Eurorack Patch Cable Holder 3.5mm 1/8 in cables
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw mountable Eurorack patch cable holder. Fits 3.5mm, 1/8in patch cables.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 227
- Wydruki
- 0
- Wyświetlenia
- 1166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
A cable holder for Eurorack patch cables. 11 slots capable of ~10 cables each. Max cable diameter (the part that goes between the tines, NOT the cable head itself) is 3.4mm. This fits all the varieties of patch cables I own, so I'm guessing it will probably fit yours too.
Mount to a surface using three 3mm bolts/screws.
The tines are sloped to support the weight of the cables. I am able to max this holder out with cables without having the tines bend down and cause cables to slide out.
Print settings:
- Print upside down with supports (only supports needed should be the taper of the screw holes)
- PETG
- .3mm height (or smaller if you want a smoother finish)
- 15% infill holds up well for me
Hope this helps you keep your cables organized!