSD (using the 52Pi SSD Adapter). Screw holes are designed for 4x M2.5 10 screws and 4x M2.5 10 original standoffs…
I didn't have any screws/nuts so added some 'pins' to the tray to secure the pi
Model is made in DSM. Printed on MK4S using PETG filament. May be printed with two colors to show the RPi5 text. Used 25% infill and 0.2mm layer. Available as DSM files from the author.
This remix of the Official Recalbox RGB Dual CASE adds a dedicated, properly placed power button compatible with the Raspberry Pi 5. Please Note: This listing includes only the modified base and the new power button. The cover and other…
Case for Raspberry Pi 5 using PCIe extention for 4 NVME SSD, coold with Noctua NF-A4x20 5V PWM. Used hadware: 1x Raspberry Pi 5 1x Suptronics - X1016 1x Noctua NF-A4x20 5V PWM 5x metric screw 2,5x10mm 5x 2,5 washer 5x 2,5 nut Assamble top…
Case for a Geekwire gen6 UPS that keeps my PI powered and safely shuts down if 12v power from MacArthur hat fails.
10-Inch Rack RPi "Blade" System (RPi 5 / NVMe / PoE+) There are countless Raspberry Pi rack mounts online, but when I couldn't find a solution for my specific stack of HATs and hardware, I followed the maker’s credo: If you can't find it,…
Printing: Petg (suggested) / pla infill -> 60 (suggested) organic support -> dont put any other type Building case: any m3 screw that would fit there Required stuff: Rpi5 Rpi5 case ->…
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
Magenic lid and screwless. You need a 3x10mm magnet IMPORTANT: remove the sd card before inserting the board
A case for the btt tft 50 v2 and the rpi5 and 4
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
Case for Raspberry Pi 5 for adding two INNO MAKER MIPI 7251 RAW Cameras Edit: been having issues getting the 7251 to run so will be trying the OV9281 instead which should have better support. and a Adafruit 9-DOF Absolute Orientation IMU…
Added text/symbols for Power / HDMI / ON as mine is at floor level so awkward to feel for small ports. Added slots for blower fan to vent out end of top case Chamfered SD card slot for larger fingers + thumbs Increased Extrude depth of…
* Thanks for the original designers of both models.
Enclosure for RPi 5 with Pineberry Pi "Hat Drive! Top" [1] (NVMe hat) but mounted at bottom. Yes, top hat mounted at bottom instead of on top. I wanted to mount it that way. Used four M2.5x6mm standoffs and 40mm FFC cable (25mm FFC cable…
I tried out many cases, but somehow my requirements were never met: Silent Case for the Raspberry PI4 and BigTreeTech SKR V1.3 , V1.4 or V1.4 Turbo Be able to Add / Remove electronics quick and easy, while the case can be in place. Small…
All credits go to @ LukasQ , I just mirrored his RPi4 model to also fit for other Pi's. The panel can be mounted to the Pi using a M2.5 screw, a nut as a spacer between the pi and the panel, and another nut to fix it all.
Haven't printed this myself, but needed to upload it somewhere for it to be printed. Link to the NVMe base here: https://shop.pimoroni.com/products/nvme-base?variant=41219587178579
