Modular Eurorack Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable, modular Eurorack rails ready to accept M3 screws. Modular design to allow for various HP dimensions.
- Ocena
- 4,5 / 5
- Polubienia
- 72
- Pobrania
- 422
- Wydruki
- 7
- Wyświetlenia
- 3166
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This is a modular, printable, Eurorack rails system. Various dimensions are provided. Accepts M3 screws which will hold and be re-usable if driven straight. Fowled threads can easily be replaced.
Print both the male and female ends to complete a single rail. “3U” will connect two rails into a 3U configuration.
In practice:
* print the longest parts possible for desired dimensions (each connection introduces some slop)
* print “3U” on it's flattest side with small support under the little tabs that stick out (an imperfect finish on these is desired, better holds the end bits)